Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Greg, Great question, and yes level towing is important. The average height for a mid-size to full-size travel trailer is 22 to 28 inches, the average height for an F-350 with 4 wheel drive is 20–24 inches, with that being said you will most…
view full answer...Hello Dorsey, thanks for reaching out. I am sorry to say that we do not offer the ball portion of the etrailer Adjustable 2-Ball Mount #e66PR by itself. This is a newer part, and we have seen a few requests for this specific part in the past. So…
view full answer...Hey Javier, unfortunately Bulletproof does not have a combination 1 7/8" and 2" ball mount. What you could do though, is use the B&W Tow & Stow 3-Ball Mount #BWTS10048B which also has a 10k capacity, 5 1/2" of rise, 5" of…
view full answer...I took a look at the instruction manual for the Furrion Vision S Wireless RV Backup Camera System part #FOS43TASF which is attached below as well and there are a few possible causes of the weak/intermittent signal issues you are experiencing. I have…
view full answer...The correct B&W Companion slider base for the factory pucks on your new 2020 Chevy Silverado 2500 is the part #BWRVB3775. This will hook right up to your existing Companion head so that it can mount to the pucks in your truck bed. The whole hitch…
view full answer...The actual puck itself is a standardized size between each brand so the only measurement that matters is the spacing of the pucks, which differs between each vehicle manufacturer. I've attached a diagram below with the spacings used by…
view full answer...The correct height setting is going to vary by trailer but you can get there taking some measurements. First make sure your trailer is on level ground and then measure from the ground up to the bottom of the king pin. Then on your truck take a…
view full answer...I have a replacement axle option for you, but based on the information I was able to find on your AL-KO 4400lb Axle #402268 it uses an older style of braking assembly that was discontinued when AL-KO was bought out by Dexter. If the brakes on your…
view full answer...For replacement Dexter manual adjust brake assemblies to replace your 36-19 you would want the part #23-27 for the right hand side and part #23-26 for the left hand side. These are manual adjust 10 by 2-1/4 inch Dexter brake assemblies that would…
view full answer...We definitely know about the issue you are referring to. We have just the part for you! Furrion recently came out with a brand new adapter for your 2022 GMC Sierra 1500 Limited to work with your camera system. The part you need is the 7-Way Vehicle…
view full answer...Both the #118781 and the #118753 are indeed confirmed to fit the 2018-2020 Honda Odyssey, both use T-connectors to plug into your tail light connectors, and both are rated at 5 amps for the stop/turn circuit and 7.5 amps for the tail light circuit.…
view full answer...The capacity of the suspension enhancement you install will not increase or replace the capacity that your vehicle currently has. These enhancements are really just to help support your truck's suspension and reduce sag so to improve your ride…
view full answer...Filters
- 5456 results