Hey Andy, the Ventline Roof Vent part #V3092-603-00 does not include a garnish. You can pair this with either the Polar White #VA0445-33 or Birch White #VA0445-25 ceiling garnish which is designed to fit roofs 7/8" to 2" thick. How thick is…
Hey Roger, thanks for the information! I reached out to Marine Master because I wasn't able to find any information, and this is what they replied to me with: "This trailer came with original oil bath hubs with the DB-42 brake system. The…
Roadmaster makes a base plate kit that is designed specifically for the Rugged Ridge bumper like you have which is part #1437-3 which you could attach a Roadmaster tow bar like the Falcon 2 #RM-520 directly to.
Thanks for the pictures! Since your UFP Gold Series oil bath hubs have a 1.98" outer bore then yes, the Kodiak XL ProLube Oil Bath Hub Body and Cap item #xlprolube1980 would work for your boat trailer. The directions say to fill to…
We don't have the UFP Brand, but I can give you some compatible parts. For your trailer hubs with rotor, I recommend the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs #KHR10D. You will need grease seal #RG06-050 along…
I spoke with my contact at Roadmaster and I have the following measurements for the Roadmaster MS Base Plate Kit - Fixed Arms Item #1437-3. The rectangular plate is 6-11/16 inches long by 4 inches tall overall. The mounting holes are spaced 5-3/16…
Hey Elias, thanks for reaching out! We have the parts #290-991 and #290-992 that you referenced, but the 290-993 for 2.72" OD Hubs was actually discontinued back in 2023 which is why you are having a hard time finding it. You can use a rubber…
Yes, you can use the Camco water heater element part #CAM02143 that you referenced in your Suburban hot water heater. We've checked with Camco and they've told us this would work as well as had customers come back and let us know that it…
Hey Brian, we have a replacement inner member for the TDE LP8500 you have with the part #DX97UR. This replaces the inner portion of the actuator and allows you to leave the outer part attached so you don't have to do any welding.
Filters
