Result: fender light bracket

Installing a brake controller in your 2014 Chevy Silverado 3500 that has an integrated brake controller isn't hard at all. If you check out the help article I attached it will walk you through everything you would need to do. The Tekonsha Prodigy…

While we do not have an installation video I have linked a great help article we have for this near the bottom of the page. The article includes pictures of the wiring and goes into further detail about the installation on your 2014 Chevrolet…

We spoke with our contact at UFP Dexter and he said that your 41062 hub uses inner bearing 031-030-02, outer bearing 031-032-02, and seal 010-181-00. This is the equivalent of inner bearing #25580, outer bearing #LM67048, and grease seal #GS-2125DL…

I spoke with my contact at UFP Dexter and he said that your 41062 hub uses inner bearing 031-030-02, outer bearing 031-032-02, and seal 010-181-00. This is the equivalent of inner bearing #25580, outer bearing #LM67048, and grease seal #GS-2125DL…

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

The issue is that the Roadmaster converter #RM-732 is designed for going the opposite direction that you are wanting. This is designed to take a separate system and combine the circuits and you are wanting to take a combined circuit and separate out…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

The available trailer hitches for the 2016 Ford Transit T350 are not designed to fit the cab and chassis/cut away models but we do have options that you could use. The most popular option is #13703. It can actually be bolted on or welded on. Welding…

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

We have the hub you are in need of as part #AKHD-865-8-K and then for the brake assemblies you'd need #AKEBRK-8R for the right hand side and part #AKEBRK-8L for the left hand side. Our etrailer.com brand axle components are actually rebranded…

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

What you see in the attached picture is what you'd get if you ordered the Pre-Drilled Rubber Bumper part #D4-96 that you referenced. It has an odd shape that doesn't completely match the description of round or square, but the picture shows…