Use your gooseneck ball to tow your 5th wheel with this lightweight hitch easy to drop in, easy to pull out, and no heavy lifting. The offset base is made to fit truck beds with toolboxes or fuel tanks, ensuring a perfect fit and hassle-free towing.Features: Toolbox-Friendly: The 3-1/2" offset leaves room for toolboxes or fuel tanks in your truck bed Lightweight Construction: At just 35 lbs, the aluminum base is easy to install and remove all by yourself Heavy-Duty Strength: With a 24,000-lb towing capacity and 4,500-lb tongue weight rating, it's ready for serious loads Adjustable Height: Three height settings (16-1/2", 17-11/16", and 18-7/8") let you get the right fit for your trailer Remote Latch System: No more awkwardly climbing into your truck bed with the remote latch/unlatch cable for easy hitching and unhitching Made in the USA: Proudly manufactured in the United States Specs: Fits: standard 2-5/16" gooseneck ball You can use AN27VR (sold separately) for installation if you have a factory-installed hitch with a pop-in ball Gross towing weight: 24,000 lbs Vertical load limit: 4,500 lbs Height adjustments: 18-7/8", 17-11/16", and 16-1/2" 3-1/2" Offset Weight: 35 lbs Lifetime warranty Note: Safety chains (RM3230 - sold separately) are required by law for hitch ball connections.
Tackle crosswinds, rough roads, and heavy loads with confidence. This system includes built-in friction to limit sway and motion-dampening chains to keep your rig from bouncing so you can tow with less stress and more control.It's strong, simple, and easy to store when not in use. No Disconnect Needed: Back Up Without Removing the Hitch Whether you're parking at camp or repositioning on the road, this hitch lets you reverse freely without unhooking. It's a game-changer for solo travelers or anyone who doesn't want to waste time.
Kit replaces your heavy fifth-wheel hitch with a lighter frame that is easier to install and remove and a raised gooseneck ball. Converts your king pin into a gooseneck coupler. ... And because a ball-and-coupler connection has more swivel than a standard fifth-wheel hitch, you'll be able to more easily hook up your trailer on uneven ground.
Tackle crosswinds, rough roads, and heavy loads with confidence. This system includes built-in friction to limit sway and motion-dampening chains to keep your rig from bouncing so you can tow with less stress and more control.It's strong, simple, and easy to store when not in use. No Disconnect Needed: Back Up Without Removing the Hitch Whether you're parking at camp or repositioning on the road, this hitch lets you reverse freely without unhooking. It's a game-changer for solo travelers or anyone who doesn't want to waste time.
Use your gooseneck ball to tow your 5th wheel with this lightweight hitch easy to drop in, easy to pull out, and no heavy lifting. The offset base is made to fit flatbeds with toolboxes or fuel tanks, ensuring a perfect fit and hassle-free towing.Features: Toolbox-Friendly: The 3-1/2" offset leaves room for toolboxes or fuel tanks in your truck bed Lightweight Construction: At just 35 lbs, the aluminum base is easy to install and remove all by yourself Heavy-Duty Strength: With a 24,000-lb towing capacity and 4,500-lb tongue weight rating, it's ready for serious loads Adjustable Height: Two height settings (15-9/16" and 13-9/16") let you get the right fit for your trailer Remote Latch System: No more awkwardly climbing onto your truck bed with the remote latch/unlatch cable for easy hitching and unhitching Made in the USA: Proudly manufactured in the United States Specs: Fits: standard 2-5/16" gooseneck ball You can use AN27VR (sold separately) for installation if you have a factory-installed hitch with a pop-in ball Gross towing weight: 24,000 lbs Vertical load limit: 4,500 lbs Height adjustments: Height adjustments: 15-9/16" and 13-9/16" 3-1/2" Offset Weight: 35 lbs Lifetime warranty Note: Safety chains (RM3230 - sold separately) are required by law for hitch ball connections.
