The hydraulic bottlejack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.Using a Unijack Begin using the Unijack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift. Determine the best lifting point to support the bottlejack and line up the piston ram underneath it. Once everything is lined up correctly, turn the lever switch at the base of the piston clockwise to allow you to move the piston up and down.
If you off-road but space is tight, this Tallboy kit gives you both lifting and support in one setup. The 6-ton bottlejack reaches high-clearance rigs, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Free Up Your Jack: Transfer the raised load to the stand so you can reposition the bottlejack for the next step. Stay Planted on Rough Ground: Oversized jack base gives you a broad foundation on gravel, sand, dirt, and other uneven surfaces.
If you off-road but space is tight, the Tallboy kit gives you both lifting and support in one setup. The 2-ton bottlejack handles ATVs and side-by-sides, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Free Up Your Jack: Transfer the raised load to the stand so you can reposition the bottlejack for the next step. Stay Planted on Rough Ground: Large jack base gives you a broad foundation on gravel, sand, dirt, and other uneven surfaces.
If you off-road but space is at a premium, the Tallboy is a compact bottlejack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
If a tire gives out on your camper, you need a jack that handles the weight. The Tallboy combines compact size with 12-ton lift capacity and provides some serious lift. And the oversized base plate helps with stability on rough ground.Even when the shoulder is a little rough, the oversized base plate helps the jack stay planted and secure. You can use the swappable saddles to lift from the axle or the frame, depending on what's safest. And if you want additional stability, a jack pad (like the Outrigger Pad or StakPad ) can add another layer of support.
If you off-road but space is at a premium, the Tallboy is a compact bottlejack that can still create some serious lift. The large base plate gives you a solid foundation on the trail. It packs away to about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…
Hey Marc, sorry for the delay in getting back to you. I checked your question history and I don't see anything from a few weeks ago which can sometimes mean there was a typo in your email address and we sent it to wrong person. This rack has a…
Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…
Hey Joe, thanks for the information! To replace your Dexter 072-079-01 leaf springs, I recommend the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles item #EM28AJ. This is a 4,000 lbs leaf spring designed for 8,000 lbs axles. It's got 7-leafs…
Hey Todd! At the lowest setting, the saddle of the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR sits at 14" and the top of the saddle arms are at 15-3/8". I took a photo of it out in our warehouse, and while I wasn't able to get…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hi Laurie! It's nice to hear from you. The Flap Jack is a great product but I would not recommend using the Flap Jack with your setup, mainly because your SnapPad brings the foot to about a 10 inch round diameter and the top of that block is…
Hey Clay welcome back! The correct grease seal for your Dexter 5,100 lbs axle is item #DX72UR. This is a pair of seals that are sized specifically for your 5,100 lbs axles spindles. These are manufactured by Dexter and matches their OEM parts. If…
They Thomas, I'd be glad to help you pick out which tire pressure monitor system would be better for you. So generally what we have found is that the TST system part #TST-507-RV-4-C is a bit more rugged and will withstand a little more abuse…
Hey Carlos, thanks for the information and your patience. I reached out to Dexter with your information last week and still haven't heard back. There's two options to replace the grease seal on your Dexter 5,200 lbs axles. 2.125" ID -…
Hello Eric, Welcome to etrailer, I'm glad you found us! You can definitely make that upgrade, and I think you'll be much happier with the Furrion Chill Cube. The variable speed compressor is designed to adjust its output based on the cooling…
... The bottlejack locks into place for a stable, safe lift.Features: Raises, lowers, and stabilizes high profile vehicles, house foundations, and heavy equipment Great for garages, shops, or to keep as a spare in your vehicle Handle locks into place to assure a secured upright position Steel saddle and cast handle socket Meets ANSI standards Specs: Weight capacity: 2 tons Lift: 6-3/16" - 12-1/16" Base dimensions: 3" wide x 3-1/2" long 1-Year warranty Note: This jack is designed to lift and stabilize 2 tons and should not be used to lift over that weight. Using a BottleJack Begin using the bottlejack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
This jack's footplate is more stable than that caster wheel and block you're using. Premium zinc finish has a 500-hour salt spray rating - great for trailers near saltwater. ... The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion. How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. Marine-grade, zinc finish is perfect for boat trailers. ... The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion. How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer tongue high enough to allow you to couple it with your vehicle.
