View Cart
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24796

lowest price pledge

Retail:$170.22

Our Price: $95.95

You Save: 44%
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping

Shipping Weight: 21 lbs

Quantity: 
In Stock
Draw-Tite Custom Fit Hitch - 24796
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Draw-Tite
  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • 200 lbs TW
  • Custom Fit Hitch
  • Visible Cross Tube
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24796 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (114)
  • Q & A (75)
  • Videos (12)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24796

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24796 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60873 Hidden Hitch Class 1 Trailer Hitch Receiver



24796 Installation InstructionsInstallation Details 24796 Installation instructions

This Product Fits The Following Vehicles

2014 - 2019 Nissan Altima

2009 - 2019 Nissan Maxima

2007 - 2013 Nissan Altima Sedan



California residents: click here


Video of Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2017 Nissan Altima - Draw-Tite

Speaker 1: Today on this 2017 Nissan Altima you'll be having a look at, and being shown how to install, the Draw-Tite Class I Trailer Hitch Receiver, part number: 24796. Here's what our hitch looks like installed. One nice thing about this hitch is that it's very well tucked up underneath our vehicle, and behind the vehicle, so you don't have to worry about running your shin into it or having it stick out past the bumper causing an obstruction. It's a nice clean look on our Altima. On the side of our receiver you'll find our industry standard 1/2" diameter hitch pin hole for securing any of our hitch-mounted accessories. Welded onto the bottom of our receiver is our rolled steel tubular design safety chain loop, which is easy to hook onto for most sized chains.

This hitch features a 200 pound max tongue weight rating, which is the amount forcing down, and a 2,000 pound max gross trailer weight rating, which is the amount it's rated to pull. You'll want to consult with the owner's manual of your Altima and not exceed the limits of the hitch or the vehicle itself when towing. Just go by whatever number is lowest.Now for a few measurements to better assist you in choosing any hitch-mounted accessory you may need, such as a bike rack or a cargo carrier. You're looking at about 9-1/2" from the ground to the top of the 1-1/4" receiver opening, and about 7" from the center of the hitch pin hole to the rearmost part of the back bumper. Now that we've gone over some features, we'll show you how to get it installed.To begin our install, we'll open up our trunk.

We've already gone ahead and removed all of our floor coverings so we don't drill into them. You can leave your spare tire in position. All right. Now we need to remove our mufflers on both sides of the vehicle. We'll find a clamp right here, which holds it to our pipe.

It's a 15mm nut. We'll loosen these nuts. Now we'll unbolt this exhaust hanger right where our mufflers meet our Y-pipe. There are two 12mm bolts. Now we'll grab our mufflers and wiggle them off our Y-pipe.

Okay. Once we have it disconnected off our Y-pipe, we can take our muffler and slide it towards the rear of the vehicle, and it will come off.Okay, now with an extra set of hands, raise the hitch up and slide it all the way back against the bulkhead, and we'll mark our holes with a paint marker. And with them marked, we'll take it down. Okay. With our holes marked, we'll now take a small drill bit and drill a pilot hole right through the middle of them. You can see where our pilot holes came up on the inside of our trunk now. It's easier to drill going down so that's what we're going to do. We'll enlarge it to the final size as indicated in the instructions. I'm using a step bit for this. Now we'll take some RTV silicone, which we have available on our website, go around the holes. This will help any exhaust fumes or moisture getting inside the vehicle. We'll take our plate, center it over the holes. We'll even put more silicone around the holes there, and we'll drop down our carriage bolts. And we'll do the same for the other side.Here's a quick tech tip for you. Before we raise the hitch into position, it's a good idea to put a heavy object over the top of your carriage bolts. This'll prevent them from being pushed back inside the vehicle when you're raising the hitch onto the bolts. Now, with an extra set of hands, we'll raise the hitch into position and push it onto our carriage bolts. And to make it easier, I just have a 17mm socket on one of the nuts right now, and I'll just get one of the nuts started to help hold it in position because we need to have a lock washer underneath the nut. Put another nut in the socket, hold a lock washer in place with my other hand, and then start the nut. Once I have that one in I can remove the nut on the other one and put the lock washer underneath.Okay, now that we have both of our nuts in place with lock washers underneath, we'll snug them down. With all of our hardware snugged down, we'll now torque it to the amount specified in the instructions. Okay, with our hitch torqued down and in place, we'll now reinstall our exhaust. We want to make sure we put all of our stuff back in place, and we're ready to hit the road.And that completes your look at, and being shown how to install, the Draw-Tite Class I Trailer Hitch Receiver, part number: 24796, on this 2017 Nissan Altima.


Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24796

Average Customer Rating:  4.9 out of 5 stars   (114 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24796
by:
2010 Nissan Altima

The trailer hook-up works great. I used it to haul a trailer from Ohio to N.M. I also used it to haul a trailer from Ohio to Florida. The hitch preformed like a dream. I have it on my 2010 Nissan Altima . 542697



- 24796
by:
2014 Nissan Altima

i looked and reviewed other hitches and settled on this hitch.ordering was so easy.My wife has a 2014 Nissan Altima. Installation was very easy.It took less than a half and hour to install the hitch.It looks great and is hardly noticeable.i would not hesitate to purchase products from etrailer again.Very satisfied,Thanks 490162



- 24796
by:
2016 Nissan Altima

I wanted to be able to tow a light trailer and this hitch receiver is just perfect for that. It's sturdy and reliable. The instructions for installing were right on. the only surprise was that I needed to borrow a pipe expander for putting the mufflers back on, but it all went very well. I'm very happy with it. 489112



- 24796
by:
2014 Nissan Altima

This is a very high quality product and well built. Installation was a challenge. I do a lot of DYI projects, but this was a challenge. You need some way to keep it place while installing it. It is very heavy. I am also not sure that removal of the heat shields is a great idea. I bent mine out of the way, but bending them back was a challenge. If you have the means to install this yourself, it is a great product, but if you don't, you may want to find someone to install it for you. I would recommend this https://www.etrailer.com/Hitch-Adapters/Brophy/HT5R.html if you want to get some height. I install this into an 2014 Altima 3.5. 502252



- 24796
by:
2015 Nissan Altima

I ordered this hitch because it said that the drawbar and pin were included in the description. When it showed up there wasn't a drawbar or pin in the box. I emailed etrailer and got a response within just a few minutes. I figured that it was going to be the usual "prove that it's missing" hassle that other stores have had me go through in the past with filing a report with the company that shipped it and endless emails that eventually lead you to give up. I was pleasantly surprised when they asked me if the box was damaged and if I was sure that the drawbar wasn't in the box then simply sent one out to replace the missing one. A few days later and the drawbar showed up in my mailbox, no hassles or any hoops to jump through. From now on, whenever I need another hitch or any other thing they have on their website this will be the place I go to. Thank you etrailer for not putting me through the ringer. 239075



- 24796
by:

The hitch was received quickly, and near perfect condition ( a bit of paint is scraped off of sharp corners). The boxes have a hard time containing a hitch, and small holes are created from handling, then paint is worn off of the portion that protrudes. A bit of touch-up & It looks very nice. Install was no problem, probably about 40 minutes total. Looks very proper . 325053


Comments

Hitch is still doing fine.

Ben A - 12/14/2017

31899

- 24796
by:

This is the third trailer hitch I have purchased from Etrailer.com. Each one has arrived in a very timely manner with no missing parts and nothing damaged. Prior to my purchases I have viewed the installation videos which were very helpful. The written installation instructions that accompanied each trailer hitch were complete and easy to understand. The wiring harnesses were a perfect match to each vehicle. 105214


Comments

The hitch and wiring harness have worked without fault. I am quite happy with the product a year later.

