1. RV Vents and Fans
  2. Valterra
  3. A/C and Heat Registers
  4. Ceiling Register
  5. Brown
  6. 4 Inch Diameter
Valterra Heating and A/C Vent Register - Round - Brown

Valterra Heating and A/C Vent Register - Round - Brown

Item # A10-3352VP
lowest price pledge
Our Price: $13.24
You Save: 39%
RV Vents and Fans
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.49 lbs
In Stock
RV Vents and Fans A10-3352VP - 4 Inch Diameter - Valterra
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Lowest Prices for the best rv vents and fans from Valterra. Valterra Heating and A/C Vent Register - Round - Brown part number A10-3352VP can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (8)
  • Q & A (1)
  • Videos (2)
  • Photos
  • Why etrailer?

Valterra RV Vents and Fans - A10-3352VP

  • A/C and Heat Registers
  • Ceiling Register
  • Valterra
  • Brown
  • 4 Inch Diameter

  • Valterra heating and A/C round vent register
  • Easy to replace
  • Two piece construction allows for easy removal and cleaning
  • Fits 4" vent hole
  • Louvered flange measures 5-3/8"
  • Installation tape and hardware included
  • Color: brown
  • 1-Year warranty

A10-3352VP Valterra Heating and A/C Vent Register - Round - Brown

Video of Valterra Heating and A/C Vent Register - Round - Brown

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Valterra Round Heating and A/C Vent Register Review and Installation

Hey guys, it's Randy here at etrailer.com. Today, we're going to be taking a look at replacement heat and AC register or vent cover. This one's from Valterra, fits a four inch pipe. This is going to be almost like a direct replacement for most factory stuff. Got our brown here. We've got a tan, a white and a black.

I think they are going to do a good job. If you like the ability to just move these and close that off or just close off half of it, I think they'd be a good choice for you. They're going to do a good job. They're going to serve the purpose, but I like the ones where you can just rotate that front end. If this is the type you're looking for and if this is what you want, it's going to fit the bill for you very nicely.Basically, the only variations I've seen with these are where the screws are placed as they go in.

This one is dampenable, so we can shut the air flew off of coming through, coming out. I like the idea of that a lot, as compared to one that doesn't have that option because this allows us to really fine tune where our heat or where our air is going to be going, as compared to one that just lets the air free flow and only allows us to point it in the direction that we want.Now to do that, we move these arms. You can see when it's fully open, they sit down pretty flush and when we close it, they stick out like that. It gives us a good visual indication of whether that vent is open or closed, but something I don't necessarily like about that is that they stick out. They're going to come out from our vent surface about an inch, inch and a quarter there and I think we would run the risk, since a lot of these events are closer down to the floor, of maybe hitting those with our feet and breaking them.There are other options available where you would just rotate the cover and by rotating that cover you open and close those.

I think that's a better choice. I think I would go that way rather than this way simply because we won't run the risk of damaging it just by walking by.For the replacement process, of course we need to get our old vent removed, and see this is the type that spins all the way around the outside there. It has a center push pin. They can be varying in type, but most of the time you're just going to have a cover on the outside that protects and covers those screws, makes it look nice. In this one, we want to pull out on both sides here.

I'm just going to gently wiggle it side to side. You see that center section is going to come out and there we've got our four screws.A lot of times these are going to have a square bit. You can see there's a square on the inside, but a Phillips will also work for it. Let's just get this taken out, wood screws there, not much to it. We'll hang onto those. The cover's not going to come with the new ones. I'm just going to pull that out. See, there's our ducting material, just like a dryer hose really. There's a little staple in this one right here. We want to pop that out. Get that one out of the way. We can get our new one and slide it on.Now, we'll take our new vent there, need to get this slid in. I like to compress it on there, as much as I can, just so I know it's going to hold really well. Line up our holes there for our screws. Get that placed back in and just replace our hardware. Now, it will come with new hardware. If you're doing this, like a new installation situation, you can use that. Since we're doing it in an already existing place, we'll just use what came with it. With those installed, just take our covering, you can see the tabs. We going to have three of them around the outside. Let's get that put on, pushed into place. That's going to complete our look at the Valterra heat and AC register vents with dampeners.

Customer Reviews

Valterra Heating and A/C Vent Register - Round - Brown - A10-3352VP

Average Customer Rating:  4.4 out of 5 stars   (8 Customer Reviews)

- A10-3352VP

good enough for my need . 757049

- A10-3352VP

We were looking for a replacement vent for our dog kennel/house. the manufacturers of the house sell no replacement parts. the function and dimensions are perfect. thanks for the great customer service. 707446

- A10-3352VP

It was exactly what I was looking for, thank you 600453

- A10-3352VP

Exactly what I needed, Thanks! Fast, Easy service! 463959

- A10-3352VP

Seems to be constructed well. 431178

- A10-3352VP

Sturdy plastic, easy to install, adjustable vents. Just want I wanted. 399327

- A10-3352VP

Seemed ok not very durable for close to a gas furnace 323120

- A10-3352VP

I haven't had chance to install yet but I believe it will work as intended. Customer support was excellent. I was contacted to tell me that the color I ordered was back ordered and given an option to wait for the ordered color or have another color shipped immediately. I elected to get another color that will work just as well. I appreciated the information and options. 320343


Ask the Experts about this Valterra RV Vents and Fans

  • Wall Vent That Closes for my 2016 Wildwood Toyhauler
    The Valterra Heating and A/C Vent Register part # A10-3352VP is a dampered vent by moving the arms on it to the center you can shut off the airflow and do exactly what you want. Get the air to the right place when you need it! This one is designed to fit a 4" vent tube and the outer flange is 5 3/8". They are very easy to swap and I included a video below I did on changing them out.
    view full answer...

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Cole B
Installed by:
Randy B
Written by:
Amy B
Video Edited:
Chris R
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.