Hitch Needed for 1995 Nissan Maxima

Question

Question:

I am looking at buying this hitch from NAPA. They say it will fit my 1995 Nissan Maxima GLE. Will it fit this vehicle like your video shows it bolting onto the newer Altima?

asked by: Dave

0

Expert Reply:

The hitch you referenced, the Draw-Tite Class I Receiver, part # 24796 fits the 2009-2011 Maxima or the 2007-2011 Altima only.

For your 1995 Maxima, I would recommend the Curt Class I, part # C11255. The Curt receiver attaches, as it uses two additional attachment points to the bumper structure.

If you are planning on towing a trailer, you will also need the trailer wiring harness, part # 119178KIT, a ball mount part # 3593, a pin and clip part # PC2, and the appropriate sized trailer ball. For a 2 inch ball, use part # 19258 or if a 1-7/8 inch ball is needed, use part # 19257.

I will include links to the installation details for both hitches, as well as a link to a video showing how to install the wiring. The video shows the harness being installed on a different vehicle, but the process would be similar for your Maxima.

expert reply by: Mike L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hey Miles, yes we have confirmed that the EcoHitch part #EH97FR does fit the 2025 Toyota Rav4 Hybrid Plug In. There is some lower fascia trimming needed to install the hitch but not a significant amount at all. What will you be using the hitch for?

view full answer...

Answer 7

Hey Dan, welcome back! We don't have much information on the Curt Trailer Hitch item #C67RJ at this time. We just know it's going to fit the 2023 Toyota Prius. That being said, I took a look at your order history and I think you've…

view full answer...

Hitch Needed for 1995 Nissan Maxima

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching