2 inch Trailer Hitch Recommendation for 2026 Hyundai Tucson Hybrid
Updated 09/24/2026 | Published 09/20/2026 >
Question:
I have a 2026 Hyundai Tucson Hybrid that came with a Class 2 hitch and wiring harness see photo. I would like to replace the hitch with a Class 3 hitch that I can use with the Hollywood Racks Destination E bike rack. Im considering the Curt C94WR, but Im not sure what I need to reconnect the wiring harness. Do you have any suggestions?
asked by: Greg R
Expert Reply:
Hey Greg, this is a really great question but yes the Curt hitch part # C94WR is a great upgraded hitch for your 2026 Hyundai Tucson. Now for the 4-way wiring bracket it looks like it is riveted to the hitch. If it were me I would take that smaller bracket off and drill a couple small holes into the bottom of the rear bumper fascia and rivet it in place there. To remove the old rivets you would need to drill them out. Do you have a rivet gun by chance?

Thomas A.
9/24/2026
I bought a CURT 58301 Vehicle-Side Trailer Wiring Harness Mounting Bracket and taped it to the side of the hitch receiver with LLPT double sided, weatherproof mounting tape. It's been on my 2024 Tucson for two years without issues.

Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Q&A: Is there a 2" Hitch for a 2026 Kia Sportage Hybrid?
- Q&A: Best 2" Hitch Receiver For 2026 Hyundai Tucson Hybrid N-Line
- Q&A: Trailer Hitch for 2026 Hyundai Tucson Limited Hybrid
- Q&A: Recommended Hitch for a 2026 Kia Sportage Hybrid
- Q&A: Hitch Receiver Fitment for 2027 Kia Sportage Hybrid
- Q&A: What Hitch Will Fit My 2025 Kia Sportage Hybrid For Bike Rack Use?
- Q&A: 4-Flat Wiring Harness For 2026 Hyundai Tucson Hybrid
- Article: Trailer Hitch Installation Tips
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)



Greg R.
9/22/2026
The existing bracket is just bolted onto the hitch. I was able to remove the bracket and harness. I just need to find a good way to reattach the harness somewhere.