This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately) while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Cable detaches from switch to apply the brakes Requires 12V, 5-amp-hour battery (3801250 - sold separately) Built-in charger automatically charges battery while connected to tow vehicle Battery box attaches to trailer in either a side-load or top-load configuration Includes convenient wiring diagram Durable, plastic case protects the battery (sold separately) from the elements Rubber O-ring seal keeps out moisture Switch and battery box install on trailer frame - drilling required Hardware not included Kit includes breakawayswitch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electric braking systems Charger amperage: 0.5 amps Breakaway cable: 4' long
Replaces the breakawayswitch from your Bright Way trailer breakaway kit. Includes 1 breakawayswitch, cable, and pin.Features: Replaces the breakawayswitch from your Bright Way trailer breakaway kit Fits models 2307, 2308, 2326, 2336, 2337, 2339, 2345, 2346, and 2354 Also works with Tekonsha 50-85-313 Includes cable and pull pin Cable length: 4'
Replaces the switch that came with your Dexter trailer breakaway kit (34-285). This switch signals your breakaway kit to activate your trailer's electric brakes in the event that your trailer accidently separates from your tow vehicle.Features: Replaces the switch that came with your Dexter trailer breakaway kit (34-285) Nylon construction of case and pin ensures durability Lanyard provides a durable tension point between the switch and the tow vehicle Weldable, high-temp metal mounting tab for simple installation Cable and pull pin included Made in the USA Specs: Switch dimensions: 1-1/2" wide x 3" long x 7/8" thick Cable length: 48" Wire length: 46"
Replace your trailer breakaway device with this durable switch kit that features a coiled cord. No more dragging or fraying. No need to wrap cable around your trailer frame.Features: Breakawayswitch wires into your trailer's brake system to provide peace of mind If trailer becomes uncoupled, the cord attached to your tow vehicle will pull the pin from the switch, activating your trailer's brakes Coiled cable won't drag on the ground No frayed ends No need to loop cable around trailer tongue Included carabiner makes it easy to clip cord to your tow vehicle High-strength cable is made of woven steel UV-protective coating on cable boosts durability and is scratch resistant Specs: Cable length: 6' 30-Day limited warranty Similar to FA80-00-2040
Replaces the pull pin on the breakawayswitch that came with your Demco Air Force One or Stay-IN-Play Duo supplemental braking system.Features: Replaces the pull pin on the breakawayswitch that came with your Demco braking system Works with the Air Force One and Stay-IN-Play Duo
Replace the breakawayswitch of your Roadmaster supplemental braking system.Features: Replaces the breakawayswitch for your Roadmaster braking system Works with BrakeMaster (RM-9060, RM-9100, or RM-9160), Even Brake (RM-9400), InvisiBrake (RM-8700), and 9700 (RM-9700) braking systems Limited lifetime warranty
Hey Teo, we have a solution for you but we don't have any harnesses that work as both a tow bar lighting kit and a trailer wiring kit. So what you'd want is the Curt part #C96JR for the tow bar lighting and then for the trailer wiring…
Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…
The Replacement Control Module for Lippert Electric Coach Step #LC301702 has the purple wire that connects to the door light switch. The other end of the switch #LC301694 connects to the Replacement Wiring Harness for Lippert Electric Coach Step…
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
I'm not sure why they said those were your only options, but we do have the correct replacement oil seal for your Dexter 10k hub from 2006, and is the exact replacement for a National 370150BG: - Unitized Oil Seal #10-51 The #10-51 has an inner…
Hi Dale, Yes, it sure does; the wiring for adding a brake controller will be the same for a Sportage and the 2023 Kia Sportage PHEV. What you will use is the following: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector #C99DR -…
Hi Frederick; the cold side of the stoplight switch will be a green wire with a black stripe on your 2024 Kia Telluride LX. Based on the installations we have done it is tucked way up underneath the dash. I went ahead and attached an installation…
To install the Redarc Tow-Pro Liberty Brake Controller #RED24FR on your 2024 Dodge Durango you simply need the Plug and Play Wiring Harness #RED77FR. This will allow you to easily plug all the components together so you are ready to tow your trailer…
I am not aware of any 5 or 6 lug hubs that have a 4-1/4" bolt spacing. We would definitely want to verify that you are measuring your bolt pattern correctly. The best way to measure a 5 lug pattern is to measure from the center of one hole, to…
I can help you troubleshoot your issue on your 2015 Nissan NV3500. First let me answer your question about the use of a converter. You will not need the use of a converter for the utility trailer, because the 7-way on the vehicle is already converted…
Actually most vehicles have a steering wheel lock built into the steering column to prevent the wheel from turning when the key is off. Also, typically when a vehicle is being flat-towed you actually want the steering wheel to be unlocked so that…
This breakawayswitch sounds an alarm when the pin is pulled, so you know it's working. Wire it into your trailer's brake system so if your trailer becomes uncoupled it will activate the trailer brakes, giving you time to move to safety.Features: Breakawayswitch wires into your trailer's brake system to provide peace of mind If trailer becomes uncoupled, the cord attached to your tow vehicle will pull the pin from the switch, activating your trailer's brakes Pull-to-test system offers peace of mind Sounds alarm and lights up the LED when pin is pulled to let you know it's working Installs with self-tapping screws (sold separately) Dimensions: 4-5/16" long x 1-5/8" wide x 1" tall
Replace the wiring harness for the breakawayswitch (RM-650898) of your Roadmaster BrakePro (RM-9300) supplemental braking system.Features: Replaces the wiring harness for the breakawayswitch (RM-650898) of your Roadmaster BrakePro (RM-9300) braking system Length: 10'
Replace the wiring harness for the breakaway kit on your Roadmaster Even Brake supplemental braking system.Features: Replaces the wiring harness for the breakaway of your Roadmaster Even Brake braking system (RM-9400) Overall length: 10-1/2' Limited lifetime warranty
You're replacing a worn breakaway lead before a tow. This cable and pin give you a durable hookup with a 48 inch reach so installation stays simple.Highlights Cable And Pin: Breakaway cable and pin assembly. 48 Inch Length: Allows flexible installation. Vehicle Hookup: Designed for vehicle-side connection. Durable Construction: Pin and cable built to last.
