Electric-hydraulic brake actuator with brakelines lets you use an electric brake controller from inside your vehicle to adjust and control your trailer's hydraulic brakes. ... To install the brakeline kit on a tandem-axle trailer, the brakelines should be installed as detailed in the above diagram.
When you're towing serious weight, you need more than hope and a prayer. This actuator delivers real braking power and the control to match. Your trailer stays steady, and your hands can steer clear of the white-knuckle death grip.Meets the Mark for the Road: DOT-compliant build is tested and trusted for legal, long-distance hauling. Specs Brake System: Housing Style: Surge-style coupler Actuation Type: Electric-over-Hydraulic (EOH) Brake Compatibility: Disc brakes Coupler: Style: A-frame Ball Size: 2-5/16" Capacity: Gross trailer weight: 16,500 lbs Tongue weight: 1,650 lbs Mounting bolt size: 1/2"
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 12" x 2" Assemblies fit 14.5" to 16" wheels. Made in the USA.Features: Parking-brake-ready brakes let you park your trailer more safely Perfect for pop-up campers, overlanding, and agricultural applications Requires tongue-mounted activating lever and cables (not included) Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Includes mounting nuts (bolts sold separately) Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. Set of 12-1/4" x 2-1/2" Assemblies fits 16" wheels or larger. Made in the USA.Features: Parking-brake-ready brakes let you park your trailer more safely Perfect for pop-up campers, overlanding, and agricultural applications Requires tongue-mounted activating lever and cables (not included) Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12-1/4" diameter x 2-1/2" wide Mounting flange bolt pattern: 4 bolt Wheel size: 16" or larger Axle rating: 7,200 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Designed for single-axle trailers, this hydraulic brakeline kit includes a 20' steel line, a 5-1/2' steel line, a 17" steel line, an 18-7/8" flexible hose, a 3/16" tee, and hardware required for affixing lines to your trailer.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on single-axle trailers with drum brakes Includes: (1) 240" Long steel brakeline (1) 66" Long steel brakeline (1) 17" Long steel brakeline (1) Hose bracket (1) Brakeline retainer clip (1) 3/16" Brake tee (4) Brakeline control clips (1) 18-7/8" Long flexible hose (1) 5/8" Machine bushing (4) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Single Axle Trailers 1. 240" Long steel line runs from the hydraulic actuator to the trailer axle that has brakes. 2.
Designed for single-axle trailers, this hydraulic brakeline kit includes a 15' steel line, a 6' steel line, a 2-1/2' steel line, an 19" flexible hose, a 3/16" tee, and hardware required for affixing lines to your trailer.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on single-axle trailers with drum brakes Includes: (1) 180" Long steel brakeline (1) 72" Long steel brakeline (1) 30" Long steel brakeline (1) 19" Brake hose (1) Brakeline hose bracket (1) Brakeline retainer clip (1) 3/16" Brake tee (4) Brakeline control clips (3) 11" Nylon hose ties 1 Brake fitting 0.125" full flow (1) 5/8" Machine bushing (4) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Single Axle Trailers 1. 180" Long steel line runs from the hydraulic actuator to the trailer axle that has brakes. 2.
The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…
Hey Scott! I recommend using the Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes #HS381-8067. Hydrastar is a reliable, proven brand so it will serve you well. Then for brake lines you can use the Hydrastar Hydraulic Brake Line Kit -…
Hey Tony, welcome back! The Titan Zinc-Plated Brake Actuator item #T43329007K you purchased has a plunger you can access for purposes of bleeding the system of air. You will want to remove the plate that surrounds the breakaway lever to access it.…
Hey Justin, welcome back! The 136" measurement on the Parking Brake Kit #T2385201 is the overall length of the rear cable. It runs back roughly half that length on each side from where it runs through that central bracket. What kind of trailer…
Hey Darrel, to bleed the Dexter Zinc-Plated Brake Actuator #T43397007K that you referenced you would need to use a 2x4 and the safety chains to push on the coupler of the actuator to pressurize it. See attached picture and also the attached help…
Yes, since the hub you currently have has 8-247 stamped on it the Trailer Hub part #8-247-50UC3-EZ that you referenced would be the correct hub for you to use. This hub is 10 by 2-1/4 inch and has a 5 on 4-1/2 inch bolt pattern.
