Result: Equa flex

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

Hello Ken, thanks for writing in. The longer 3-1/8" shackles in the MORryde Suspension Upgrade Kit #MR76ZR are usually fine to use with the Road Armor equalizers #LC53CK on your 2020 Cougar 24RDS. Road Armor equalizers are taller than standard…

Thanks for all the information Chad and welcome back! It definitely sounds like your axles bent. To replace your Jayco's overslung 3,500 lbs axle, I recommend the Lippert Trailer Axle Beam with Super Lube Spindles item #LC33PK. The Lippert…

A leaf spring being 1-1/2" longer is going to be to much of a difference to work properly for the trailer suspension. While it may bolt up the positioning of the axles will change by quite a bit and may bind up as the suspension travels through…

Hey Joe, long time no see haha! So if you wanted the best cushioned equalizer for a 33 inch wheelbase the MORryde Alltrek 4000 kit part #MR89DR would be what you'd want. This is only option that has vertical and horizontal cushioning so it's…

Yes you can replace the leaf springs that came standard on the trailer to soften the ride of the trailer. Just be advised that the total capacity of the trailer will be lowered because you will be limited by the lower rated springs. You can refer to…

Hey David. Based off of wheel base the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers item #MR29DR is going to be the closest option. However, I recommend measuring one of your current equalizers so we can be sure this is the best fit. A…

Hey Mark, the only real downside to an offset ball like the Gen-Y part #GY43XR is going to be that it costs more typically and it would take up more room when stored compared to a non-offset ball like the #C38CR. The handling and weight carrying…

Hey Robert, welcome back! The yellow blocks you're looking at on your Reflection are part of the OEM Lippert Correct Track system. You can use your MORryde X-Factor Crossmembers #MR33WR but you will need to add the MORryde X-Factor Crossmember…

Hi Robert; you could use the LaSalle Bristol Waste Valve #34466N11AA as a replacement but the handle will sit underneath the trailer right at the valve. Looking at the Grand Design parts site it looks like you have a 1-1/2" Valterra with a…

The MORryde Suspension Upgrade Kit for Triple Axle Trailers #MR26ZR is a universal application and will work if your current shackles are 3-1/8" long (from center of eye to center of eye). This is designed to work with the standard 1-3/4"…

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…