Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Chris, Great question, and honestly your read on this is pretty spot on. What you’re running into is a disconnect between what the aftermarket hitch, like the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" #EH97CR, is capable of…
view full answer...Good morning, Dana! Yes, you are in luck because the new models use WFCO’s Auto-Detect charging, making it compatible with: -Lead-acid (flooded and AGM) - 3-stage charging -Lithium - 2-stage charging up to 14.6V No switches. No settings. The…
view full answer...Hey Daniel! That’s one of the benefits of these newer WFCO Auto-Detect panels. You won't need to replace anything again since they are compatible with lithium. The new models like #WF46FR, #WF86FR, and #WFC72GR all automatically detect lithium…
view full answer...Yes sir! You can use the Installation Kit for Go Power Inverters - 200 Amp Fuse - 12V and 24V #342GPDCKIT3 for installing the Go Power Inverter #GP94XR. This new inverter is a pure sine wave, which means it has very clean and smooth power output for…
view full answer...Hey Greg, welcome back! The Progressive Dynamics 2000 Watt Inverter w/ Transfer Switch #PD64FR prioritizes shore power over battery power. When shore power is detected at the AC input port the transfer switch will automatically disconnect the…
view full answer...Hey JP, the only option we have is the part #PD4655V that you referenced. This does have a single stage lithium battery charger which is all that lithium batteries require. This does replace the lower section of your 8355 so it does play nicely.
view full answer...Hello again, Phil. Out of those two options I definitely recommend the Reese Dual Cam II #RP65FR with the no-drill frame brackets. In my experience, any WD system that uses no-drill L-brackets that bolt to the frame is going to be much easier to set…
view full answer...I've attached the installation instructions for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR for you below.
view full answer...I've linked a help article that will give you the common color coding but on your trailer I wouldn't go by it. Even if they are correct you just never know so I suggest testing it. To test it cut off the 5-way connector that's on there…
view full answer...The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Hey Jason, The EcoHitch Stealth Trailer Hitch Receiver #EH97CR weighs 40lbs and the Curt Rack Receiver #C92NR weighs approximately 30lbs. The3 Curt is rated only for carrying hitch mounted accessories and isn't rated for towing a trailer.…
view full answer...