Hey Mike. The Deutsche Hydrapro Alpha G-1600 item #DH94FR and the DeeMaxx Alpha G1600 item #DE47SR have different fittings on them. The DeeMaxx actuator item #DE47SR has a brass fitting/valve that connects to the main brake line, whereas the Hydrapro…
Hey there Lorna. Yes, the Demco Drum Brake Actuator #DM28CV or Demco Brake Actuator Disc #DM33CV will 100% fit your 3" wide 4" tall trailer tongue. Even though the actuator says 3" wide and 2-1/2" tall, it will work because it…
It sure is Steve and congrats on your new SUV! The Blue Ox Hitch item #BLU25QV does indeed fit your new 2027 Ford Maverick. It is definitely compatible with a vertical bike rack as well. The Blue Ox Hitch item #BLU25QV is a class III hitch with a…
The only real difference between using an integrated hub/rotor combo and a separate hub and rotor combo is that if something happens to the rotor and or hub on the separate hub/rotor, you can just replace the damaged component and not the entire…
Yes, the Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes #e58GR that you mentioned is the same thing as the Dexter 89-2 calipers that you mentioned and will work great as a replacement. These calipers will work great with…
Hey Eric, welcome back. The 3-1/8" Long Shackle Straps MORryde Suspension Upgrade Kit for Tandem Axle Trailers item #MR76ZR are going to be the longest option I have for a replacement wet bolt kit. They are compatible with Road Armour equalizers…
Designed for tandem-axle trailers, this hydraulic brakeline kit includes a 15' long steel brakeline, (2) 6' steel lines, (3) 2-1/2' steel lines, a 19" flexible hose, and hardware required for affixing lines to your trailer.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on tandem-axle trailers with drum brakes Includes: (1) 180" Long steel brakeline (2) 72" Long steel brakelines (3) 30" Long steel brakelines (2) Hose brackets (2) Brakeline retainer clips (2) 3/16" Brake tees (4) Brakeline control clips (2) 19" Long flexible hoses (1) 5/8" Machine bushing (4) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Tandem Axle Trailers 1. 180" Long steel line runs from the hydraulic actuator to the trailer axle that has brakes. 2.
Replaces 1 brakeline hose bracket from your Demco single- or tandem-axle brakeline kit. Bracket lets you attach a flexible hose to your trailer.Features: Replaces 1 brakeline hose bracket from your Demco single- or tandem-axle brakeline kit Works with kits DM5402, DM5403, DM5424, DM5425, DM5426, DM5427, DM5428, DM5429, DM5643 Lets you attach a flexible hose to your trailer Includes 1 bracket Made in the USA
Replaces 1 steel retainer clip from your Demco single- or tandem-axle brakeline kit. Clip lets you attach a rubber brakeline to your trailer.Features: Replaces 1 steel brakeline clip from your Demco single- or tandem-axle brakeline kit Works with kits DM5402, DM5403, DM5424, DM5425, DM5426, DM5427, DM5428, DM5429, DM5643 Lets you affix a flexible rubber brakeline to your trailer Includes 1 clip Made in the USA
Designed for tandem-axle trailers, this hydraulic brakeline kit includes a 16' steel line, (2) 6-5/8' steel lines, (2) 17" steel lines, (2) 19" flexible hoses, (1) 36" brakeline, and hardware.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on tandem-axle trailers with drum brakes Includes: (1) 193" Long steel brakeline (2) 80" Long steel brakelines (2) 17" Long steel brakelines (1) 36" Long steel brakeline (1) 3/16" x 4-1/2" Long steel brakeline (1) Hose bracket (8) Brakeline retainer clips (3) 3/16" Brake tees (8) Brakeline control clips (2) 18-7/8" Long flexible hoses (1) 5/8" Machine bushing (8) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Tandem Axle Trailers 1. 193" Long steel line runs from the hydraulic actuator back to the trailer axles. 2.
