We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C94WR

1026 Reviews | 184 Questions

In Stock

$249.20

Retail:$398.95

You Save: $149.75

Not Confirmed to Fit

2020 Keystone Outback Travel Trailer

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch for towing receiver - custom fit class iii 2 inch

curt trailer hitch for towing class iii receiver - custom fit 2 inch

Show All (11) Product Images

Show Fewer Product Images

In Use/Installed

2022 hyundai tucson trailer hitch curt for towing class iii receiver - custom fit 2 inch

2022 hyundai tucson trailer hitch curt for towing on a vehicle

2022 hyundai tucson trailer hitch curt class iii c94wr

2022 hyundai tucson trailer hitch curt for towing receiver - custom fit class iii 2 inch

2022 hyundai tucson trailer hitch curt class iii on a vehicle

2022 hyundai tucson trailer hitch curt c94wr

2022 hyundai tucson trailer hitch curt for towing class iii on a vehicle

Show All (9) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (137) Customer Images

Show Fewer Customer Images

Videos

Mount: Curt Trailer Hitch Receiver on a 2022 Hyundai Tucson

Installing the Curt Trailer Hitch Receiver on your 2023 Hyundai Tucson

Install: Curt Trailer Hitch Receiver on a 2023 Kia Sportage

Installation: Curt Trailer Hitch Receiver on a 2024 Hyundai Tucson

Installation Guide for the Curt Trailer Hitch Receiver on a 2024 Kia Sportage

Installing the Curt Trailer Hitch Receiver on a 2025 Kia Sportage

Show All (8) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C94WR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (1026)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - C94WR

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Holds up to 525 lbs (TW): Supports bike racks, cargo carriers, and Class III accessories.
Tows up to 3,500 lbs (GTW): Handles small trailers, boats, or campers with stability.
Bolt-On Installation: Mounts directly to the frame using included hardware—no welding required.
Concealed Cross Tube: Keeps the hitch hidden for a clean, factory-style look.
Gloss Black Powder Coat: Dual-layer finish resists rust and corrosion for long-term durability.

Features to know about

Get More Out of Every Trip: Class III Strength with 3,500 lbs Capacity

This hitch gives you the solid utility you need for daily use or weekend adventures. With a 3,500-lb maximum gross trailer weight and 525-lb tongue weight rating, it’s made to handle small trailers, campers, boats, or loaded cargo carriers. The 2" x 2" receiver works with the most common towing and accessory setups so you can swap between racks or mounts without adapters.

Built to Last: Powder-Coated, Fully Welded Steel Construction

The hitch is fully welded for maximum strength and a precise fit. The gloss black powder coat finish is applied over a protective base coat to resist rust and corrosion. It’s co-cured inside and out for added longevity, so even road grime and moisture won’t wear it down quickly. That tough coating also keeps the hitch looking clean after years of use.

Clean Look Under the Bumper: Concealed Main Body Design

The concealed cross tube keeps the receiver tucked up under the bumper for a factory-style appearance. Only the square receiver is visible, giving your setup a tidy, low-profile look instead of hanging hardware underneath. It’s a great option for anyone who wants strength without sacrificing style.

Straightforward Installation: Bolt-On, No Welding Required

You can mount this hitch using the included hardware—no drilling or welding needed. The vehicle-specific design lines up with factory holes, making alignment easier and ensuring a snug, proper fit. It’s ready to take on bike racks or towing duty once bolted in place.

Specs

Receiver Opening

Size: 2" x 2"

Class Rating

Rating: Class III

Weight Capacities

Maximum gross trailer weight: 3,500 lbs
Maximum tongue weight: 525 lbs

Compatibility

Not rated for use with weight distribution systems

Warranty

Limited lifetime warranty

13485 Curt Class 3 Trailer Hitch Receiver

Installation Details C94WR Installation instructions

This Product Fits The Following Vehicles

2023 - 2028 Kia Sportage
2022 - 2026 Hyundai Tucson
2022 - 2026 Hyundai Tucson PHEV

Customer Satisfaction Score:

98% were satisfied with this product

2% of customers were not satisfied

Arrived Damaged
Product did not meet expectations
Wrong item was ordered

2% of customers were not satisfied

Arrived Damaged
Product did not meet expectations
Wrong item was ordered

4.7

1026 reviews

5 Stars		(875)
4 Stars		(74)
3 Stars		(32)
2 Stars		(18)
1 Star		(27)

by: Scott.L 01/22/2025 One Year Later

2023 Kia Sportage

1 year later completely satisfied with the Curt hitch. It appears to be of high quality and well painted. The only ding is the hitch arrived sticking out of the shipping box in several places as other reviewers have mentioned. Fortunately there was no damage but was surprised it wasn't packaged better.

