Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Steven, thanks for getting in touch. I can provide dimensions for the Demco Cast Head Coupler #DM37ZR but I am sorry to say that we do not have a CAD drawing we can send. If there is a specific dimension you need or question you have I am happy…
view full answer...There are a few different ways to make sure that you are getting the correct hub to match your spindle like the wheel bolt pattern, bearings, and weight capacity. You can either use a Digital Caliper #PTW80157 to measure the different sections of…
view full answer...The hub you referenced is not galvanized and we do not have any similar ones that are since that bolt pattern is a little unique.
view full answer...The difference between the two is the bolt hole distance relative to the top of the coupler. The part #F223000301 is 1 inch from the top of the coupler to the ball hole whereas the part #F233000301 has a distance of 3/4 inch like what you are in need…
view full answer...Hey Sam, so from previous customers we have determined that the Sure Trac axles use the standard trailer axle components so yes the brake assemblies part #AKEBRK-35-SA and the hub part #AKHD-545-35-K would fit and work great.
view full answer...While grade 8 bolts like you have are recommended to install a class 3 trailer hitch, I do not recommend using the bolts in your picture. For a trailer hitch like the Curt #14001 you were looking at, it uses 1/2" x 13 grade 8 bolts. Hitch…
view full answer...The standard angle for an A-frame trailer tongue is 50 degrees. More than likely your trailer follows the standard. Since you are unsure, you could measure it using a tool like a protractor. The Demco Cast Head Coupler #DM37ZR you looked at fits the…
view full answer...The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…
view full answer...You are correct. Other than how they are made, the Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K #DM37ZR and the #DM14793-81 have the same ratings and will work the same. There is no pro or con to either, so…
view full answer...Yes, if you wanted to weld on the Demco coupler part #DM37ZR instead of bolting it on you certainly could. This is powdercoated though so you will need to remove the powdercoating first. For a similar coupler that was designed to be welded on and…
view full answer...If you look at the diagram that I received from my contact at Demco, you can see several of the dimensions of the #DM14793-81 trailer coupler. If there were other dimensions you were needing, please let me know.
view full answer...Installing the #F2703 on your 2012 F-250 will require moving the block in your picture. However, I'm not sure if it can be moved to the top of the jounce stop since we don't have any information on it and neither did Firestone. I recommend…
view full answer...Filters
- 3600 results