Upgrade to disc brakes with 4 super rust-resistant slip-on rotors and an electric-over-hydraulic actuator that works with your existing brake controller, and get outstanding braking performance. ... Features: Lets you upgrade your trailer from an idler axle to a braking axle for superior performance Includes electric-over-hydraulic actuator to activate brakes when your brake controller signals No lag or delay - gives you more braking control than a surge-type actuator Compatible with most in-cab brake controllers (sold separately) Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on slip-on rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Delivers smooth, even braking with fast response time Kevlar brake pads dissipate heat and resist wear and tear extremely well Stainless steel piston provides fast, responsive braking Slip-on, over-the-hub rotors fit over standard idler hubs and are held in place by your existing wheel bolts No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Comes with EOH actuator, 4 slip-on rotors, calipers, brackets, and necessary hydraulic lines and fittings Rubber hoses meet DOT and SAE standards and are easier to install than rigid steel lines Specs: Application: tandem-axle trailers Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13-1/8" Piston diameter: 2-1/2" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" Warranty: 7-Year on brakes 2-Year on actuator Alpha G1600 Electric Over Hydraulic Actuator Specs: Maximum output pressure: 1,600 psi Dimensions: 10" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 10-7/8" long x 1-5/8" wide Power: 12V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brakeline fitting) Tank: 15.7 oz - DOT 4 fluid Wiring configuration: Black: 12V DC power Blue: brake controller Yellow: breakaway White: ground Hydraulic BrakeLine Kit Includes: (1) 20' Rubber brakeline (2) 6' Rubber brakelines (1) 3' Rubber brakeline (2) 18" Rubber brakelines 1 Brass 3-way T-fitting 1 Brass cross fitting 12 Brakeline clamps 14 Stainless steel mounting screws 12 Zip ties DeeMaxx Electric-Over-Hydraulic Actuator vs.
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Actuator has an electric lockout that activates automatically to keep brakes from actuating when in reverse.Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 4 Disc brake kits Hub-and-rotor assemblies Grease seals, bearing protectors, races and bearings Calipers with mounting brackets and caliper-mounting hardware attach to 4-bolt brake flanges Hardware for attaching bracket to flanges sold separately Hub/rotors and calipers are constructed of dacromet for superior corrosion resistance Brake actuator Hydraulic actuator synchronizes trailer brakes with tow vehicle brakes Electric reverse lockout lets you reverse without actuating your trailer's brakes Solenoid activates automatically when you shift into reverse Zinc plating is corrosion resistant Breakaway kit included Line kit with brakelines and fittings for a tandem axle Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Bolt-on installation - mounting hardware not included Assembly required Specs: Application: tandem-axle trailers Axle capacity: 3,500 lbs Wheel size: 14" to 15" Overall rotor diameter: 9-3/4" Bolt pattern: 5 on 4-1/2" Brake flange configuration: 4 bolt Actuator Ball size: 2" Mounting: 3" wide channel tongue Capacity: 7,500 lbs Maximum tongue weight: 750 lbs 1-Year warranty Bearing, Race and Seal Information Bearings Inner bearing: L68149 Outer bearing: L44649 Races Inner race: L68110 Outer race: L44610 Seal: RG06-050 Inner diameter: 1.719" Outer diameter: 2.565" Complete Kit Includes: Trailer brake actuator with electric reverse lockout (4) Hub-and-rotor assemblies with bearings, races, seals and bearing protectors (4) Disc brake calipers with mounting brackets Hydraulic line kit (1) 12-27/32" Long flexible hose (4) 17-3/4" Long, 90-degree flexible hoses with inverted flare fittings (1)19' Long steel line (2) 66" Long steel lines (1) 30" Long steel line (2) 17" Long steel lines (1) 4-1/2" Long steel line (5) Hose brackets (5) Hose clips (3) Tees with brackets (8) Line-retaining clips Disc Brakes An increasing number of trailer owners are switching over to disc brakes, and with good reason.