Installation was not that hard. Was a bit tough lining up 2 of the horizontal frame bolts but a floor jack under the hitch applying pressure solved that.

Highly recommend modifying and not discarding the splash gaurd that has to be removed. The gaurd is there for a reason as it protects proximity and other sensors behind the bumper from road salt / water. Modified mine with a grinder cutting around the 3 front clips so it could slide under the hitch. Was able to then reinstall it after the hitch was installed as you can reach under the hitch to push up the gaurd's front clips.

Click to Enlarge

Brooke M.

1/29/2025

Thanks for awesome review, Scott! I think a lot of folks who see this are going to appreciate your advice about the splash guard and the reliability of the hitch, too! What all do you use the hitch for - towing, or carrying anything cool?

Scott.l One Year Later

2/4/2026

Hitch is still in great shape after a year. No problems to report

by: Dennis 09/09/2026

2026 Hyundai Tucson

Simple design, precise fit for my 2026 Hyundai Tucson, and it was easy to install.

Click to Enlarge

Lazer S.

9/11/2026

Glad to hear it wasn't too bad to install, Dennis! What will you be using it for now that it's installed?

Dennis

9/16/2026

@LazerS Thanks, Lazer! It was a straightforward install, and the youtube video was especially helpful. We're getting it set up to carry our bikes on road trips up and down the east coast.

Lazer S.

9/16/2026

@Dennis Glad we could help! Have fun out there and just let us know if there is anything we can help with down the road! ^___^

by: TomR 03/13/2026 One Year Later

Product has been installed for 1 year now - 2025 Kia Sportage. There was some alignment finesse required to get the last bolt started but otherwise a good fit and position relative to the bumper for a bike carrier. That is the only usage so far. Picture shows after partial winter in OH, so some road salt exposure but most of this winter was in FL. Would definitely recommend this product from my experience.

Click to Enlarge

Kate F.

3/18/2026

Glad to hear things are holding up as they should after a year Tom! Do you have a specific trail you like to take you bikes to? We have the Katy Trail here in Missouri, and it is jam packed with riders when the weather is nice.

Tomr

3/18/2026

@KateF We used the hitch to move the bikes to our new home in the Toledo area. We will probably be visiting a local metro park and the converted rail lines once the weather warms a bit. I have a nice new Trek hybrid in the garage ready to go.

Kate F.

3/18/2026

@Tomr Very nice Tom! I hope you are getting settled in to your new home nicely. I was just talking to our biking group here at work yesterday about what kind of bike I should get, Trek was the number one suggested, must be a great brand! Thanks for the response. - Happy Riding =)

by: Jeff 06/15/2026

Bolted right up to our 2023 Hyundai Tucson perfectly with no problems. Has a nice clean look. Only took about a 1/2 hour to install and that was not on a car lift.

Click to Enlarge

Mike L.

6/17/2026

Thanks for the photos, Jeff. You did a great job!

by: Peterk 12/18/2024

Ford Transit Connect

Easy installation after reviewing video on installing the hitch. Package was damaged in transit but no injury to product. Four hands are better than two! My wife did a good job.

Click to Enlarge

Peterk One Year Later

12/19/2025

Excellen, we dont use it daily but when we need it, its there.

by: Paul Frederick 02/25/2026

Good looking hitch. Easy to install even for a 70+ year old.
The u-tube videos helped a lot. Hitch could be packaged more securely, but the bolts and instructions were all taped to the hitch.

Click to Enlarge

by: Wompus Mike 08/22/2024

2022 Hyundai Tucson

I just wanted to pass this on to those wanting a trailer hitch from you. Went to the Hyundai dealer to get a hitch for my 2022 Tucion and just got a price.
Theirs was 2 X more than yours was,VERY same one you have! and double for the brake light connector (Which I didn't need) !
It fit perfect and now I'm more than happy doing business with you!

Click to Enlarge

Wompus M. One Year Later

8/23/2025

Worked out like a dream! But, I just got a newer car and ordered my second trailer hitch from you last week. It came in fast and I installed it the same day.

by: Luis 09/30/2026

2026 Kia Sportage

Worked out great. Already used to haul 2 bikes on a hitch mounted rack. Very stable. Only issue was it was delivered with hand sized hole on the box. Luckily all the parts were still there. Thanks for a fast delivery. Will use you guys again if needed.