Mike W - 10/25/2014

7445

- 24796
by:
2011 Nissan Altima

1 year after purchase, I am mostly happy with this receiver. It was a pain to install, mainly due to the design of my 2011 Altima, but I knew that going in thanks to the instructions and videos on etrailer. My only hesitation to give it 5 stars is the surface rust inside the receiver tube. I'm not sure how, but it seems like they could figure out a way to make that look better for longer. However, the hitch has worked perfectly in the light towing (~600lb) I do. 524293


Comments

Unfortunately, due to the metal on metal contact that the finish on the interior of the receiver tube experiences, theres really not much that could be done to prevent the finish from being abraded. A thin coat of grease on the shank of the ballmount or hitch mounted accessory will be the best bet to provide some protection.

-- Mike L - 06/21/2018

40054

- 24796
by:
2013 Nissan Altima

Service from etrailer and product quality are both great! Installed easily, a perfect fit on the car, very happy. My only issue is the damage that happened in shipping. The hitch had no padding or packing materials in the box to secure the hitch inside the box. As a result it slid freely inside the box punching holes through the cardboard and chipping paint off. These impacts also loosened the parts inside scratching up the bar as seen in my pictures near where I installed the trailer light plug. A little bubble wrap, wadded paper, or foam could have prevented the damage completely. The cardboard box was not dented, other then the holes punched from the inside out by the hitch parts as they slid and slammed into the sides of the box. 66882



- 24796
by:
2015 Nissan Altima

I installed this on my 2015 Nissan Altima. I plan on pulling my jetski with it. So far everything looks great. The hitch is great quality. 419921



- 24796
by:

Ian was professional & efficient in making sure I received exactly what I needed! Very personal service. Thank you Ian! 639325



- 24796
by:
2007 Nissan Altima

Purchased hitch for bike carrier in my 2007 Nissan Altima. Quality of hitch is great. Installation was a snap. Instructions were spot on !!! 638431



- 24796
by:

Etrailer provided the right hitch for my car. They promptly filled and shipped the order. The hitch is still doing the job. Thank you. 634440



- 24796
by:
2017 Nissan Maxima

Hitch was easy to install, looks and works great. Great way to add some carrying capacity to my 2017 Nissan Maxima. 634304



- 24796
by:

Perfect fit, but recommend having a mechanic for a good friend to install. Used for 3,500 miles on a long road trip. It's solid, no worries. 629043



- 24796
by:

The hitch does what it is made to do. I use it for a bike rack. 628712



- 24796
by:
2014 Dodge Durango

Product was as described. I had it installed on a 2014 Maxima at a body shop for about one hour of work. Works well except it is tougher to access the hitch pin than my Durango. Not surprising though considering the difference in the vehicles. Switched to a socket to tighten my Thule bike rack hitch pin. Well worth the money. 628667



- 24796
by:

Fit perfectly. Not very difficult to install. I've used it several times and have had no issue. Great deal for the price. 617272



- 24796
by:
2016 Nissan Altima

Great product! 597661



- 24796
by:
2016 Nissan Altima

Super easy to install. Less than one hour. Almost don't know that it's there on my 2016 Altima SR.I would highly recommend this hitch. Thanks guys 595161



- 24796
by:

After having this installed on my car for a year, I would recommend buying a class 2, instead of a class 1. Class 2 accessories are less expensive and easier to find. I have not had any other issues with this. 593198



- 24796
by:

Easy install. Great video tutorial. 593030



- 24796
by:
2012 Nissan Altima

The hitch fit my 2012 Altima perfectly and was a breeze to install on my own. It works great with my bikerack. The only issue I had was removing my muflers at the clamps which were rusted tight. I ended up taking the car to a shop to heat and remove them for me. I wasn’t able to heat them enough outside when it was windy and below freezing. 585279



- 24796
by:
2011 Nissan Altima

Easy to order and fast delivery 579317



- 24796
by:

Excellent experience from ordering thru support it's been a refreshing experience. 569761



- 24796
by:

Recieved ahead of schedule, installed as the video showed. Just as I expected. Thank you 568975



- 24796
by:

