Valterra Bladex RV Waste Valve Seals - 1-1/2" - Qty 2

See what our Experts say about this Valterra Accessories and Parts

• Bolt Diameter That Comes with Valterra Bladex RV Waste Valve Seals
  I went out into our warehouse and grabbed a set of the # T1001-9VP and found that the bolt diameters are 3/16 inch exactly.
  view full answer...
• New Dump Valve Seals Look Good And Went In Easy But Now Can't Pull The Dump Handle
  The Valterra Bladex RV Waste Valve Seals - 1-1/2" - Qty 2, # T1001-9VP, may have just been tightened too much. I suggest giving them a little more room to work by loosening those bolts a little. It sounds like they are overly compressed.
  view full answer...
• Visual Difference Between Old and New Style of Valterra 1-1/2 inch Valve Seal
  Go ahead and send me the pictures and I'll take a look to see which 1-1/2 inch Valterra seal you would need. The biggest visual difference is that the new Bladex Style part # T1001-9VP has a small lip on one corner of it that's used for grabbing. In the attached picture it is pointed out. The older style # T1001-7VP does not have that and has a thicker center section. I attached a picture of the two seals for you to check out as well.
  view full answer...
  
• Picking Out Replacement Seals for Valterra 1-1/2 inch Diameter Waste Valve
  The correct Valterra RV waste valve seals for 1-1/2 inch diameter valves is part # T1001-7VP for standard valve like part # T1001A or the part # T1001-9VP for if you have the Bladex style like # T1001VP.
  view full answer...
• What is the Difference Between 1-1/2" Waste Valve Seals # T1001-9VP and # T1001-7VP
  The part # T1001-9VP is specifically designed for the Valterra Bladex Waste Valves like part # T1001VPM. If you have a typical 1-1/2" waste valve then you want to go with part # T1001-7VP instead.
  view full answer...
• Repairing Leaky Valterra TC1372 Waste Valve Bodies on RV Black and Gray Water Sewer Outlet
  According to Valterrra, if your # TC1372 waste valves are fully closing, but are still leaking you'll want to replace the seals. You'll need both the 3 inch seal kit, part # T1003-9VP and the 1-1/2 inch seal kit, part # T1001-9VP
  view full answer...
• Replacement Seals for Valterra 1-1/2 Diameter Waste Valve
  The replacement seals for the Kit # TC172 can be found on our site as part # T1001-9VP. This comes both with 2 seals and with some replacement hardware. The seals should do the trick, but if you're still experiencing a drop somewhere I'd do some double checking to make sure that you have everything installed properly and that any sealant you've used elsewhere is holding up.
  view full answer...
• Replacement Grey Water Body/Seals for Bristol Double RV Waste Valves 34466ND13AAR
  The gray water tank valve on the Bristol Double RV Waste Valves part # 34466ND13AAR can be replaced using the Bristol Waste Valve Body for RV Gray Water part # 34439241 or the Valterra Bladex Waste Valve Body for RV Gray Water Tank part # T1001VP. If you just want the seals then that would be the Valterra Bladex RV Waste Valve Seals part # T1001-9VP.
  view full answer...
• Replacement Seals for Waste Valves Which are Difficult Operate
  Often times when a Waste Valve # T1003PBC becomes difficult to operate the seals need to be cleaned and lubed. We also have Replacement Seals for 1-1/2" # T1001-9VP, 2" # T1002-7VP and 3" # T1003-9VP valves if they are damaged. New hardware is included with these seals as it typically corrodes.
  view full answer...

Do you have a question about this Accessories and Part?