Result: SHACKLE STRAPS

Hey Roger, the MORryde part #MR87ZR could work for you but you would need to go with slightly shorter leaf springs at same time to compensate for the longer equalizer. Instead what would work best would be the #LC279687 which matches the dimensions…

Hey Duane, The Hellwig kit you referenced was designed for trucks and would not work for your trailer but we can still help. What you'd want instead is the SumoSprings kit part #TSS-106-40 which is for lighter duty trailers with underslung…

Hi Tim; I can get you everything aside from the hangers. All of our standard hangers are designed to weld on but you may be able to find that bolt-on style elsewhere online or at a local shop. Hangers like those do still exist although I'm not…

Hey Joe, welcome back! With a 35" wheelbase the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR is the correct fit. I verified your Reflection has 6k axles on the Grand Design parts site so the #APUBR-8 is also correct and so is…

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.

I checked with Dexter, manufacturer of many trailer parts, and according to them there should be at least 1 inch of space between the tires when under load. So once your trailer is loaded and ready to tow, if you have more than 1 inch of space…

Actually, what will solve your axle-to-frame clearance issue you are having the easiest would be to move the axles from being above the leaf springs to below the leaf springs. That will give you a great deal more clearance between the frame and the…

Thanks for reaching out again, Scott! I recommend using the Lippert Bolt-On Shock Kit #LC281281 over the Roadmaster Comfort Ride #RM-2460 for your application. Both will install with the axle located below the leaf spring stack and the Lippert shock…

Hi Travis; those look pretty flat so I don't think 26" would do it either. The 25-1/4" long #EM86RB you ordered will be a better fit. Completely flat these would have a similar measurement at just over 26" which is in line with…

Hey James, thanks for the information! To replace the inner member of your Dexter actuator we've got a couple of options depending on which one you actually have. The Model A60/A75/XR84 you have stamped on your is three different styles of brake…

The correct replacement equalizer for your 13-104 is TruRyde Curved Equalizer #TREQ104. If you need the kit, you can use the Redline Tandem-Axle Trailer Equalizer Kit #AP233. The upgrade we offer for the 13-104 equalizer is the Dexter E-Z Flex Heavy…