FIT GREAT AND SUPER EASY TO INSTALL 562497



- 24796
by:
2018 Nissan Altima

Fast Delivery excellent service 562190



- 24796
by:
2005 Ford Van

I installed the draw tite hitch on my 2015 Nissan Altama. Installation was fairly simple. You do have to remove both mufflers, I also removed the muffler heat shields. The instructions say to carefully bend them out of the way but for me drilling out the rivets and removing them made installation easier. I did reinstall them with rivets I had. Also when I got the hitch it was missing the steel plates that go in the trunk one call to customer service and the parts where expedited to me. Very happy with product and e-trailers customer service. 520828



- 24796
by:
2017 Nissan Altima

Easy install. Took about an hour if you are mechanically inclined. A small floor jack is your best bet for the install. It will hold the rack in place while you mark the holes and install. 510239



- 24796
by:
2012 Nissan Altima

Hi there people. I don't usually write reviews but I felt they deserved one. I ordered a 1 1/4 hitch for my car.. I wasn't very hopefull this transaction would go smoothly. Most of the time it's a pain in the ass. I am happy to say it was one of the best customer service I have had in a long time. They followed up with me until I received the hitch. I have already told my family/friends about my wonderful experience. I will always tell people about how awesome I was treated. I am a very hard person to please. So they made a break through with me. Until next time...... 487446



- 24796
by:
2010 Nissan Maxima

After a year on my 2010 Nissan Maxima, my hitch is still one of the best modifications. It has allowed me to safely trailer my Sportbike on several occasions. The hitch has also let me use my car to transport a small trailer and pick up a living room table and chairs that I found online. Definitely glad I got it. 482802


Comments

Still Great

Drew - 03/09/2019

50345

- 24796
by:

Excellent product. Was a perfect fit for my auto. Was very easy to install. The on line videos provided excellent instructions which facilitated the install. Electric cabling was easy to install and worked perfect very first time. Once again the on line videos had perfect install step by step process. Have used the devices to haul my trailer across the US twice and never had any issue or safety concerns with the product. 475211



- 24796
by:
2015 Nissan Altima

Perfect fit I Installed it in 40 min utes 463636



- 24796
by:
2016 Nissan Altima

Great. Installation was a little difficult but fits the rack I bought perfectly. 446781



- 24796
by:

I very happy with etrailer service, theu were fast on delivering my order Thank you 446275


Comments

Im very happy with this mechanical product no rust or corrosion

Rudy - 10/26/2018

45095

- 24796
by:

FAST GREAT SERVICE. THANK YOU SO MUCH!! !!!!!!!!!!!!!!!! 421551



- 24796
by:
2014 Nissan Altima

Excellent hitch receiver fit and function for 2014 Nissan Altima. Very solid. Chose this unit because it does not require a support strap when using a bike rack. They are not kidding with 9/10 for installation difficulty. This due to vehicle design, not product. Both mufflers need to be removed (remove and replace took the longest time). Deep socket is required for muffler removal and at least 10" ratchet extension required to tighten nuts to secure product. Estimated time is accurate at about 90 minutes. 413879



- 24796
by:
2016 Nissan Altima

A good product! This is the second hitch I have installed using etrailer and it went as well as the first. Not being a super skilled Tech it took longer than expected, but for me it was a project that needed to be done, and I enjoy a good project when it comes together, no matter if it took a little longer due to an average person's tool inventory and simple jack stands and floor jacks. The instruction videos are the best I have seen as of yet. If you enjoy working with your hands, I recommend etrailer products! 412852



- 24796
by:

Excellent 407470



- 24796
by:

Extremely pleased with this purchase and the product. Delivery was quick and everything was of high quality. Installation instructions were easy to understand. I would definitely purchase product from etrailer again! 400638



- 24796
by:

The hitch is perfect for pulling a small utility trailer. I used it the first weekend to dispose of 4 loads of tree trimmings. It was easy to install for a DIY person. 386381



- 24796
by:

The trailer hitch I ordered for my grandson's car arrived sooner than expected and was exactly what I needed. Doing business with etrailer was pleasant, service was fast and courteous and I will do it again when needed. 385341