For use with the Rapid Hitch adjustable ball mount system for 2-1/2" and oversize 2" receiver hitches, this set includes a hitch receiver lock to secure shank to receiver and a locking adjustment pin to secure ball housing to shank.Features: Anti-theft, keyed locks keep your adjustable ball mount securely attached to your tow vehicle Locking set works with Rapid Hitch adjustable ball mount systems Rapid Hitch systems are made for 2" square trailer hitches but can be adapted for use with 2-1/2" square hitches with a 2-1/2" to 2" receiver adapter (sold separately) Hitch receiver lock designed for 2" x 2", oversize 2" x 2", and 2-1/2" x 2-1/2" trailer hitches Stainless steel construction Offers superior strength and durability and is rustproof 2 keys (included) are keyed alike 1-Year limited warranty Specs: Application: Rapid Hitch adjustable ball mount systems Capacity: 10,000 lbs Adjustment locking pin dimensions (AM3428) Pin diameter: 5/8" Inside width: 4-1/4" Overall length: 7-1/2" Hitch receiver lock dimensions (AM3429) Pin diameter: 5/8" Inside width: 3-5/16" Overall length: 6-1/2"
Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…
Hey Steven, thanks for reaching out. The Reese 5th wheel rails are industry standard rails. Meaning the length and hole spacing for those will be the same as any other major brand. You can absolutely re use the rails from your 2012 F250 on your 2000…
The #3015-P harness that is used to install a brake controller in your 2007 Chevy Silverado installs in the electric junction box that is under the dash of your vehicle. It's a black box to the left of the brake pedal. Check out the FAQ, video…
Hey Jeffrey, the Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is only designed to attach to the truck by the gooseneck ball that is in the truck bed. This is more of a universal type fifth wheel hitch solution and would not…
Hi Bruce; the MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV doesn't have any real vertical movement. However, the rubber spring will still absorb and dampen road shock at the connection point within the pin box. The rubber sheer spring…
Hey John! The Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY37ND is not Lippert approved yet. This is designed to replace a pin box with a Lippert Rhino bolt pattern, and is the same exact length as the factory pin box. Gen-Y does stand behind…
It is unlikely that the movement of the 5th wheel trailer would be able to move the rails to such a degree as to damage the truck bed. The rails on the CURT X5 Fifth Wheel Adapter, #16310, are not like regular rails. They have extra steel on the…
We have not heard of any compatibility issues with the 2010 Dodge Ram 2500 with B&W gooseneck hitch and the Curt X5 adapter #16310 so you would be good to go. I have linked a video review of the adapter for you.
Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…
Hey Fred, with the Demco adapter plate part #DM6333 it's not necessary for there to be resistance in the levers as you turn them to secure it to your truck's puck kit. As long as they turn all the way and can be locked in that position…
Hey Leonard! Yes, you can use the hitch pin hole furthest away from the head to install the Andersen Weight Distribution Hitch #AN53VR in your receiver. Both of the hitch pin holes can be used to secure the shank. What kind of trailer are you…
Hey Thomas, the RVIA code is that everything above the belly pan of the RV has to be copper until you reach the appliance. Rubber would be easier though wouldn't it?
Tackle crosswinds, rough roads, and heavy loads with confidence. This system includes built-in friction to limit sway and motion-dampening chains to keep your rig from bouncing so you can tow with less stress and more control.It's strong, simple, and easy to store when not in use. No Disconnect Needed: Back Up Without Removing the Hitch Whether you're parking at camp or repositioning on the road, this hitch lets you reverse freely without unhooking. It's a game-changer for solo travelers or anyone who doesn't want to waste time.
Don't say goodbye to your truck bed. Instead, say hello to the Ranch Hitch fifth-wheel-to-gooseneck coupler adapter. The 8" offset allows more clearance between truck and trailer for short-bed trucks. 24,000 lbs GTW and 6,000 lbs TW.This allows you to tow your fifth-wheel trailer without a bulky fifth-wheel hitch. The Ranch Hitch from Andersen Manufacturing is easy to install, even for the inexperienced do-it-yourselfer. Measuring Your Truck and Trailer for the Ranch Hitch Coupler Adapter You can perform these steps to determine if the adapter will work for your fifth-wheel trailer.
Quickly and easily convert your B&W Turnoverball gooseneck hitch to a sturdy 5th-wheel trailer hitch. Wide-stance base offers fore/aft and height adjustments to fit your application. Dual-jaw hitch removes without a trace for full bed access.The RV post is square like the base of your gooseneck hitch ball. This square design helps to eliminate any twisting or turning of the post - and therefore the mounted fifth-wheel hitch - in your gooseneck hitch.
