Result: knobs

If you're ok with losing your 12 volt outlet by your shifter you can use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-003 to install the knob. | I have been a long...

Including the Ford Style dash for the control knob. Thanks in advance. | I am interested on installing this controller on my 2020 Ford Ranger with factory tow package 7 pin. If I order this item, are there other parts I need...

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

just wondering, regarding attaching the carrier to the crossbars, the u-bolt goes under the crossbar, then a bracket is placed over the threaded ends, inside the carrier, then tightened by screwing on the knobs..........would it be safe to not use the brackets and just screw on the knobs to the ends of the u-bolt? |

I have been looking at Redarc and Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - Up to 4 Axles - Proportional - thank you | what brake controllers best fit a 2021 Ford Ranger Lariat with a factory tow package?...

You will then be able to turn the controller knob fully counter-clockwise, press the brake pedal, double click the brake knob twice within 1 second and then release the brake pedal this will change the light from blue to green. |

The main unit can be mounted in any position, and the control knob mounts in the dash of your vehicle. The knob uses a colored LED for diagnostics and works as a manual override when pressed. | I was looking...

This brake controller allows you to mount the main unit out of sight with the knob mounted in the dash. The knob allows for quick and easy adjustment and also functions as a manual override. | Can I use the...

In the video you can see David easily completes the installation with the most difficult part being when he pops the 12v outlet out to replace it with the knob for the controller so that he doesn't have to drill a new hole in the dash to install the knob. |

Last but not least, I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. This is my favorite brake controller because the main unit stays hidden behind the dash, leaving only a small control knob visible. |

I see that the Redarc has a separate adjustment knob that you mount wherever desired. The knob then plugs into the control box and the Ranger factory wiring gets spliced into a 4-wire pigtail that then plugs into the controller to complete the installation. |

Didn’t know which Custom harness dash knob I would need. Thank you. | I have a 2024 Ford Ranger XLT with tow package. What do I need to order for this to be a plug n play install, also I would like the button to be mounted...

Adjust the feet to fit your mirror housing and then twist the tightening knob. Please note the attached product review and installation videos. | Do these sideview mirrors extensions fit well on the 2021 Ford Ranger? | The...

It's really just a matter of twisting the release knob to allow it to install or remove. The plug that comes with it when not in use is also really easy to install and remove as well. | How easy is unlocking and switching out...

The knob adjusts the braking power and also acts as the manual override. | I need everything to tow a trailer with brakes with my 2021 Ford Ranger, hitch, wiring, ball, brake controller. What should I get for this? Can you...

Hey Jason, I would recommend the Redarc Tow Pro Liberty part # RED52VR as it performs really well and only puts a small knob on the dash of your 2023 Lexus RX 350. To install it you'd need to first start with the 4-way kit part # TK92KR and then convert it to a 7-way with the part # ETBC7. |

The EasyFold XT has a nifty ramp so you can easily load your bike, allows for simple access to your vehicle's rear cargo area via a foot lever that you can press to tilt the rack down, and tightens in your hitch with the twist of a knob. IT also gives you security with integrated locks in the clamps that secure your bikes to the rack and a lock in the knob that secures the rack to your hitch. |

I am not sure if the T-knob can be place under the cross bar. Is there a minimum requirement between the cross bar and the roof? | Hi, I have 2015 Lexus RX350 and wondering if #MAL38FR can be installed on the vehicle. The...

I like the Redarc style with only the knob exposed | I have a 2022 Ford Ranger what trailer brake controller do I need. I like the Redarc style with only the knob exposed | The Redarc Tow-Pro Elite Brake Controller part # RED44FR...

It’s a really clean option because it uses a small dash mounted knob instead of a bulky controller, and it comes with a custom harness designed for Ford trucks like yours. | I have a 2025 ford ranger with factory tow hitch...

For a brake controller the Redarc Tow Pro Liberty part # RED52VR would be a really great choice that works well and only puts a small knob on your dash. What RV do you have? | 2019 Ford Ranger with tow package. Do I require...

The receiver on the Hidden Hitch by Draw-Tite Trailer Hitch item # DT58GR has a locking knob that you turn to disconnect it from the rest of the hitch. | 2021 Lexus RX 350 non F-Sport: Does the hidden receiver part need to...

When we did this install on the 2019 Ranger we used the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-003 to mount the # RED44FR which replaced one of the factory 12v outlets, but you can mount the knob in another location if desired. |