This 5" diameter x 3" wide wobble roller replaces 1 worn-out roller on your EZ Loaderboat trailer. Thermoplastic rubber outlasts traditional rubber and won't mark up your boat. Ribbing provides extra traction for slippery hulls.Features: Replaces 1 wobble or rocker roller on the roller bunk assembly of your boat trailer Designed for use on EZ Loaderboat trailers Provides additional traction thanks to ribbed design Great for slick or slimy hulls Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in the USA Specs: Application: EZ Loader roller bunk with 1" diameter shaft Diameter of center hole measures slightly under 1-1/16" to fit 1" shaft Bushing length: 1-1/8" (for EZ-Loaderboat trailers) Dimensions: 5" diameter x 3" wide 500YW-8P EZ Yates Rib Rocker Roller for Easy Loader Trailer - Yellow Thermal Plastic Rubber
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features an 8-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 8" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
... This stone guard mounts at the trailer with adjustable panels to improve protection. You keep the front of your boat safe on long hauls and rough access roads.Adjustable Coverage for Trailer Setups Fixed guards can miss the impact zone if they don't line up with the boat and trailer. Modular, adjustable panels can be angled to fit most boat trailers for an aerodynamic fit, giving you a way to tune coverage around the front profile of the boat.
... This stone guard mounts at the trailer with adjustable panels to improve protection. You keep the front of your boat safe on long hauls and rough access roads.Adjustable Coverage for Trailer Setups Fixed guards can miss the impact zone if they don't line up with the boat and trailer. Modular, adjustable panels can be angled to fit most boat trailers for an aerodynamic fit, giving you a way to tune coverage around the front profile of the boat.
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. ... Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 14' - 16' long and sailboats 16' - 20' long
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. ... Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 16' - 20' long and sailboats 20' - 28' long Overall height: 15"
Hey Matt. To add a roof rack to your 2013 Mazda 3 that attaches to those mounting points, you'll want the Yakima SkyLine Roof Rack for Fixed Mounting Points item #Y27TB in black or item #Y82UB in silver. These roof rack kits come with custom fit…
Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 #Y00248 along with SkyLine Towers for Yakima Crossbars #Y53TR. From there you can go with crossbars like the Jetstream…
The Yakima MajorShady 270 Awning #Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's…
While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle.…
Take a look at the video I attached of the Yakima roof rack system being installed on a 2013 Mazda 5. About 20 seconds in you see the installer remove the black covers along the strips on the roof. Under these covers are mounting points for the roof…
The instructions for the Landing Pad 22 #Y00248 specifically state not to overtighten so you don't damage your 2019 Subaru Forester so I definitely don't recommend just going to town on it. What I would do is make sure you have that washer in…
The weight limit of the crossbar is a dynamic weight limit. It is also independent of the rack itself. For example, on your 2021 Mazda 3, the Yakima roof rack has a weight limit of 125 lbs. The maximum weight limit of your roof rack is based on the…
To add a Yakima roof rack to your 2014 Mazda 3 Hatchback with fixed mounting points you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item #Y00425 SkyLine Towers for Yakima Crossbars - Fixed…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. ... Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 20' - 28' long
... This stone guard mounts at the trailer with adjustable panels to improve protection. You keep the front of your boat safe on long hauls and rough access roads.Adjustable Coverage for Trailer Setups Fixed guards can miss the impact zone if they don't line up with the boat and trailer. Modular, adjustable panels can be angled to fit most boat trailers for an aerodynamic fit, giving you a way to tune coverage around the front profile of the boat.
... This stone guard mounts at the trailer with adjustable panels to improve protection. You keep the front of your boat safe on long hauls and rough access roads.Adjustable Coverage for Trailer Setups Fixed guards can miss the impact zone if they don't line up with the boat and trailer. Modular, adjustable panels can be angled to fit most boat trailers for an aerodynamic fit, giving you a way to tune coverage around the front profile of the boat.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 6-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. ... The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat. The rubber roller guides help to center your boat during loading and to hold the boat during transport.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailer bunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade.
... Made to last a lifetime, they resist sun and water without marking your boat.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 7' long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boat trailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.Features: Extra-long U-bolts secures a bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware is sold separately (8) 3/8"-16 Lock nuts (8) 3/8" Washers Includes 2 sets of mounting U-bolts Made in the USA Specs: Fits: trailer frames up to 3" wide x 5-1/4" tall Length: 6" Length of threads: 2-3/8" Bolt diameter: 3/8" Quantity: 2 sets (4 U-bolts)
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 60" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 12-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 12" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 2-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.Features: Carpeted, wooden bunk boards support your boat's hull during trailering Marine-grade black carpeting is strong, soft, and weather resistant Minimizes scratches on the hull Resists mold and mildew Rinses off easily and dries quickly Bunk boards install easily in either of 2 ways Mount to existing brackets on trailer frame Attach to trailer frame with swivel brackets (sold separately), allowing for height and angle adjustment Specs: Quantity: 2 bunk boards Dimensions: 24" long x 2" wide x 4" tall
Aluminum guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers so you keep your boat centered when loading or unloading it. Install posts on your trailer's I-beams. ... Features: Guideposts provide a visual indicator on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Keeps your trailer in sight when backing it down a boat ramp Aluminum posts are lightweight and rustproof White PVC pipes slide over aluminum posts so you can see your submerged trailer Stainless steel hardware secures posts directly to your trailer's I-beam Posts can be adjusted up to 19" away from your trailer Drilling is required Made in the USA Specs: Application: I-beam trailer frames Overall height: 65" PVC pipe diameter: 2-3/8" U-bolt size (center to center): 2" Quantity: 2 boat guide-ons Guide Your Boat Into and Out of the Water When your boat trailer has been backed down the ramp and is partially submerged, these 65" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. Attach directly to bunk boards or use mounting brackets (sold separately).Instead of sliding on and off your trailer's bunk boards, your boat will smoothly roll. This not only simplifies the loading and unloading process, but it also protects your boat's hull against scratches.
Filters
