Installer Needed for Installing a Hitch on 2023 Kia Sportage PHEV X-Line Prestige
Updated 10/01/2026 | Published 09/29/2026 >
Products Featured in This Question
Question:
who could I get to install this etrailer hitch on my 2023 Kia Sportage PHEV x-line Prestige?
asked by: Robert M
Expert Reply:
Hey Robert!
The easiest option is to use our Installer Locator tool, which I’ve linked below. Just enter your zip code and it’ll show you installers in your area that can handle the hitch installation. Since your 2023 Kia Sportage is the PHEV X-Line Prestige, I’d let the installer know that up front so they can take extra care around the hybrid components and wiring. The installation also requires some trimming around the rear bumper area, so you’ll want someone comfortable making those cuts cleanly.
The Draw-Tite Max-Frame Trailer Hitch Receiver # DT22MR you were looking at has been phased out following changes with Draw-Tite’s parent company, so availability is becoming limited. Instead, I recommend the Curt Trailer Hitch Receiver # C94WR. It’s confirmed to fit your 2023 Kia Sportage PHEV and gives you a 2" Class III receiver with a 3,500 lb trailer weight rating and 525 lb tongue weight rating. You’ll still want to follow the towing limits Kia lists for your specific Sportage in the owner's manual, since the vehicle’s rating takes precedence over the hitch rating.
If you’re only using the hitch for a bike rack or cargo carrier, the # C94WR may be all you need. If you’re planning to tow, I’d also add the Curt T-Connector Vehicle Wiring Harness # C99DR. This gives you a 4-way connector for your trailer’s running lights, brake lights, and turn signals.
If the trailer has electric brakes, you’ll also need our Universal Installation Kit # ETBC7 to convert that 4-way into a 7-way and provide the circuits for 12V power, reverse lights, and the brake controller signal. From there, I recommend the Redarc Tow-Pro Liberty Brake Controller # RED52VR. It gives you proportional braking while keeping the control knob small and unobtrusive inside the Sportage.
So for a complete towing setup, I’d go with the Curt Hitch # C94WR, Curt Wiring Harness # C99DR, # ETBC7 installation kit, and the Redarc Tow-Pro Liberty # RED52VR.
Are you installing the hitch for a bike rack or cargo carrier, or are you planning to tow a trailer?

Alan I.
10/1/2026
I installed the hitch on my PHEV Sportage and had to remove a small plastic cosmetic shield to do so. NP! There are only 6 bolts to hold the hitch and yes it was awkward to line up with out help but very doable (heck im in my 70’s and i could do it). The problem i had was when using with my bike rack, the car saw the bike, thought i was going to hit something so I would brake. Yes you could disable this each time you started your car OR install the wiring harness for the lights that my car was already pre wired for behind the rear panel.(check your specific model to get the right harness. I ordered wrong the first time and had to replace it) Like most people I YouTubed it, popped the panel off, ran the wire and plugged it in, reinstalled the rear side panel in the hatch, and now when i install the bike rack, i plug in to the jack i installed and there is no reverse issue and i have the added benefit of being safer with functioning brake lights and turn signals on the bike rack. Well built, and easy to install with a little effort.

Product Page this Question was Asked From
Curt Auxiliary LED Indicator Lights
- Accessories and Parts
- Hitch Bike Rack
- Hitch Cargo Carrier
- Lights
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bike wheel holder
- Search Results: cargo nets
- Search Results: car awning
- Search Results: megawarrior
- Search Results: yakima roof bike racks
- Search Results: one up
- Search Results: roof bike racks
- Shop: MoonShade Original Awning - 9' Long x 7' Wide with Oval MoonMount Anchors
- Shop: Yakima Fork Adapter for Bikes with 15-mm x 110-mm Boost Thru-Axle Forks
- Shop: Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount
- Shop: Curt Cargo Bag for Roof Basket - Waterproof - 21 Cu Ft
- Q&A: Mounting Bike Racks on Yakima LoadWarrior That Interferes with Fairing
- Shop: Large Stretch Net for Yakima Roof Cargo Baskets - 45" x 38"
- Shop: Bike Wheel Holder for Saris Traps - Single or Triple Track
- Shop: Yakima Universal Fork Adapter for 15-mm, Thru Axle Forks
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Video: In-Depth Look at the B&W 5th Wheel to Gooseneck Pin Box
- Shop: Gooseneck Hitch


Edward
10/1/2026
I had a Thule 2-bike rack that I had e-trailer add the auxiliary turn signal LED bars to my rack. I had a set added to the surface when in the UP & DOWN position with a quick plug and unplug to the main wiring harness. This added the safety of additional lighting needed when bikes were on the rack or not on the rack which when added with the main vehicle lights keeps tailgating a non issue during the day and night. Also during heavy rain which lights up the entire rear of our car. Hope this helps with your decision