Click to Enlarge

by: 2025TucsonHybridOwner 09/26/2026

My vehicle is 2025 Hyundai Tucson Hybrid Limited. This Curt trailer hitch fits. I didn’t have anyone to help me to install, so I had to use a jack to lift the hitch up. The passenger side, the tail pipe blocked the hitch to sit to the position. When doing this by myself, I struggled a lot to get the passenger side to the position. Anyone who is going to install with no help, use a jack and please anticipate you have to wiggle the tail pipe on the passenger side. I followed another buyer’s recommendation about the splash guard, cutting out the front part and put it back on by slip it between the installed new hitch and the rear bumper. For future buyers, I would recommend reinstalling the plastic splash guard (cut out the front side around those 3 screw areas) before installing your new hitch.

Click to Enlarge

by: Adrian 04/23/2026

2025 Kia Sportage

fits perfectly, I'm shocked!! great quality.
For future buyers - you can use jack to lift the hitch effortlesly. You dont need extra pair of hands.

Click to Enlarge

by: Peter 07/02/2025

i decided to try to install this myself on my wife’s 2025 tucson hybrid. i removed the underpanel - those strange attached plastic nuts required me to pull down on the plastic in order to get enough tension to loosen them, so the panel would release. i found out very quickly on my back under the car that i should have been bench pressing about 100 lb for the last few weeks - i did not want to drop the exhaust on a brand new car and i couldn’t get it past the exhaust without help. luckily a neighbor saw me with a 70 lb piece of steel resting on my chest and offered to help. it turned out that even after i got it past the exhaust, there was a small lip of steel on the chassis that prevented me from getting the hitch aligned with the screw holes. i only saw this after moving my head to the other side of the exhaust - thanks again to my neighbor for holding it in position - once i got the hitch above the exhaust i had to pull it slightly towards the front of the car to get it off the lip. i think this must be obvious if you are installing it from behind the car, but this wasn’t visible if you are under the car with your legs under the trunk. i did have to remove that side panel to get enough clearance for my socket set on that side (same issue with the aforementioned strange built in plastic nuts). all is installed and looking great - this hitch matches the finish of the tucson very nicely and almost all of it is hidden except for the receiver. will be used to tow our bikes on the Benton shifts and grins carrier that i am told just arrived! overall this was a little harder than i thought - i saw all those videos of people doing it themselves on jacked-up cars - but if you are doing this in your driveway i recommend (as do the instructions) to phone a friend to help for a couple of minutes.

Click to Enlarge

Brooke M.

7/11/2025

Thanks for the word of advice! Glad you have some good-natured neighbors too, Peter - not everyone has one! :) Thank you for sharing your experience and the photo! What will you be using the hitch to tow now that it's all installed and ready to go?

by: Daryl 09/28/2026

2026 Kia Sportage

Looks great. Installed just as advertised with the included hardware. 2026 KIA Sportage SX-P (non-hybrid)

Click to Enlarge

by: Tom 05/16/2025

Great products and competitive prices. Quick shipment. Super helpful videos which I really appreciate. In the last several years I have purchased 3 trailer hitches and a rear hitch mount bike rack from etrailer and all have been great with great communication, quick shipping, and good follow-up. This particular hitch purchase only took about 15 minutes to install thanks to the very detailed video.

Tom One Year Later

5/17/2026

1 year and the hitch is still great with NO rust at all. I see a lot of hitches with rust so I was concerned it would happen to mine but the paint is in great shape.

Gwendolyn Y.

5/18/2026

@Tom It's great to hear that the paint is holding up for you, Tom! What have you been using the hitch for, bike rack, tailer, or maybe both?

Tom

5/18/2026

@GwendolynY I am using the hitch primarily for a four-bike rack that I purchased here at etrailer.

by: Matthew 04/28/2025

I really like the hitch now that it's all installed - it was not too difficult but I wish they would have made the video a little more concise as it was a bit of a chore to get the hitch into place.
2023 Hyundai Tuscon PHEV Limited - I'm sure it could be done with 2 moderately strong guys, as it was, it took me (with RA on hands, wrists and body,) my wife and another woman to help in the middle (after getting the hitch in place properly.) We had some trouble getting the hitch (passenger side of vehicle) past the muffler and flush with the frame where the bolts mount to. I wish I could say how we finally accomplished it, but we had to be patient and keep manipulating both ends (from side to side[wheel to wheel] and backwards and forward [front of car to back of car]) until we got it into place. By then, we were both tired and needed a third person to lay down in the middle and hold the center up (like she was bench pressing it) while my wife and I each put one bolt on each end. From there it was easy to finish.

