Dimensions of Demco # DM14793-81 Trailer Coupler  

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

From the rear of the coupler portion on the Demco A-Frame Coupler #DM14793-81 to the center of the center bolt hole there is a distance of 4-1/2 inches. From the rear of the A-Frame mount to the center of the center hole there is a distance of 4-3/4…

You are correct. Other than how they are made, the Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K #DM37ZR and the #DM14793-81 have the same ratings and will work the same. There is no pro or con to either, so…

Based on the picture you provided I believe you have the SAE solar plug port on your Braxton Creek Bushwhacker Plus 17BH so you should have no issues plugging your Go Power DuraLite Portable Solar Panel with Digital Solar Controller #GP66FR in using…

Nearly all A-frame trailer have a 50 degree angle frame, the Demco A-Frame Trailer Coupler #DM14793-81 that you referenced has a 50 degree angle too.

Hardware is not included with Demco coupler #DM14793-81. The reason for this is different applications can require different hardware whether it be length or material (because dissimilar metals can lead to corrosion problems).

Starting with the safety chains they really need to be attached to the trailer frame and not the coupler hardware. If there is no where to attach the chains on the trailer you can weld on safety chain mounting brackets such as #MB12, #MB38, or #MB58.…

The mounting holes on the Demco A-Frame Trailer Coupler #DM14793-81 are all going to be 1/2", so you will want to use grade 5 or higher 1/2" bolts. The length will depend on the thickness of the frame you are attaching this to and the…

We have a large selection of A-Frame couplers like what would be on your older Winnebago travel trailer. You can certainly remove your weld-on coupler and replace it with a bolt-on unit, as long as the new coupler's capacity is correct for your…

That is an interesting question. We do caution against bolting the Demco Coupler #DM14793-81 to a round tube. While you might be able to drill holes and tighten the bolts properly, the concern would be that the body of the coupler is not making full…

There is! To replace the standard pin and clip on the Curt QuickPin No Latch A-Frame Trailer Coupler #C84DR Curt actually recommend the Hitch Lock #C23025 which is what I recommend going with!

I went out to the warehouse to measure the Demco A-Frame Trailer Coupler #DM14793-81 that you asked about and found that it measures 3-1/2" from the bottom to the top. I have attached a picture to demonstrate. If your safety chains are welded to…