Result: a25

That's a really good question, they do look very similar. I recommend the A25 #C16046 for your 2019 Ram 3500 with an 8ft bed and factory puck system. The A25 has a 2 piece jaw that overlaps slightly, where the Q25 butts up against the other. This…

The Curt A25 5th Wheel Trailer Hitch, #C16046 and the Q25, #C16049 are confirmed to fit your 2021 Ram 3500. The Curt A25 hitch is a newer version from Curt featuring a stronger head unit made of a more durable material and in addition has an easier…

It sounds like you might already have a Q24 from your old setup and would like to use it with your 2024 GMC 3500. The fixed Q24 #C16245 (for above bed rails) or #C37FR (for OEM prep package) will fit if you have the short bed. However, you are going…

The adjustment holes on the Super Titan Forged Pintle Hook Plate part #RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and…

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

This is a great question. The B&W OEM Companion #BWRVK3715 and the Curt A25 #C24FR for the factory pucks on your 2020 GMC Sierra 3500 (congrats on the new truck, by the way!) represent the very peak of fixed 5th wheel hitches on the market.…

The two best options from what you mentioned are the Reese M5 part #RP30918 and the Companion #BWRVK3600. If you wanted to go with a Curt the A25 part #C16046 would be the better option as this essentially is the updated version of the Q series with…

I attached a link to this page that has the install instructions for the Axle Riser Kit #LC382741 that you referenced.

According to Lippert, the mounting nuts should be torqued to 120 ft-lbs for the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741.

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

For toy haulers and RVs like your 2012 Keystone Raptor 365LEV there is only one 8 lug bolt pattern and that is the 8 on 6-1/2 inch like the #AM20766 that you referenced.