Thick, durable brakeline kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 25', 6', and 4-1/4' brakelines, 3/16" flex lines, plus fittings and hardware.Features: Brakelines and fittings let you run brake fluid from your brake actuator to your trailer brakes Designed for use on tandem-axle trailers with drum or disc brakes Durable, corrosion-resistant copper-nickel alloy lines Flexible and kink-proof design is great for foldaway trailer tongues More economical and easier to install than rigid steel lines Thicker walls compared with standard steel brakeline kits provide additional strength and durability Rubber flex lines are perfect for disc brakes and torsion axles Brass, male, double-flare nut fittings on ends of each hose Corrosion-resistant, brass tee fitting connects 3 hydraulic lines Female inverted flares (FIF) at each port Heavy-duty hose clamps secure hoses to your trailer's frame DOT compliant Kit includes: (1) 25' Long brakeline with 3/8"-24 inverted flare nuts (1) 6' Long brakeline with 3/8"-24 inverted flare nuts (2) 4-1/4' Long brakelines with 3/8"-24 inverted flare nuts (4) 18" Male/female rubber flex lines (1) 3/16" Brass, round T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass, round X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps 1/2" Nylon hose clamps Self-tapping screws Specs: Main line inner diameter: 3/16" Fitting sizes: 3/16" and 3/8" 1-Year warranty
Thick, durable brakeline kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 25', 6', and 4-1/4' brakelines, 3/16" flex lines, plus fittings and hardware.Features: Brakelines and fittings let you run brake fluid from your brake actuator to your trailer brakes Designed for use on triple-axle trailers with drum or disc brakes Durable, corrosion-resistant copper-nickel alloy lines Flexible and kink-proof design is great for foldaway trailer tongues More economical and easier to install than rigid steel lines 3/16" Diameter main line is wider than standard brakelines so fluid can move faster for more consistent braking Thicker walls compared with standard steel brakeline kits provide additional strength and durability Rubber flex lines are perfect for disc brakes and torsion axles Brass, male, double-flare nut fittings on ends of each hose Corrosion-resistant, brass tee fitting connects 3 hydraulic lines Female inverted flares (FIF) at each port Heavy-duty hose clamps secure hoses to your trailer's frame DOT compliant Kit includes: (1) 25' Long brakeline - 3/16" (1) 6' Long brakeline - 3/16" (4) 4-1/4' Long brakelines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass, round T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass, round X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Specs: Main line inner diameter: 3/16" Fitting sizes: 3/16" 1-Year warranty
Thick, durable brakeline kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 15', 6', and 4-1/4' brakelines, 3/16" flex lines, plus fittings and hardware.Features: Brakelines and fittings let you run brake fluid from your brake actuator to your trailer brakes Designed for use on tandem-axle trailers with drum or disc brakes Durable, corrosion-resistant copper-nickel alloy lines Flexible and kink-proof design is great for foldaway trailer tongues More economical and easier to install than rigid steel lines Thicker walls compared with standard steel brakeline kits provide additional strength and durability Rubber flex lines are perfect for disc brakes and torsion axles Brass, male, double-flare nut fittings on ends of each hose Corrosion-resistant, brass tee fitting connects 3 hydraulic lines Female inverted flares (FIF) at each port Heavy-duty hose clamps secure hoses to your trailer's frame DOT compliant Kit includes: (1) 15' Long brakeline with 3/8"-24 inverted flare nuts (1) 6' Long brakeline with 3/8"-24 inverted flare nuts (2) 4-1/4' Long brakelines with 3/8"-24 inverted flare nuts (4) 18" Male/male rubber flex lines (1) 3/16" Brass, round T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass, round X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Specs: Main line inner diameter: 3/16" Fitting size: 3/16" 1-Year warranty