Of all the hitches we tested, this is our favorite. It fixes sway, creates superb handling, and levels your ride - silently. Rotating chain-style, clamp-on brackets make setup easy. ... Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Superior and silent sway control Hitch head has a slight angle built into it that helps your trailer self-center Constant tension in trunnions helps force trailer in line Chains are kept tight and secure to keep spring bars from moving Quick and simple to use thanks to rotating brackets No more snapping up highly tensioned spring bars Insert lift chain into slot and rotate lift bracket with the included wrench Simple installation process Hitch head with preset pitch is ready to go right out of the box Trunnion bars easily lock in place with included pin and clip Clamp-on brackets require no drilling Grease zerks inside head assembly make maintenance simple and clean Powder coated steel is durable and corrosion resistant System includes head assembly, adjustable shank, spring bars, lift chains, rotating lift brackets with handles, reducer bushing for ball shank, pin and clip, hitch ball, and all necessary hardware Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 750 lbs - 1,000 lbs Gross towing weight: 10,000 lbs Ball size: 2-5/16" Lift-bracket positioning: mount about 29" back from center of coupler Maximum trailer frame height: 6" Shank length: 13" Maximum rise: 8" from top of hitch receiver opening Maximum drop: 2" from top of hitch receiver opening Adjustment holes are spaced 1-1/4" apart on center Limited lifetime warranty Included w/ BXW1000 Required - Sold Separately Optional Add-Ons Adjustable Shank System Head 2-5/16" Hitch Ball Lift Brackets Spring Bars n/a n/a If you're looking for an American-made hitch that rides quietly, offers a quick and easy setup, and provides you with supreme handling, the Blue Ox SwayPro might be just what you're after.
Don't say goodbye to your truck bed. Instead, say hello to the Ranch Hitch fifth-wheel-to-gooseneck coupler adapter. It offers 24,000 lbs towing capacity with 3" vertical adjustment for towing a fifth-wheel trailer with a gooseneck hitch.This allows you to tow your fifth-wheel trailer without a bulky fifth-wheel hitch. The Ranch Hitch from Andersen Manufacturing is easy to install, even for the inexperienced do-it-yourselfer. Measuring Your Truck and Trailer for the Ranch Hitch Coupler Adapter You can perform these steps to determine if the adapter will work for your fifth-wheel trailer.
Works with all standard brands of gooseneck hitches Base weighs only 35lbs Ball funnel for easy hook up even 4" off ball center Base can be removed or installed in less than a minute Complete installation in less than 5 minutes Can easily be installed or removed by just one person Features a patented remote latch/unlatch cable Rated at 24,000 lbs GTWR and 4,500 lbs tongue weight Three height adjustments: 16-3/4" lower position, 17-7/8" middle position and 19-1/8" upper position (from bed of truck to top of ball mount)
Avoid the hassle of wrestling with spring bars! Just hook up this easy-to-use alternative to the traditional weight-distribution system. Unique, patented system uses lightweight urethane springs to distribute weight and control sway.By applying leverage at your hitch, this system transfers the weight that normally pushes down on your vehicle back onto all the axles of your tow vehicle and trailer, thereby keeping both tow vehicle and trailer level and their weight evenly distributed.