If you wrench on a lifted Jeep, Bronco, UTV, or other high-clearance rig, conventional stands may not reach. The Tallboy supports up to 6 tons across seven positions from 10-13/16" to 28-3/4", then breaks down into a compact travel bag.Its modular extension tubes let you configure the stand around the support point, giving you one setup that can work across substantially different heights. Support the Load and Move Your Jack The Tallboy jack stand complements Power Mountain's Tallboy bottlejacks by taking over the support job after the load is raised.
The hydraulic bottlejack lifts, holds, and locks vehicles in place without jack stands. Fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 18-3/8" Lift range with 2 ton capacity.Using a Unijack Begin using the Unijack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift. Determine the best lifting point to support the bottlejack and line up the piston ram underneath it. Once everything is lined up correctly, turn the lever switch at the base of the piston clockwise to allow you to move the piston up and down.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area. Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area. Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area. Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area. Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery.
This general-purpose, blue threadlocker locks and seals a variety of threaded assemblies, preventing unwanted loosening of nuts and bolts and thwarting corrosion of treated parts. Medium-strength formula isn't permanent, easing disassembly.Features: General-purpose, medium-strength thread-locking liquid keeps nuts and bolts securely tightened Treated threads resist corrosion Assembled parts can be taken apart easily with hand tools Made in the USA Specs: Application: 1/4" to 3/4" (6-mm to 20-mm) nuts and bolts Quantity: 1.22-fl oz bottle (36 mL) Fixture cure (time required to become tacky): 10 minutes Full cure (time required to reach full set): 24 hours Temperature range (endurance limits of threadlocker): -65 F to 300 F Applications: Bolts for drive shaft, valve cover(s), water pump, oil pan and shock absorbers Nuts for rocker arm adjustment Studs and mounting screws for carburetors Bolts used in trailer hitch installation Small fasteners Motorcycle mirrors, fenders and handlebar brackets Boat fuel pumps and cable anchors Industrial diesel injectors, manifold bolts and differential cover mounting bolts The shaded areas in these diagrams illustrate where threadlocker should be applied in a variety of assemblies: Threadlocker 242 is applied as a liquid to the threads of screws, nuts and bolts before assembly to keep them securely tightened, even when vibration occurs.
High-strength red threadlocker permanently locks and seals metal nuts and bolts up to 1" in diameter. Resists vibration, moisture, rust, and corrosion. Sets in 10 minutes.Specs Application: Metal threaded fasteners Fastener size: up to 1" diameter Strength: high Cure Time: Set time: 10 minutes Full cure time: 24 hours General: Color: red Container size: 6 mL Removal: heat assembled parts to 500 degrees F (260 degrees C) Quantity: 1 bottle
High-strength red threadlocker permanently locks and seals metal nuts and bolts up to 1" in diameter. Resists vibration, moisture, rust, and corrosion. Sets in 10 minutes.Specs Application: Metal threaded fasteners Fastener size: up to 1" diameter Strength: high Cure Time: Set time: 10 minutes Full cure time: 24 hours General: Color: red Container size: 36 mL Removal: heat assembled parts to 500 degrees F (260 degrees C) Quantity: 1 bottle
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. ... Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.Features: Snaps onto the base of your scissor jack for added traction and stability Increases surface area to help prevent sinking into soft ground Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Protects footpad from rocks and roots Won't crack, break, or crumble Molded EPDM rubber is more durable than crumb rubber Has built-in drain holes to release moisture, helping to prevent corrosion Installs permanently - no need to remove and store Just pop the shoe on, use a screwdriver to stretch the rubber over the base, and secure with included ties Made in the USA Specs: Application: 2,500-lb to 9,000-lb scissor jacks with bowtie bases Base dimensions: 8-3/4" long x 4-3/8" wide Adapters included to fit 8" long bases External pad dimensions: 11" long x 6-1/2" wide Quantity: 2 pads 2-Year limited warranty
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 5,000 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale.
Filters