Thick, durable brakeline kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 25' and 6' brakelines, (2) 3/16" flex lines, plus fittings and hardware.Features: Brakelines and fittings let you run brake fluid from your brake actuator to your trailer brakes Designed for use on single-axle trailers with drum or disc brakes Durable, corrosion-resistant copper-nickel alloy lines Flexible and kink-proof design is great for foldaway trailer tongues More economical and easier to install than rigid steel lines 3/16" Diameter main line is wider than standard brakelines so fluid can move faster for more consistent braking Thicker walls compared with standard steel brakeline kits provide additional strength and durability Rubber flex lines are perfect for disc brakes and torsion axles Brass, male, double-flare nut fittings on ends of each hose Corrosion-resistant, brass tee fitting connects 3 hydraulic lines Female inverted flares (FIF) at each port Heavy-duty hose clamps secure hoses to your trailer's frame DOT compliant Kit includes: (1) 25' Long brakeline with 3/8"-24 inverted flare nuts (1) 6' Long brakeline with 3/8"-24 inverted flare nuts (2) 18" Male/male rubber flex lines with 3/8"-24 inverted flare nuts (1) 3/16" Brass, round T-fitting (1) 3/16" Brass union fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps 1/4" Nylon hose clamps Self-tapping screws Specs: Main line inner diameter: 3/16" Fitting sizes: 3/8"-24 1-Year warranty
Thick, durable brakeline kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 15' and 6' brakelines, (2) 3/16" flex lines, plus fittings and hardware.Features: Brakelines and fittings let you run brake fluid from your brake actuator to your trailer brakes Designed for use on single-axle trailers with drum or disc brakes Durable, corrosion-resistant copper-nickel alloy lines Flexible and kink-proof design is great for foldaway trailer tongues More economical and easier to install than rigid steel lines Thicker walls compared with standard steel brakeline kits provide additional strength and durability Rubber flex lines are perfect for disc brakes and torsion axles Brass, male, double-flare nut fittings on ends of each hose Corrosion-resistant, brass tee fitting connects 3 hydraulic lines Female inverted flares (FIF) at each port Heavy-duty hose clamps secure hoses to your trailer's frame DOT compliant Kit includes: (1) 15' Long brakeline with 3/8"-24 inverted flare nuts (1) 6' Long brakeline with 3/8"-24 inverted flare nuts (2) 18" Male/male rubber flex lines (1) 3/16" Brass, round T-fitting (1) 3/16" Brass union fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Specs: Main line inner diameter: 1/8" Fitting size: 3/16" 1-Year warranty
Thick, durable brakeline kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 15', 6', and 4-1/4' brakelines, 3/16" flex lines, plus fittings and hardware.Features: Brakelines and fittings let you run brake fluid from your brake actuator to your trailer brakes Designed for use on triple-axle trailers with drum or disc brakes Durable, corrosion-resistant copper-nickel alloy lines Flexible and kink-proof design is great for foldaway trailer tongues More economical and easier to install than rigid steel lines 3/16" Diameter main line is wider than standard brakelines so fluid can move faster for more consistent braking Thicker walls compared with standard steel brakeline kits provide additional strength and durability Rubber flex lines are perfect for disc brakes and torsion axles Brass, male, double-flare nut fittings on ends of each hose Corrosion-resistant, brass tee fitting connects 3 hydraulic lines Female inverted flares (FIF) at each port Heavy-duty hose clamps secure hoses to your trailer's frame DOT compliant Kit includes: (1) 15' Long brakeline with 3/8"-24 inverted flare nuts (1) 6' Long brakeline with 3/8"-24 inverted flare nuts (4) 4-1/4' Long brakelines with 3/8"-24 inverted flare nuts (6) 18" Male/male rubber flex lines (3) 3/16" Brass, round T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass, round X-fitting (1) 3/16" to 1/4" Brakeline adapter (1) 1/4" to 3/16" Step-down adapter 1/2" Nylon hose clamps 3/16" Nylon hose clamps 1/4" Nylon hose clamps Self-tapping screws Specs: Main line inner diameter: 3/16" Fitting sizes: 3/8-24" Main line length: 15' 1-Year warranty
Designed for single-axle trailers with either disc brakes or a drum-brake torsion axle, this hydraulic line kit includes a 16' steel line, a 17" steel line, a 5-1/2' steel line, (2) 18-7/8" flexible hose, and hardware.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on single, torsion-axle trailers with drum brakes or single-axle trailers with disc brakes Includes: (1) 193" Long steel brakeline (1) 17" Long steel brakeline (1) 66" Long steel brakeline (2) Hose brackets (2) Brakeline retainer clips (1) 3/16" Brake tee (4) Brakeline control clips (2) 18-7/8" Long flexible hoses (2) 5/8" Machine bushings (4) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Single Axle Trailers 1. 193" Long steel line runs from the hydraulic actuator to the trailer axle that has brakes. 2.
