Search: Adapter Led Trailer Lights   >  

To get your 2023 Chevy Equinox ready to flat tow you'll need to complete the following steps: 1. Position the vehicle to be towed and secure it to the towing vehicle. 2. Start the vehicle. 3. If equipped with AWD, engage the AWD system and…

If you already tested the outlet and are receiving power and the fuse is good inside of your monitor cord and the monitor still will not turn on then you will need to replace the monitor as something internal must be wrong with the monitor. You can…

You will still be able to use the trailer with the 4-Way after installing the 4 to 5-Way adapter, #20036. First, you could just remove the adapter if you wanted to and then plug in the 4-Way like normal while stowing the adapter in the truck. The…

The Nerf Bars that install with the hardware you referenced do attach to the frame, as you can see by the accompanying cut out of the instructions that I added. It is important to note that the Replacement Mounting Brackets and Hardware for Westin…

If the lights on your trailer were acting fine prior to installing the LEDs then you need to start off by checking the ground connections for your lighting. Make sure they are securely connected to a clean, bare-metal surface as even some paint can…

The first thing I recommend doing is to check that the ground wire for the lights is securely attached to a clean metal surface on the trailer frame. A loose ground wire will keep the lights from working. If the ground attached to the trailer does…

In order to help you troubleshoot this issue I need to ask you a few questions. On the trailer, do the turn signals operate properly, meaning do they flash at the expected rate? Were the LEDs installed recently as replacements or are they the…

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…

Running a direct ground up to the trailer tongue or junction box would certainly work, but the only time I'd see that as being necessary is if the lamps were connected to a non metallic structure or a metallic structure that wasn't directly…

According to what you told me, since it's not the LED lights, you may want to re-check the ground on the vehicle side. Since you are not getting the proper signals to the trailer lights then you will want to start off by making sure your vehicle…

It is pretty common for new vehicles to have issues with registering that a trailer with LED lights is connected due to the power draw being so much less than the computer on your 2021 GMC Sierra 1500 is expecting to see. What you need is the 7-Way…

When someone is experiencing out of control or hyper flashing turn signals, a few things come to mind. First would be, does the trailer have LED lights? If so, installing load resistors, #DI34ZR, on the turn signal circuits should solve the problem.…