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Adjustable shank included.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Sway control keeps your trailer from getting pushed off course Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Comptible with surge-type brake actuators Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Powder coated steel is durable and corrosion resistant Includes head assembly, adjustable shank, spring bars, sway control brackets, lift handle, hitch ball with 1-1/4" diameter shank, and all necessary hardware Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 400 lbs - 800 lbs Gross towing weight: 8,000 lbs Sway control bracket positioning: 24" - 27" back from center of coupler Maximum trailer frame height: 6" Shank length: 8" From center of hitch pin hole to center of adjustment holes 9" From center of hitch pin hole to front of shank 7" From center of hitch pin hole to back of shank 12" Overall Total height adjustment along shank: 7-1/2" Maximum rise: 5-3/4" Maximum drop: 3-1/2" Overall height: 8-1/2" Holes are spaced 1-1/4" apart on center 10-Year warranty Included w/ System Required - Sold Separately Optional Add-Ons Weight Distribution Head 2 Sway Control Brackets 2 Spring Bars Snap-Up Lever Spacer Rivet and Washers Necessary Installation Hardware - n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Tow your fifth-wheel trailer with your gooseneck hitch and get the smooth ride that only an air-ride-equipped coupler can deliver. This goosebox and coupler adapter kit has a built-in air bag and bumpers that reduce chucking and absorb road shock.Features: 5th-Wheel-to-gooseneck adapter kit lets you tow your 5th-wheel trailer with your gooseneck hitch Heavy-duty goosebox replaces Lippert 1716, 1116, 0115, or FabEx 500, 503, 520, 530, 560 pin boxes Coupler attaches to your truck's gooseneck hitch ball Shock-absorbing coupler uses an air bag and cushioned bumpers to provide a smooth and comfortable ride Limits chucking and jerking to give you better control of your vehicle and trailer Helps extend the life of your truck and trailer by protecting them from unnecessary wear and tear Easy-to-use, lockable lever lets you connect and disconnect the coupler from the hitch ball Simply use the lever to engage or disengage the locking mechanism Dual locking bars hold ball in place to provide added security and help reduce rattle Adjustable air bag lets you easily adapt the coupler to suit your trailer's load Ensures just enough shock absorption for your setup and not so much as to cause a stiff ride Grease zerk fitting at the pivot point makes lubrication and maintenance easy Steel tubing and 4140 cast steel socket provide maximum durability Shot blasted and powder coated to prevent rust Made in the USA Specs: Designed to replace the following pin boxes: Lippert 1716, 1116, and 0115 FabEx 500, 503, 520, 530, and 560 RBW 7028 Curt M19 Rota-Flex Ball size: 2-5/16" Gross towing weight: 24,000 lbs Vertical load limit (maximum tongue weight): 6,000 lbs Coupler stem outer diameter: 4" Distance between pin holes: 2-5/8" 1-Year limited warranty Notes: You will need safety chain adapters to install your mandatory safety chains.
The remote cable system for the Ranch Hitch fifth-wheel-to-gooseneck coupler adapter allows you to engage and release the coupler while standing alongside your truck, rather than climbing into the bed to do so.Features: Works with Ranch Hitch 5th-wheel-to-gooseneck coupler adapter, both straight and offset models, using 4-bolt plate The 4-bolt plate is part of the second Ranch Hitch universal adapter series and has 4 bolts on the box where the cable enters the unit near the coupler Adds convenience during tow preparation - don't have to climb in the truck bed to engage the coupler Includes replacement cable system with 4-bolt plate Made in the USA 1-Year limited warranty Replaces AM3105 Replacement Remote Coupler with 2 Bolt Plate
If your factory gooseneck hitch has a pop-in ball, this adapter is the missing piece to mount your Andersen Ultimate Connection Hitch and tow your 5th wheel. No adapter means no towing, so slap this bad boy in and hit the road with confidence.Features: Seamless Compatibility: Replaces the pop-in ball in your gooseneck hitch so you can install the Andersen Ultimate 5th-Wheel Connection Enhanced Strength: Adds up to 33% more strength to your Ultimate Connection, so you can tow with confidence Perfect Fit: Snaps right into your factory OEM gooseneck hitch Made in the USA: Proudly manufactured in the United States Specs: Fits: factory gooseneck hitches with pop-in balls Weight: 4 lbs Lifetime warranty Note: Safety chains (RM3230 - sold separately) are required by law for hitch ball connections.
This trailer jack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. It's lightweight, sturdy, and takes the hassle out of setting up your campsite.
Heavy-duty, stainless steel hitch locks provide superior security for your Lock N Roll articulating hitch with 2" receiver. Flush design helps to deter theft. ... Features: Flush-style hitch locks replace the standard pins for your Lock N Roll articulating hitch coupler Short lock secures articulating coupler to your 2" trailer hitch Long lock secures the trailer-end coupler to the articulating coupler Heavy-duty, rust-resistant stainless steel construction O-rings protect internal components from dirt and grime Weather-resistant, tethered dust caps keep water and debris out of keyways Lock cores are keyed alike 2 Keys included Made in the USA Specs: Application: Lock N Roll articulating hitch for 2" receivers Safe working load limit (WLL): 7,000 lbs Dimensions of long lock: Overall length: 6-3/8" Inside length (span): 3-3/4" Pin diameter: 1/2" Dimensions of short lock: Overall length: 5-1/4" Inside length (span): 2-5/8" Pin diameter: 5/8" 1-Year limited warranty
The 180 hitch has a chrome-plated double-sided tow ball, so switching sizes is a breeze. Tow up to 8,000 lbs with the 2" ball or up to 12,500 lbs with the 2-5/16" ball. ... A dual-sided hitch ball with a 1-7/8" and a 2" hitch ball (TB03 - sold separately) is also available. This ball mount's convenient stowable design keeps the ball mount platform out of your way when you're not towing.
