Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal #TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing -…
view full answer...I checked with Bulldog and here is why they include the extra gears with the #BD1824200100: If your date code is before E06 (May 2006), then you will also need to change out the bevel gear (included) to accommodate the larger dowel pin (included).…
view full answer...I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.
view full answer...The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.
view full answer...I spoke to my contact at Bulldog who said that the Model 12, 180 Series Bulldog jack that you have is the older version of the the current 10K jacks like part #BD182500. Since you have the older version without the spring that you mentioned seeing in…
view full answer...Bulldog Powered-Drive Kit #BD1824200100 comes with the parts needed to install and use the kit with your Fulton Magnum 12K jack as long as it was made after 2003. If it was made in 2003 or earlier then there isn't a kit for it.
view full answer...The closest grease seal we have available to the measurements you provided is the TruRyde Double Lip Grease Seal #RG06-010. This seal has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. You can use a digital caliper like…
view full answer...If you already have brake drums you will not have to replace them unless they are damaged or became overheated and have discoloration on the inside armature surface where the magnet rides, grooves in the armature surface, or severe wear where the…
view full answer...We don't have the Torflex style of axles at this time but we do have the somewhat similar Timbren Axle Less kits like the part #ASR5200S01 which is a similar style of axle and has a 5,200 lb capacity. This style of axle attaches to the frame of…
view full answer...I reached out to Lippert about the Lippert Electric Steps 5041647 on your Tiffin Motorhome and was able to confirm that the correct replacement gear for this is the Replacement Winnebago 5:1 Gearbox With High Torque Motor for RV Steps part #LC22UD…
view full answer...I believe we do. Based off of some of the part numbers you gave me I am pretty sure you need the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 27 Series - 29" Wide item #LC375632. These have an overall width of…
view full answer...You are correct since your steps are 29" wide, the only one it could be is the Kwikee RV Electric Steps - 27 Series - item #LC375632. We have a couple of replacement parts but there is no replacement motor. Since you are dealing with so many…
view full answer...