Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey David, all you need to convert your drum brakes to disc is that kit, the Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers #HYD34VR you were looking at. This kit includes the new actuator, brake lines, fittings, and the new rotors /…
view full answer...Hey Mark. The Torflex Lift Kit #DX56CR is specifically for Dexter #11 Torflex axles and would not be compatible with your Lippert Axle. I'm pretty sure at this point Lippert dropped all of their lift kits for torsion axles but if you can send me…
view full answer...The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…
view full answer...Yes, you can add a lockout to the 8K Demco Hydraulic Brake Actuator #DM8759138, you just need the Manual Reverse Lockout Kit #DM5939 and you're good to go!
view full answer...Hey Jacob, the pigtail harness part #100575-12-MBS that you referenced would work great for each of your propane tanks to attach to the JR Products Auto Changeover Regulator #37207-31525.
view full answer...The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…
view full answer...To determine the lift kit that will work for your torsion axles, you need to measure from center to center on the attachment bolts. If the distance between the bolt hole centers is 7-3/4 inches, then you will use #K71-723-01. If the distance between…
view full answer...I went out to our warehouse to get the following dimensions for the Dexter Torflex #11 Axle Side-Mount Frame Installation Hardware Kit #DX57FR as we do not have a dimensional drawing from Dexter. The overall length is 11-7/16", height of side…
view full answer...I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.
view full answer...The thickness of the angle steel of The Dexter Axle Torflex #11 Axle Side-Mount Frame Installation Hardware Kit Item #DX57FR is .209” (+/-.09).
view full answer...We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…
view full answer...You'd have to measure the height of the brackets that your current axles are attached. The Torflex Lift Kit #K71-725-02 can't attach to brackets that are taller than 3 inches.
view full answer...Filters
3479 results
Vehicle Fit
Fit 2005 Volkswagen New Beetle