What to Know About the Lippert Manual Pull-Out Step for RVs Video

Hey Terry, so we have RV steps that could possibly fit your 2020 Nissan NV 2500 like you are wanting but we don't have anything that is custom fit for your vehicle. That said, I am not totally sure what steps you are looking at but we do have the…

The Flexco Manual Pull-Out Step for RVs #SMFP-1220 measures 21" wide, I double checked with the manufacturer on this as well. The distance between the center of the mounting holes is 22 1/2" , and since bolts aren't included you can use…

We do have some bolt-on manual steps that you can install on your 2018 Forest River Forester Motorhome to make it a little easier entering and exiting your motorhome. Out of the linked selection I recommend going with the Flexco Manual Pull-Out Step…

To install the Lippert Manual Pull-Out Step for RVs, #LC432678 on a trailer that does already have a mounting point, this will need to be custom fitted. I would suggest you use a metal backing plate and bolt through the floor and plate to the steps…

There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…

I spoke with Lippert about the Lippert Components Kwikee Step Frame 28 Series Step part #LC3747457 and unfortunately, they do not provide any mounting information as this is done through the trailer manufacturer. They did however state that you…

Yes, we do have towing mirrors for your 2022 Chevrolet Tahoe. I recommend the CIPA Universal Towing Mirrors - Clamp On - Qty 2 item #CM11980-2. These towing mirrors provide a 7-1/2" wide x 4-5/8" tall mirror that can be rotated 360 degrees…

For your generator exhaust, the Camco Gen-Turi Replacement 30" EMT 90-Degree Discharge Pipe #CAM44812 is designed to be used with the Camco Gen-Turi RV Generator Exhaust System #CAM44461. With that being said, we have not tested the #CAM44812…

Hey Linc, you'll have to measure your current steps but as long as the width of the mounting bracket is 25-3/4 inches the part #LC432678 will fit and work great.

Hey Dennis, If you aren't looking to use your camper's electric brakes and just want the standard lighting functions from the 4-way, all you'll need is an adapter: - Adapter 4 Way to 7-Blade RV Connector #C96KR You'll just plug your…

The Lippert #LC432678 you were looking at do have a bracket height of 6-3/4" tall, so they're going to be a little shorter than your existing steps were, but there is still going to be something hanging down there. It actually sounds like…

For your GC2 Deep Cycle Extreme GC2-ECL-UTL battery, I recommend the Snap-Top Battery Box with Strap for 6V Batteries - Vented, part #329-HM306BKS. It is compatible with battery sizes ranging from 8-5/8" long x 9-5/8" tall x 5-5/8"…