Btw, sorry if I annoyed in the (), as I was only trying to be absolutely clear for some to understand.

Overall, it's a great looking hitch at a great price. It also had the best video instructions that I was able to find for a good price on a brand name hitch.

Matt M. One Year Later

4/29/2026

Im sorry, but I no longer own this vehicle as we needed a larger vehicle for our expanding family and bought a 2025 Santa Fe limited. I will be installing an etrailer hitch on it soon, but havent wanted to spend the money just yet.

by: David 08/31/2026

2026 Kia Sportage

Wish the hitch stuck out a bit further. Can't fold my Thule bike rack up. Half inch more.
Build quality is very good. I did reuse the plastic under cover after trimming it. Took some time. Overall great product.

by: Tom 07/02/2025

Sturdy hitch for 2025 Hyundai Tucson. Easily installed even without a car lift. Just watch the YouTube video. Why pay the dealer $600?

Brooke M.

7/10/2025

Nice! Good to know it was an easy install for the new 2025 Tucson. And I think you're right - there are videos to help you save some dough :) What do you use your new hitch to tow?

Tom One Year Later

7/3/2026

Great. Installation not difficult with pre drilled holes in Tucson frame. Using with utility trailer and Thule bike rack

James D.

7/3/2026

@Tom love to hear it, what style of bikes do you ride? Thanks for your feedback and we appreciate you choosing etrailer!

by: Pete 04/30/2025

2025 Hyundai Tucson

The trailer hitch went in without a hitch. Everything worked out great no surprises. There were a few scrap marks on the hitch where you can’t see it not a big deal. The box was a little bit ripped up, but that wasn’t a big deal either. Thanks again for all the information And the great product you put out. Have a great day.

Pete One Year Later

5/1/2026

The trailer hitch is working great no problems whatsoever again the install was simple getting a hold of it was simple. Can’t go wrong.

by: Michelle 07/24/2026

2026 Kia Sportage

2026 Kia Sportage Prestige.
45 mins total. Took me and my brother 20 mins to install the hitch. The additional time was for cutting the first plastic piece you take off. We cut it in half (took a couple cuts to get the size right) and reinstalling it on each side of the hitch opening. I wanted to keep the under carriage, where the sensors are, as covered as possible from snow/salt in the winter. Only issue was getting the plastic snap pieces back in place. The plastic cover on the side you have to take off, didn't seem to be as secure when putting it back on. Not sure if they are one and done after you take them off. May have to buy new ones from Kia.

by: Al 08/07/2026

ford Edge

The trailer hitch fit perfectly and the installation was straightforward for my 2026 Kia Sportage.
I docked one star since the packaging from Curt was damaged where the backside of the hitch tube was protruding thru the cardboard box; the metal edge was dinged up and the paint was chipped off. The paint was also chipped off the outer edges of the brace tube. I took a file to smooth out the metal, lightly sanded and primered/painted those spots. It was more practical for me to repair the paint than to deal with sending it back for a replacement.
No pics, there are plenty of others out there showing a 2" hitch on the Sportage.

by: Carol 09/27/2026

2027 Kia Sportage

Very easy and straight forward install but definitely a 2 person job. The instructions were clear and the videos were very helpful as well. 6 bolts and washers is it and the car was already predrilled. Easy, maybe 40 min time mainly getting different wrenches, sockets to fit the tight areas.

by: Alan 04/22/2025

2025 Hyundai Tucson

The box came with a little damage. Not much. I gave them a four versus a five because I feel they could package the ends with packing material to protect it in case it comes through the box. It did mark up the paint. My fear is that that will be a spot for it to rust.

This was the hitch for my 2025 Hyundai hybrid Limited. It took me approximately an hour. Very easy. I dropped the back skid plate as mentioned, I did not have to drop the Muffler. I did take the plastic cover off on the passenger side so that I could get better access to the bolts with the torque wrench. Overall, very easy job to do. I would recommend having a helper.

Click to Enlarge

Gwendolyn Y.

