Recommended Trailer Wheel Bearing Grease for Dexter Axles
Updated 08/17/2020 | Published 08/01/2011 >
Products Featured in This Question
Question:
I want the grease I apply to my new Dexter Axle wheel bearings to be compatible with the factory applied grease. What type grease is used in the OE assemblies so I can be sure what to buy for periodical greasing! I have a 2011 Horton 6x10 with Dexter 3,500 lb brake axles and E-Z-lube axles! I also want to buy a spare brake hub assembly but my manual does not list what Dia. brake hub I have! Your assistance is greatly appreciated on these items.
asked by: Paul
Expert Reply:
Usually when you replace parts that get lubricated, you clean all of the existing grease first before adding any new grease, just in case there is a compatibility issue. Since you are using Dexter axles and replacing components with Dexter parts, the grease will be compatible.
For wheel bearing grease, use # L11465, or # L11380. This is a polyurea-based grease that is compatible with most grease formulas of the same or similar chemical makeup. Take a look at our grease help article, linked to the right, that includes a compatibility chart.
For the hub assembly, I would need the bearing numbers stamped into the inner and outer bearings. With those numbers and the wheel bolt pattern, I should be able to find the correct part.

Product Page this Question was Asked From
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Search Results: wheel bearing grease
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: dexter hubs
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Search Results: grease
- Search Results: trailer receiver lock
- Search Results: hub grease
- Search Results: hitch pins and clips
- Search Results: 92865 trailer hub
- Video: Detailed Breakdown of the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Q&A: How to Grease a Dexter EZ Lube Axle
- Video: Review of LubriMatic Lubricants Sealants Adhesives - Poly HP-2 Grease - L11465
- Q&A: Will 6k Brake Assemblies fit 5,200 lb Trailer Axle
- Video: Feature Review LubriMatic LMX Industrial Strength Grease
- Shop: Master Lock Set - Coupler Ball Lock, Locking Hitch Pin, and Coupler Latch Lock
- Shop: Trimax Universal Anti-Rattle Clamp for Class III and IV Trailer Hitches
- Q&A: Replacement Leaf Springs for Trailer With 25-1/4" Flat Leaf Spring
- Q&A: What Axle Capacity Leaf Spring for 2018 Jayco Seismic 4212
- Q&A: Which Wire on Dexter Trailer Brake Magnets is Power and Ground
- Video: Choosing the Right Tow Bar Wiring
- Article: Trailer Maintenance Schedule
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: All About the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Q&A: Which Grease Should be Used with a Dexter Trailer Axle
Wylie
8/6/2020
I talked to Dexter and they said they use Red synthetic Lithium 2 grease from the factory. All of the comparability charts I have read say Lithium complex and Polyurea are not compatible.
Chris R.
8/17/2020