Standard-duty ratchet straps with rubber-coated-steel S-hooks are perfect for securing your ATV, mower or other equipment in your truck or on your trailer. Flared, lightweight carbon handles let you easily tighten the straps. 1,000 lbs Max load.
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.You can take it with you on every trip and know you're prepared for flats and other repairs. Specs Capacity and Lift: Weight capacity: 6 tons Lift: 8-1/2" to 37-3/4" Dimensions: Base plate: 8" long x 7" wide x 5/16" thick Carry bag: 12-5/8" long x 9-7/16" wide x 10-1/4" tall Warranty: 1-year limited Note: This jack is designed to lift and stabilize 6 tons and should not be used to lift over that weight.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.Features: Proportional braking - Smooth, safe, and good for your brakes long-term 1-Step installation - Plugs into your 7-way and you're done Bluetooth - Control your settings from your smartphone using the OneControl app Great for a fleet - Swaps easily between multiple tow vehicles and trailers Simple troubleshooting - Diagnostic LEDs are displayed on the main unit Safe for your car - Built-in reverse polarity and short circuit protection Weather-resistant - Sealed against moisture Specs: Application: trailers with 1 to 2 axles (4 brake assemblies) Compatible with electric trailer brakes Plug-in unit dimensions: Length: 6-5/8" Vehicle-side width: 1-5/8" Trailer-side width: 2-7/8" Smart device OS requirements: Apple: 5.0 and newer Android: 4.3 and newer Limited lifetime warranty Pair with other OneControl systems for convenient control of your trailer in one app!
This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
Get a smoother towing experience by upgrading to these rubber equalizers that absorb road shock and reduce chucking. Up to 3" of suspension travel helps to compensate for different types of terrain. Fits trailers with double-eye leaf springs.Features: Rubber equalizers replace your trailer's factory steel equalizers to upgrade your setup Delivers a smoother, more comfortable ride Reduces stress on your trailer frame Protects trailer contents from getting damaged while towing Up to 3" of up-and-down travel gives your trailer the ability to compensate for different types of terrain Rubber inserts absorb and dampen road shock and vibration Limit back-and-forth chucking Require less maintenance than suspension upgrades that use air bags Easy, bolt-on installation (mounting hardware sold separately) Made in the USA Specs: Application: tandem-axle trailers with 35" wheelbase and double-eye leaf springs To determine your wheelbase, measure the distance between the center of your front wheel to the center of your rear wheel Bolt hole diameter: 9/16" Dimensions: Distance between outer shackle bolt holes (center on center): 8" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 4" Height from shackle bolt hole to hanger bolt hole: 3-1/2" Axle capacity: up to 8,000 lbs Quantity: 2 equalizers 2-Year warranty (or 45,000 miles) Rubber Equalizers Absorb Road Shock and Reduce Chucking Hauling a trailer that's still equipped with standard steel equalizers is bound to produce a less-than-ideal towing experience.
This kit includes a junction box so you can quickly and easily connect the wires from the included trailer connector to your trailer's wiring.Features: Kit allows you to upgrade from a 4-way, 5-way, or 6-way connector to a 7-way connector Pre-wired, 7-way, blade-style, trailer-end connector lets you connect your trailer to your vehicle Flexible cable allows for easy positioning Weatherproof, heavy-duty plastic junction box protects wires and terminals from the elements Wire functions: Black: 12 volt power Yellow: auxiliary or reverse signal Red: left brake and turn signal Green: running lights Brown: right brake and turn signal Blue: trailer brakes Ring terminals included Specs: Overall box dimensions: 8-1/8" long x 3-3/8" wide x 2-5/16" tall Distance between mounting holes (on center): 7-3/8" Lid dimensions: 6-5/8" long x 3-3/8" wide Cord dimensions (not including junction box): 5'-5" long x 5/8" diameter Overall length including junction box: 6'
Seal O.D. L44643 L44610 L44643 L44610 204507 1.249" 1.983" This replacement bearing and race kit contains all components needed to replace the bearings on one hub of your trailer axle.
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.Specs Compatibility Fits standard 2" hitch receivers Receiver must have a collar around opening to work Fits collars up to 7/8" thick and 3-1/4" wide Material & Finish Steel with a matte black powder coat and e-coat Weight Capacity 5,000 lbs Warranty Limited lifetime Notes: This will not work when using a weight distribution system.
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.Features: Applies towed vehicle's brakes proportionally for smooth braking Measures motorhome's braking and activates car's brakes with same intensity Lets you adjust force and sensitivity for smooth braking Swaps easily between multiple towed vehicles Requires second vehicle kit (BRK2505 - sold separately) for each alternate car Adjusts to fit almost any car Sits evenly on any floorboard with adjustable feet Clamps easily around almost any brake pedal Braces firmly against the seat with seat pad that you can raise or lower Installs simply, with no splicing or hardwiring Plugs directly into 12V outlet in towed car Removes and stores easily Lightweight and compact Convenient handle - carry with one hand Allows you to control and monitor braking with handy LCD screen mounted on RV dashboard Lets you activate towed car's brakes in emergency or to correct sway Alerts you if the towed vehicle becomes detached from your motorhome Warns you if there's too much pressure to activate the brakes properly Plugs into 12V accessory outlet Stops the car if a breakaway occurs, even if your car's battery is dead Able to activate for up to 30 minutes after loss of power Made in the USA Specs: Compatible with hybrids and other cars with continuous-power-assist brakes Overall dimensions: 8" long x 7-1/2" wide x 11-1/2" tall Weight: 6 lbs 2-Year warranty Do I Need a Braking System for Flat Towing? A braking system is a must when towing a vehicle behind your motorhome.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 8" to 14" Bolt pattern: 4 on 4" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.Features: Marine-grade trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 8" to 14" Bolt pattern: 4 on 4" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is made for use on trailer idler axles. Fits 2K E-Z Lube and Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. Fits 13" to 15" wheels.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.
Hub is designed for use on trailer idler axles. Fits 2,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.Features: Marine-grade trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 8" to 14" Bolt pattern: 4 on 4" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Kit Includes: One Inner Bearing and Race One Outer Bearing and Race Grease Seal Cotter Pin Grease Cap Outer Bearing Race Inner Bearing Race Seal Seal I.D. Outer Hub I.D. L44643 L44610 L44643 L44610 34823 (12192VB) 1.249" 1.980"
Filters