Replace the key of the breakawayswitch on your Roadmaster Even Brake or Brake Pro supplemental braking system.Features: Replaces the breakawayswitch key of your Even Brake or Brake Pro braking system Fits Roadmaster Even Brake and Brake Pro Specs: Dimensions: Overall: 2-1/2" long x 1/2" wide Blade length: 2-1/16" Quantity: 1 key
Replaces the switch that came with your Curt trailer breakway kit. This switch signals your breakaway kit to activate your trailer's electric brakes in the event that your trailer accidently separates from your tow vehicle.Features: Replaces the switch that came with your trailer breakway kit Works with Curt Soft Trac I (C52040 or C52041) and Soft Trac II (C52028 or C52026) breakaway kits Includes cable and pull pin Weldable, high-temp metal mounting tab Silver contact points Nylon case and pull pin
Replaces the pull pin on the breakawayswitch that came with your Demco Air Force One (9599007, 9599019, 9599020, or 9599021) or Stay-IN-Play Duo (SM99251 or SM99243) supplemental braking system.Features: Replaces the pull pin on the breakawayswitch that came with your Demco Air Force One (9599007, 9599019, 9599020, or 9599021) or Stay-IN-Play Duo (SM99251 or SM99243) supplemental braking system Fits: Demco Stay-IN-Play Duo Supplemental Braking System: SM99251 and SM99243 Demco Air Force One braking system: 9599007, 9599019, 9599020, and 9599021
Replaces the cable and pin that connects your tow vehicle to the Curt breakawayswitch. Features 48" of cable with a high-temp nylon pull.Features: Replaces the cable and pin for your Curt breakawayswitch Nylon construction of pin ensures durability Lanyard provides a durable tension point between the switch and the tow vehicle 48" Long cable with pull pin included Made in the USA
You're wiring up a breakaway system and need a switch you can trust. This one's simple. Mount it to the frame, connect the leads, and hook up the pin. If the trailer disconnects, it pulls free and completes the circuit to trigger the brakes.Weather-Resistant Housing: Sealed body protects against road spray and debris. Features to know about Reliable Switch with Built-In Continuity Check This TowSmart breakawayswitch connects to your breakaway battery and trailer brake circuit. When the pin is pulled, the circuit completes and applies power to your brakes.
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakawayswitch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakawayswitch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakawayswitch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 46-1/2" Charger lead wire length: 17" Battery box dimensions: 5" long x 4" wide x 3-1/4" tall Trailer jack mounting hole diameter: 2-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.Quick Tips: When you store your trailer, be sure to keep the pin plugged into the breakawayswitch. If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.Quick Tips: When you store your trailer, be sure to keep the pin plugged into the breakawayswitch. If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it.
If your trailer breaks away from your tow vehicle, your brakes won't work unless they have power. This kit adds a battery and switch to keep the brakes working, and it's required by law on most trailers with EOH disc brakes.Test It Before You Tow: Use the built-in LED tester or pull the breakaway pin to verify the battery and switch are working. Mounts on Your Trailer Frame: Fits anywhere you have space and wires directly to the actuator.
Use with your Dexter electric-over-hydraulic brake actuator to bring your single- or tandem-axle trailer to a stop should it become disconnected from your tow vehicle. System includes charger that maintains battery.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Designed for use with Dexter electric-over-hydraulic brake actuators (K71-650 and K71-651) Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Mounts to the inside of your trailer's frame or camper compartment Top-loading case provides easy access to battery from above Breakawayswitch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakawayswitch, wiring, and breakaway cable Department of Transportation (DOT) compliant Made in the USA Specs: Application: single- and tandem-axle trailers Battery: Voltage: 12V Type: sealed lead acid Capacity: 9 amp-hours Breakaway cable length: 46" Breakawayswitch dimensions: 3" long x 1-1/2" wide Breakawayswitch lead wire length: 45" Charger lead wire length: 14" Battery box dimensions: 6-5/16" long x 3-3/4" wide x 5-3/4" tall Battery box mounting hole spacing: From center-to-center vertically: 3" From center-to-center horizontally: 7" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.Quick Tips: When you store your trailer, be sure to keep the pin plugged into the breakawayswitch. If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it.
The battery case in this breakaway kit can clamp around your trailer frame or jack post. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakawayswitch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, battery box, breakawayswitch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 44" Breakawayswitch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 16-1/2" Battery box dimensions: 5" long x 3-1/4" wide x 3-7/8" tall Trailer jack mounting hold diameter: 3" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
The built-in charger in this kit keeps your battery charged and ready to bring your single-axle or tandem-axle trailer to a complete stop should it become disconnected from your vehicle. LED tester lets you easily check the battery's charge.Quick Tips: When you store your trailer, be sure to keep the pin plugged into the breakawayswitch. If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it.
Use this trailer breakaway kit with your Dexter BrakeRite EHB or BrakeRite II electric-over-hydraulic actuator to bring your trailer to a stop should it become disconnected from your tow vehicle. ... Quick Tips: When you store your trailer, be sure to keep the pin plugged into the breakawayswitch. If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it.
Filters
