Search: cable   >  

Hi David; more often than not it is related to the cost, so in this case what Dexter is charging as the manufacturer. This isn't the first time the complete part is cheaper than a replacement so I recommend doing what you said and buying the…

What you need is a split reel winch like the part #DL10952. This winch will allow you to run a cable in either direction of the spool and will reel both in at the same time. This winch has a capacity of 1,500 lbs which would work well for you even…

Hey Rick, thanks for reaching out! I'm guessing the 90" dimension is the width of your trailer door so for your application I recommend the Conventional Ramp Door Spring #M394FR because it has a 185 lb weight rating. This means that…

For your Jet Ski Lift, I recommend the Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 1,500 lbs #DL14927 or the 2,500 lbs #DL14958. These winches are designed for use on boat lifts and have the covered gears for safety. They both…

Towing capacities sometimes can be hard to figure out and it can seem like there is conflicting info but on your 2020 Ram 2500 the towing capacity is spelled out pretty easily as it can tow up to 25,000 lbs of trailer weight with a pin weight…

Hey Bill, so if it was me I would go with the Dutton Lainson winch part #DL17085 over the Fulton. I really like DL winches because they are well made, very reliable, and made in the USA. Fulton winches aren't terrible but DL winches win if for…

This would all depend on where the bend is located. If the torsion bar that connects the frame brackets together is bent, then you would need to buy a new axle. However, if the spindle on the torsion axle is bent, you can replace it. To prevent other…

I have attached the review video of the Dutton-Lainson Hand Winch part #DL10950 to this answer page for you. The video can be found in the middle of the page under the "Featured Help Information" heading. As mentioned, the above worm gear…

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

Yes, the Fulton High-Performance Brake Winch part #F143100 will work with the Universal Hand Winch Right Angle Mounting Bracket part #DL24110. I went out to our warehouse and test fit the two products together to confirm this for you. I have attached…

The hitch pin weight of 1400 lbs you stated is so close to your payload capacity, but that is not accounting for the 5th wheel hitch and rail weights or the loaded weight with cargo added. Tunda's are notorious for having a lower payload and in…

We have an 8 foot ramp door spring that has dual torsion springs like you asked about with the part #M394FR. This is the hand wound torsion style spring you mentioned.