Replacement Leaf Spring for Trailer with Dexter 4,400 lb Axle

Updated 03/28/2022 | Published 03/27/2022

Question:

I have a 2019 Imagine 3170bh with Dexter 120092 4400 lb axles. I replaced the leaf spring last November due to flat springs on the passenger side. I just got back from a trip and the rear passenger leaf spring is flat again causing the camper to lean. 1. Do you have record of which spring I bought last year? 2. Thoughts why my springs keep going flat on one side?

asked by: Brandon S

Expert Reply:

I checked your order notes and the leaf springs you bought last year were the part # e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under that figure. Were you on off-road terrain? It's also possible the failure was a fluke or you are overloading the capacity of your trailer.

expert reply by: Jameson C