Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…
view full answer...The Spring-Eye Bolt with Locknut for Slipper Springs #166079 is a total of 3-1/2" long. The measurement from the back of the head to the start of the threads is 2-3/4" and the length of the threads are 3/4".
view full answer...Hey Dennis, thanks for reaching out! The 4-Leaf Double-Eye Spring #DX23CR has a 3" drop from center eye to middle of the leaf spring (see attached photo). For a single axle setup I recommend the Hanger Kit #APS4, and for a tandem axle setup I…
view full answer...Your 2013 Nissan Titan came from the factory with a quick-connect port under the dash for connection of a brake controller like the Hopkins Agility #HM47294. That quick-connect 4-wire harness for a Hopkins controller is part #HM47635. As long as the…
view full answer...I have a possible solution for you, but unfortunately the E-Z Flex Heavy Duty Rubber Suspension System such as the 5-5/8" Equalizers #K71-652-00, will not work with the Wide Trax suspension on your trailer. The axles on a Wide Trax system are…
view full answer...Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
view full answer...To find the correct E-Z Flex Equalizer, you will need to take off your current ones and measure the distance from the center of the one end hole to the center of the other. You will also need to ensure that your leaf springs are 1-3/4" wide.…
view full answer...Thank you for the photo and dimensions of your 368 equalizer! You can upgrade your leaf springs from 4K to 6K but just keep in mind that it will make the ride quality of your trailer a bit more stiff and the springs need to have the same length as…
view full answer...Yes, you can replace your Dexter 13-104 equalizers - which are the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long #TREQ104 - with the Road Armor Shock Absorbing Equalizer Kit #LC696740. The Road Armor #LC696740 have a…
view full answer...The TDE 46245 you have is a Hub and Rotor for a 3500lb axle and uses inner bearing #L68149 and outer bearing #L44649 and uses the 5 on 4-1/2" bolt pattern For a replacement idler hub you can use the Trailer Idler Hub Assembly for 3,500-lb E-Z…
view full answer...I believe you meant a TDE 46245, is that correct? If that's the case, you've got a 3500 lb axle which uses a 10 inch hub/rotor with a 5 on 4-1/2 wheel bolt pattern. You'll want to use the Kodiak #KHR10D hub/rotor as a replacement. The hub…
view full answer...Hello Mark, thanks for reaching out. When replacing leaf springs, it is important the new springs are identical in length to the old ones. There is a small amount of tolerance, like 1/2" or less, but any more than this can throw the suspension…
view full answer...