Heavy-duty, stainless steel hitch locks provide superior security for your Shocker Hitch Air (12K), HD Air (16K), XRC, or XR ball mount. Flush design helps to deter theft. ... Features: Flush-style hitch locks replace the standard pins for your 2" or 2-1/2" Shocker Hitch Air (12K), HD Air (16K), XRC, or XR ball mount Hitch lock (short pin) secures ball mount to your 2" or 2-1/2" trailer hitch Long locks secure the ball mount platform to the ball mount Heavy-duty, rust-resistant stainless steel construction O-rings protect internal components from dirt and grime Weather-resistant, tethered dust caps keep water and debris out of keyways Lock cores are keyed alike 3 Keys included Made in the USA Specs: Application: Shocker Hitch Air 12K and HD Air 16K receivers Shocker Hitch XRC cushioned and XR adjustable ball mounts Safe working load limit (WLL): 21,000 lbs Pin diameter: 5/8" Dimensions of long lock: Overall length: 7-1/4" Inside length (span): 4-5/8" Dimensions of short lock: Overall length: 5-3/4" Inside length (span): 3-1/8" 1-Year limited warranty
This weather-resistant lock functions as an anti-rattle hitch lock for the original glideAWAY bike rack and the RotoHitch hitch extender. Includes 2 keys.Features: Threaded hitch lock works as an anti-rattle lock for Advantage SportsRack glideAWAY bike rack (2200, 2250) and HitchMate RotoHitch hitch extender (HE5990) Key cover helps keep out dirt and moisture 2 Keys are included Specs: Fits: 2" x 2" trailer hitch receivers Pin diameter: 5/8" Limited lifetime warranty 6001 Hitch Mate 2" Anti-Wobble Hitch Lock by Heininger Holdings
Designed for 2", 2-1/2", and 3" hitches, this lock has a covered keyhole and chrome plating to prevent corrosion. Steel construction ensures long-lasting dependability. ... Features: Flush-style trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory Secure your bike rack, cargo carrier, hitch cover and more to your trailer hitch Extended-length pin ensures excellent fit on wider than average, factory 2" hitches and standard 2-1/2" and 3" hitches Pick-proof screw-and-lock security Hardened steel construction ensures long-lasting dependability Double chrome plated for maximum rust resistance Rubber end and textured lock core make it easy to grip Covered key slot prevents internal corrosion 2 Reversible, automotive-style keys included Locks can be keyed-alike to match other etrailer locks Select "Keyed Alike" from drop down menu above and enter number of locks into Quantity box Made in the USA Specs: Application: 2" x 2", 2-1/2" x 2-1/2", and 3" x 3" trailer hitch receivers Inside pin length (span): 3-5/8" Overall length: 6-7/8" Pin diameter: 5/8" 1-Year warranty Note: Lock can be keyed alike to match other etrailer locks.
This rust-resistant, stainless steel hitch lock is designed to fit standard 2" hitches. Covered keyhole helps to prevent internal corrosion. Can be keyed alike to match other etrailer locks.Features: Flush-style trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory Secure your bike rack, cargo carrier, hitch cover and more to your trailer hitch Pick-proof screw-and-lock security Solid stainless steel pin and lock housing are extra-durable and rust-resistant Rubber end makes pin easy to grip Covered key slot prevents internal corrosion 2 Reversible, automotive-style keys included Locks can be keyed-alike to match other etrailer locks Select "Keyed Alike" from drop down menu above and enter number of locks into Quantity box Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Inside pin length (span): 2-5/8" Overall length: 6" Pin diameter: 5/8" 1-Year warranty Note: This lock will not work with double-walled hitches or factory 2" trailer hitches that have an outside width greater than 2-5/8".
Filters