4/23/2025

High-five on the solo install, Alan! What are you going to be carrying on your hitch?

by: Doug 10/08/2026

Great product, easy installation instructions and how to video. Salesman was great

by: FidusAchates 08/03/2026

2024 Kia Sportage

Fairly easy to follow instructions—my 2024 Sportage’s fasteners for the rear splash guards differed slightly, but I was able to pop them off the threaded studs. The hitch fits perfectly; I was able to lift it into place on a floor jack and thread the bolts single handedly.

by: Brian 10/14/2026

It fit the car perfectly and came with all the mounting hardware needed.

by: Robert 04/03/2025

2025 Kia Sportage

As others have noted, the shipping box did not fare well, but the hitch was packaged securely inside and had no scratches or dings. Perfect design and fit and really nothing complicated about install. Looks great on the Sportage. I've never owned or installed a hitch before, but I managed. I was surprised by new Kia special hex pins instead of nuts holding the panel on and those aren't easy to get off, needed to pick up a cheap set of panel tools. I highly recommend a motorcycle lift to hold into place as it took quite a while to get the last couple bolts lined up to thread.

Click to Enlarge

Brooke M.

4/4/2025

For a first timer, the install looks great. Love the pug hitch cover! Do you have any pet pugs?

1026

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Trailer Hitch Options for a 2025 Hyundai Tucson Hybrid
Denis, both the etrailer Trailer Hitch Receiver # e38KR and the Curt Trailer Hitch Receiver # C94WR will fit the 2025 Hyundai Tucson Hybrid. Both of these hitches have a bolt on design, requiring no welding, have a max gross trailer weight capacity of 3,500 lbs and a max tongue weight capacity of 525 lbs.
view full answer...
What Hitch Will Fit My 2025 Kia Sportage Hybrid For Bike Rack Use?
Hey Bernadette, We do have some options for your 2025 Sportage Hybrid! I spoke with Curt and the Curt Class 3 Hitch # C94WR is compatible with the hybrid model. This is a 2" hitch option with a 525lb tongue weight capacity, great for bike rack usage. Another option for your hybrid is going to be the EcoHitch # EH82KR. This 2" receiver has a 600lb tongue weight capacity, but what makes it stand out is its hidden design. The receiver tube is removable so when you are not using the hitch...
view full answer...
Recommended Hitch for Towing With 2026 Kia Sportage
Hey Brad! For a hitch that fits your 2026 Kia Sportage I recommend the Curt Trailer Hitch Receiver # C94WR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a concealed cross tube for a nice clean look and comes with a limited lifetime warranty. What will you be using the hitch for? If you plan on towing you will also need trailer wiring # C59236 and a ball mount like the etrailer Adjustable 2-Ball Mount # e66PR.
view full answer...
Trailer Hitch for 2026 Hyundai Tucson Limited Hybrid
Hey Gabe! For a hitch I recommend Curt # C94WR. This hitch fits all models of the 2026 Tucson, including your Limited Hybrid. The receiver sits right up under the bumper with the cross tube completely hidden. See the attached photo. What will you be using the hitch for?
view full answer...
Trailer Hitch and Wiring Recommendation for 2025 Hyundai Tucson
Hey Frank, for your 2025 Hyundai Tucson the hitch I would recommend is the Curt part # C94WR which is mostly hidden, has great towing capacities, and also is priced lower. For trailer wiring I would then recommend the part # CU94FR for a 4-way or the part # C68JR if you need a 7-way. What are you planning on towing?
view full answer...
What is the Ground Clearance Between the Curt and ECO Hitch?
Hello Ken, It looks like the measurement for the Curt and the Eco are going to be the same. We have not been able to do the install on the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # EH82KR but after reviewing the instructions the receiver is going to sit at just about the same spot. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C94WR is 11 1/2" from the ground to the bottom of the receiver. The # EH82KR might be a smidge higher than that. What are you...
view full answer...
Ground Clearance of the Curt Trailer Hitch part # C94WR on the 2026 Hyundai Tucson
Hi James, We installed the Curt Trailer Hitch Receiver part # C94WR on a 2026 Hyundai Tucson and in the video, they take some measurements of the hitch on the vehicle. It looks like from the ground to the top of the inside of the hitch measures about 15 1/4". Since it's measuring to the inside of the top of the hitch receiver tube that is 2" tall, that would give 13 1/4" from the bottom of the hitch receiver. If the shank of your bike rack has any drop that would need to be deducted from...
