Result: knobs

Since the Tow-Pro Elite has a control knob that is seperate from the actual controller unit it allows you to mount the control knob pretty much anywhere you feel like. | Can you replace the cigarette lighter...

To the left of your steering wheel you have the knob for your lights. I recommend installing the knob just under here in the open space. | Hi! I have a 2022 Jeep Cherokee Trailhawk that has the tow package....

If you're ok with losing your 12 volt outlet by your shifter you can use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-003 to install the knob. | I have been a long...

Including the Ford Style dash for the control knob. Thanks in advance. | I am interested on installing this controller on my 2020 Ford Ranger with factory tow package 7 pin. If I order this item, are there other parts I need...

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

If the screws you are using are M6 screws then the knob should fit no problem. I went out to the warehouse and took some measurements of the locking cover for you to reference and compare to what you currently have so that you can have a better idea if it will fit or not. |

The only part visible is the control knob. We have a couple of other mounting options for the control knob that can go inside inserts in your dash. | Hi- I have a 2020 Jeep Cherokee Trailhawk. Bought it used....

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

I have been looking at Redarc and Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - Up to 4 Axles - Proportional - thank you | what brake controllers best fit a 2021 Ford Ranger Lariat with a factory tow package?...

You will then be able to turn the controller knob fully counter-clockwise, press the brake pedal, double click the brake knob twice within 1 second and then release the brake pedal this will change the light from blue to green. |

The main unit can be mounted in any position, and the control knob mounts in the dash of your vehicle. The knob uses a colored LED for diagnostics and works as a manual override when pressed. | I was looking...

This brake controller allows you to mount the main unit out of sight with the knob mounted in the dash. The knob allows for quick and easy adjustment and also functions as a manual override. | Can I use the...

The Redarc Tow-Pro Liberty Brake Controller # RED24FR activates trailer brakes in proportion to your vehicle's braking action, has simple diagnostics with bright, colored LED and you only have the sleek control knob, instead of a bulky brake controller. You can pick up the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide for a more clean and factory style look. |

In the video you can see David easily completes the installation with the most difficult part being when he pops the 12v outlet out to replace it with the knob for the controller so that he doesn't have to drill a new hole in the dash to install the knob. |

In order to build an additional upright you will need 4 nylon inserts, 2 locking knobs, 2 mounting feet, 2 upright posts, 2 tie down cleats, 1 crossbar, 2 end caps, 2 corner braces, 2 saddles, and 1 hardware kit. | I am wondering...

Slowly raise the knob until the system shuts off and then raise it 1/8" higher. | When towing with Stay-in-play off, tail lights on toad function normally. With Stay-in-play on blinkers alternate left and right, not matter...

It allows for simple access to your '19 Cherokee's rear cargo area via a foot lever that you can press to tilt the rack down, tightens in your hitch with the twist of a knob, and the aforementioned padded clamps uses knobs that click when they are securely around your bike's frame. |

I see that the Redarc has a separate adjustment knob that you mount wherever desired. The knob then plugs into the control box and the Ranger factory wiring gets spliced into a 4-wire pigtail that then plugs into the controller to complete the installation. |

Didn’t know which Custom harness dash knob I would need. Thank you. | I have a 2024 Ford Ranger XLT with tow package. What do I need to order for this to be a plug n play install, also I would like the button to be mounted...

Adjust the feet to fit your mirror housing and then twist the tightening knob. Please note the attached product review and installation videos. | Do these sideview mirrors extensions fit well on the 2021 Ford Ranger? | The...

The knob adjusts the braking power and also acts as the manual override. | I need everything to tow a trailer with brakes with my 2021 Ford Ranger, hitch, wiring, ball, brake controller. What should I get for this? Can you...

I like the Redarc style with only the knob exposed | I have a 2022 Ford Ranger what trailer brake controller do I need. I like the Redarc style with only the knob exposed | The Redarc Tow-Pro Elite Brake Controller part # RED44FR...

It’s a really clean option because it uses a small dash mounted knob instead of a bulky controller, and it comes with a custom harness designed for Ford trucks like yours. | I have a 2025 ford ranger with factory tow hitch...

For a brake controller the Redarc Tow Pro Liberty part # RED52VR would be a really great choice that works well and only puts a small knob on your dash. What RV do you have? | 2019 Ford Ranger with tow package. Do I require...