Video Transcript for A Closer Look at the Oklahoma Chrome Logo State Emblem 2" Hitch Cover

Today we're going to be taking a look at the Oklahoma University 2 inch hitch cover from AMG. The hitch cover's going to allow you to show your school pride. It's going to add a clean finished look to your hitch, and it's going to help keep dirt and grime out of the receiver tube of your hitch. The hitch cover's made from a steel construction. It's going to feature a really nice black, powder coated finish, which is going to do a great job at resisting rust and corrosion. Here at the front, we're going to have a nice colored emblem. It has chrome plating around it.

It's going to add a lot of style, and that's going to have a nice protective coating over it. It does feature a rust proof and fade proof design. This product is made right here in the U.S.A. Here at the back, it's going to have a foam gasket. That's really going to help reduce rattle between the hitch and the hitch cover.

That just simply slides over that piece that goes into the receiver tube of the hitch. This is an officially licensed product. Now when installing this it is going to require hitch pin and clip or a hitch lock for complete install. Those items are sold separately, so if you're in need of one, you can find them right here at etrailer.com. The pin holes on the hitch cover will accept a standard 5/8 diameter pin. A few measurements to go over with you real quick, the overall width is going to be about 5 inches.

Overall height is going to be about 3 1/2 inches. The distance that we have from the back of the foam bad to the center of the hitch pin hole is going to be about 2 1/2 inches. This is designed for a 2 inch by 2 inch hitch, very simple installation. You just slide this into the receiver tube of your hitch, line up the pin holes, and secure it by installing the hitch pin and clip or hitch lock. That's going to do it for today's look at the Oklahoma University 2 inch hitch cover from AMG..