view full answer...
Best 2" Hitch Receiver For 2026 Hyundai Tucson Hybrid N-Line
Hey Darren, thanks for reaching out. Yes, we actually have several hitches for the 2026 Hyundai Tucson Hybrid N-Line. Here are all the available options: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C94WR - Trailer Mate Trailer Hitch Receiver - Custom Fit - Class III - 2" # TMT56FR - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e38KR - TowSmart Trailer Hitch Receiver - Custom Fit - Class III - 2" # TS96VR Out of these options,...
view full answer...
Which Curt Hitch Fits 2025 Hyundai Tucson Hybrid
Hey Alan, the Curt hitch part # C94WR that you referenced is a confirmed fit for your 2025 Hyundai Tucson and the recommended install method is to remove the lower bumper panel and leave it off. There might be a way you could remove the panel and modify it so that it could go back on but that's not something we can give guidance on. How come you were wanting to put the panel back on?
view full answer...
Best Trailer Hitch For 2026 Hyundai Tucson Plug-In Hybrid
Hey Dennis, thanks for reaching out. Yes, we do have a hitch that will fit your 2026 Hyundai Tucson plug-in hybrid. Here is what I recommend: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C94WR I double checked with Curt and they confirm this to fit the plug-in hybrid model. The hitch has a 2" receiver, a 3,500 lb towing capacity and 525 lb tongue weight capacity so it'll work great for hauling a good bit of gear or even a small trailer. It'll be a pretty straightforward...
view full answer...
Will RockyMoutns MonoRail Fit in Curt Hitch for 2026 Hyundai Tucson
Hey David, your RockyMounts MonoRail 2 bike rack # RKY10004 will fit and work great in the Curt hitch part # C94WR. When this hitch is installed there will be 3-1/4 inches from the center of it's hitch pin hole out to the furthest point on the rear bumper so that would mean you'd have an inch of clearance available for it to fit and clear. How do you like the MonoRail?
view full answer...
What is the Difference Between Curt and Towsmart Hitches for a 2025 Kia Sportage
Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver # C94WR and Towsmart Trailer Hitch Receiver # TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I don't know the details of it (and the manufacturers rarely go into the details), but what I can say is that in this case it actually ends up being more of a moot point because even the lower 3,500 lb rating of the Curt is well over what Kia...
view full answer...
Recommended Hitch and Wiring for 2026 Kia Sportage Hybrid
Hey Robert! For a hitch I recommend the Curt Trailer Hitch Receiver # C94WR. This is a Class 3 hitch with a 2" receiver and a bolt-on installation. The Trailer Mate # TMT56FR you looked at is also made by Curt, and isn't quite as robust. This is geared towards accessories, and since you want wiring as well I'm guessing you plan on towing, so the # C94WR is worth the extra money. Then for wiring you need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236....
view full answer...
Hitch and Trailer Wiring Harness for 2022 Hyundai Tucson
We do offer a hitch for the 2022 Hyundai Tucson, part # C94WR which is sold separately from the # CU94FR trailer wiring harness.
view full answer...
1-1/4 Inch Hitch Options for a 2026 Hyundai Tucson
Hi Tim, sadly we don’t currently have a 1-1/4 inch hitch available for the 2026 Hyundai Tucson. I know that’s probably not what you were hoping to hear if you already have 1-1/4 inch accessories, but the good news is you can still use them with one of the 2 inch hitches we carry. I’d go with the Curt Class III Trailer Hitch part # C94WR that you are looking at. It has a 2 inch receiver and a concealed cross tube, so once it’s installed you mainly see the receiver underneath the Tucson,...
view full answer...
Hitch Receiver Fitment for 2027 Kia Sportage Hybrid
Thanks for letting us help Thomas. Yes, the Curt Trailer Hitch Receiver # C94WR is a confirmed fit for the hybrid model of your 2027 Kia Sportage. This is a Class III hitch with a 2" receiver that's rated for up to 3,500 lbs of gross trailer weight and 525 lbs of tongue weight. Keep in mind that the hitch itself is rated considerably higher than the towing and tongue weight limits of the Sportage. You'll always want to stay within the maximum towing, tongue weight, and payload capacities...
view full answer...
2 inch Trailer Hitch Recommendation for 2026 Hyundai Tucson Hybrid