For tandem-axle trailers with either disc brakes or drum-brake torsion axles. Includes 16' steel line, (2) 17" steel lines, (2) 5-1/2' steel lines, 1' steel line, 2-1/2' steel line, (4) 18-7/8" flexible hoses, and hardware.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on tandem, torsion-axle trailers with drum brakes or tandem-axle trailers with disc brakes Includes: (1) 193" Long steel brakeline (2) 17" Long steel brakelines (2) 66" Long steel brakelines (4) Hose brackets (4) Brakeline retainer clips (3) 3/16" Brake tees (8) Brakeline control clips (4) 18-7/8" Long flexible hoses (4) 5/8" Machine bushings (1) 12" Long steel brakeline (1) 30" Long steel brakeline (8) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Tandem Axle Trailers 1. 193" Long steel line runs from the hydraulic actuator back to the trailer axles. 2.
Designed for single-axle trailers, this hydraulic brakeline kit includes a 16' steel line, a 17" steel line, a 6-1/2' steel line, an 18-7/8" flexible hose, a 3/16" tee, and hardware required for affixing lines to your trailer.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on single-axle trailers with drum brakes Includes: (1) 193" Long steel brakeline (1) 17" Long steel brakeline (1) 80" Long steel brakeline (1) Hose bracket (1) Brakeline retainer clip (1) 3/16" Brake tee (4) Brakeline control clips (1) 18-7/8" Long flexible hose (1) 5/8" Machine bushing (4) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Single Axle Trailers 1. 193" Long steel line runs from the hydraulic actuator to the trailer axle that has brakes. 2.
Designed for tandem-axle trailers, this hydraulic brakeline kit includes a 16' steel line, (2) 17" steel lines, (2) 6' steel lines, a 4-1/2" steel line, a 2-1/2' steel line, (2) 18-7/8" flexible hoses, and hardware.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on tandem-axle trailers with drum brakes Includes: (1) 193" Long steel brakeline (2) 17" Long steel brakelines (2) 72" Long steel brakelines (1) Hose bracket (1) Brakeline retainer clip (3) 3/16" Brake tees (8) Brakeline control clips (2) 18-7/8" Long flexible hoses (1) 5/8" Machine bushing (1) 4-1/2" Long steel brakeline (1) 30" Long steel brakeline (8) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Tandem Axle Trailers 1. 193" Long steel line runs from the hydraulic actuator back to the trailer axles. 2.
Designed for tandem-axle trailers, this hydraulic brakeline kit includes a 16' steel line, (2) 17" steel lines, (2) 6-1/2' steel lines, a 4-1/2" steel line, a 2-1/2' steel line, (2) 18-7/8" flexible hoses, and hardware.Features: Provides lines and fittings needed to run brake fluid from surge brake actuator to trailer brakes Designed for use on tandem-axle trailers with drum brakes Includes: (1) 193" Long steel brakeline (2) 17" Long steel brakelines (2) 80" Long steel brakelines (1) Hose bracket (1) Brakeline retainer clip (3) 3/16" Brake tees (8) Brakeline control clips (2) 18-7/8" Long flexible hoses (1) 5/8" Machine bushing (1) 4-1/2" Long steel brakeline (1) 30" Long steel brakeline (8) #10-16 UNC x 1/2" self-drilling hex washer-head screws Made in the USA Hydraulic BrakeLine Installation for Tandem Axle Trailers 1. 193" Long steel line runs from the hydraulic actuator back to the trailer axles. 2.
This fitting allows you to connect a 1/4" diameter heavy-duty brakeline to your Hydrastar electric-over-hydraulic actuator, which has a 1/4" port. Brass construction is corrosion resistant.Features: Fitting allows you to attach a 1/4" heavy-duty brakeline to your Hydrastar electric-over-hydraulic actuator Durable brass fitting is corrosion resistant Specs: Fitting size: 1/4" female x 1/4" male 1-Year warranty
Filters
