Search: e28sr   >  

Hey John, To determine the correct replacement leaf springs for your trailer you'll want to jack up one side to take the pressure off the leaf springs and then can measure from the center of one eyelet to the center of the other eyelet. From…

If the shackles are flipping the wrong direction frequently that typically means the leaf springs are too short, the hanger spacing is too big, or the shackles are too short. Most of the time it's somebody changed leaf springs and just went with…

I attached a picture that shows the proper position of shackles and equalizers on trailer suspension. Sometimes the shackle will flip up but if you jack up the trailer by the axle that's got the shackle flipped you can usually get it to flip back…

You would want the shackle straps of your trailer suspension to be both pointing the same direction. The would need to be pointed up on the straight equalizer part #TREQR83. I attached a picture that shows how the straps should orientate with the…

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…

Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item #LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure…

To pick out the correct suspension components for a trailer you want to do it by most importantly picking out the springs that closely match the capacity of the axle capacity needed. That is priority one. For example if you were using the springs…

For a replacement you need the Titan Zinc-Plated Brake Actuator #T2477600. This is the Titan Model 10 which is the same as the Dexter DX12.5 you currently have on your boat trailer.

Hi there Matthew; appreciate that info and we do have the exact bearing kit you are looking for, with bearings BK2-100 and the 10-19 seal. What you need is the following: - Hub Bearing Kit #BK2-100

We do have a more robust option to replace your 072-078-00 double-eye springs, which are for 4,400 lb axles and have a 2,200 lb capacity, like you mentioned. So for a higher capacity option, I do not recommend going any higher than a 5,000 lb spring.…

Since leaf springs flatten out as they wear, the best way to determine their actual center eye to center eye length is to put the trailer up on jack stands so the axle(s) hang freely, then measure them. This being said, there's every chance that…

With your axle leaf springs measuring out to 25-1/4 inches long I recommend the 4-Leaf Double-Eye Spring #e28SR for your 3,500 pound axle. This spring has a 5,000 pound weight capacity so it will be a little stiffer for you. The spring has a sturdy…