Hey Greg, this is a really great question but yes the Curt hitch part # C94WR is a great upgraded hitch for your 2026 Hyundai Tucson. Now for the 4-way wiring bracket it looks like it is riveted to the hitch. If it were me I would take that smaller bracket off and drill a couple small holes into the bottom of the rear bumper fascia and rivet it in place there. To remove the old rivets you would need to drill them out. Do you have a rivet gun by chance?
view full answer...
What hitch receiver has the farthest extension for a bike rack on a 2026 Kia Sportage?
Thanks for reaching out Rich, surely understand your concern. Bikes or the bike rack contacting your vehicle is never a good thing. For your 2026 Kia Sportage, the Curt hitch # C94WR is going to be a solid choice, especially for bike rack clearance. This hitch has a 525lb tongue weight capacity, that's plenty for bike racks. What rack do you have? What kind of bikes are you carrying?
view full answer...
Can 2023 Kia Sportage Hybrid Tow 1,400 lb Jet Ski Trailer
Hey Diego, yes the Curt hitch part # C94WR that fits your 2023 Kia Sportage Hybrid would be able to tow a trailer that weighs 1,400 lbs like you are looking for. This hitch has a capacity of 3,500 lbs and it looks like your vehicle is rated for up to 1,653 lb. For trailer wiring you'd want the Tekonsha kit part # TK32VR as it's very easy to install and also has the most reliable converter box of the kits available.
view full answer...
4-Way Mounting Bracket to Use with 2024 Hyundai Tucson with Curt Hitch and Wiring
Hey Ed, I would go with the part # C42CR for a 4-way bracket to use with the # CU94FR and hitch # C94WR. You'll attach this to the lower bumper edge of your Tucson and it will give it a nice and secure place to mount the 4-way. What are you towing?
view full answer...
Installer Needed for Installing a Hitch on 2023 Kia Sportage PHEV X-Line Prestige
Hey Robert! The easiest option is to use our Installer Locator tool, which I’ve linked below. Just enter your zip code and it’ll show you installers in your area that can handle the hitch installation. Since your 2023 Kia Sportage is the PHEV X-Line Prestige, I’d let the installer know that up front so they can take extra care around the hybrid components and wiring. The installation also requires some trimming around the rear bumper area, so you’ll want someone comfortable making those...
view full answer...
What Hitch and Trailer Wiring do I Need for My 2025 Hyundai Tucson?
Hello Dan, Congrats on the new 2025 Hyundai Tucson! What is your new favorite feature? At this time there is not any "plug-n-play" wiring for the 2025 Hyundai Tucson, I am sure the aftermarket guys are working hard to come up with a wiring harness. The vehicle must have had electrical changes from the 2024 to the 2025, so you will have to check back. If you wanted to splice in a harness, you could go with the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236....
view full answer...
Does Trailer Hitch that Fits Hyundai Tucson also Fit Kia Sportage
Hey Russell, it does look like you ordered the Draw Tite part # 75236 from us but it's actually for 2005-2015 Toyota Tacomas so what I think you are referring to is the Curt # C94WR that you ordered that does fit: 2023 - 2025 Kia Sportage 2022 - 2025 Hyundai Tucson Does that sound right? If you want replacement hardware for either hitch what you need is the part # RHK.
view full answer...
Will Trailer Hitch From 2006 Hyundai Tucson Also Fit 2023 Tucson?
Hello Joan, thanks for getting in touch. The hitch for the 2006 Hyundai Tucson, the Curt # C12126, will fit the 2005-2009 Tucson models. So it will not transfer over to the 2023, and you will need a new hitch. For that I recommend the Curt # C94WR. This has a 2" receiver, and this is the only receiver size available for the 2023 Tucson. If need be, you can reduce the receiver down to a 1-1/4" using part # e63YR. What do you plan to use the hitch for? Is it for a bike rack, or are you...
view full answer...

< Previous

12 3. . .8

Next >

Do you have a question about this Trailer Hitch?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Jameson C

Written by:

Lindsey S

Video Edited:

Joshua S

Video Edited:

Chris R

Video Edited:

Jonathan Y

Video by:

Dustin K

Video by:

Thomas T

Video by:

Samuel H

Video by:

Joshua U

Updated by:

Wilson B

Updated by:

Michael B

Test Fit:

Jacob H

Test Fit:

Ryan G

Test Fit:

Bradley B

Test Fit:

Jesse B

Test Fit:

Bruce K

Test Fit:

Daniel M

Test Fit:

Davonta F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.