- 24796
by:
Nissan Maxima

The hitch came very quickly. I ended up having a mechanic install it. It works great on my Maxima, I had it installed to mainly carry my bikes around. 383306



- 24796
by:
2016 Nissan Altima

Nice fit. Easy too install. Good instructions. Work's Great! Bill K. 383091



- 24796
by:
2014 Nissan Altima

The product felt very solid, installation with instruction video made installing trailer hitch a breeze. Plan on towing a canoe/kayak trailer to hitch, haven't tow anything on hitch yet, but don't expect any complication. Very satisfied with whole process, as of now no complaints. 378095



- 24796
by:
2011 Nissan Altima

Love the hitch. I use it for my bike rack since I don't want a roof rack. I don't have to worry about scratching the paint of my car. Since the car is low it does scrape coming out of dive ways if it's to steep. 372416


Comments

Still working as expected. A plus!

Gustavo A - 04/26/2018

37752

- 24796
by:

fast shipping; good packing, strong hich,thank you 362424



- 24796
by:
2013 Nissan Altima

Hitch fit my 2013 Altima GREAT !! Would rate this seller 5 STARS. Fast shipping. 355862



- 24796
by:
2009 Nissan Altima

Fits great 345627


58
122
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?


  • Cargo Transport Options for 2018 Nissan Altima with Moon Roof
  • If maximum cargo weight capacity is the goal then the way to go is to install a hitch # 24796 and to use a hitch-mount cargo carrier like one of those shown on the linked page, such as # C18110. The Class I hitch above has a 200-lb tongue weight rating, tongue weight being downward force on the hitch. So in actual pounds, this means that once you deduct the carrier's own 30-lb weight from that hitch capacity you still end up with a 170-pound maximum cargo weight. This is far more than your...
    view full answer...

  • Comparing Draw-Tite and Curt Trailer Hitches for a 2013 Nissan Altima Sedan
  • As far as quality, all of the hitches for the 2013 Nissan Altima sedan are on par with each other. The Draw-Tite hitches (# 24796) undergoes additional voluntary testing procedures that other hitches do not. But both hitches, including Curt hitch # 11352, are built to meet or exceed required industry strength standards. The main difference is that the Curt hitch requires the use of a stabilization strap, # 18050, for any non-trailer load such as a bike rack or cargo carrier. Curt requires...
    view full answer...

  • Trailer Hitch Recommendation for a 2014 Chevy Malibu LTZ
  • I checked with Curt, the manufacturer of trailer hitch # C12115 and they list the hitch as a fit for all models of the 2014 Chevy Malibu so that would include the LTZ trim. I have linked the instructions below and a video showing an example installation for you. Other sites don't have human-power to keep up fit information like we do. Or they are caught up on the fact that the available hitches exclude Canadian models and not US models. The recommended ball mount with the hitch is #...
    view full answer...

  • Trailer Hitch and 1-1/4 to 2 Inch Adapter for a 2016 Nissan Altima
  • For the 2016 Nissan Altima there are only Class I hitches with 1-1/4 inch receivers such as # 24796 (which I recommend over the Curt hitch because Curt requires a stabilization strap # 18050 when using the hitch for a bike rack or cargo carrier and Draw-Tite does not). In order to use a 2 inch accessory with a Class I hitch you will need adapter # HTAD which is compatible with a Class I hitch. Keep in mind that the use of an adapter reduces the tongue weight capacity of the trailer...
    view full answer...

  • Recommendation for a Trailer Hitch for a 2015 Nissan Altima
  • I have a trailer hitch that will fit your 2015 Nissan Altima. I recommend the Draw-Tite Sport Frame Hitch # 24796. The Draw-Tite hitch is custom-fit for your Altima like the other brands hitches we carry, but the Draw-Tite hitch will not need the extra stabilization strap the other hitches require when using a non-tow-able accessory, like a bike rack. The Draw-Tite hitch is a Class I hitch with a 1-1/4 inch receiver opening. Unfortunately, there are no 2 inch trailer hitches available...
    view full answer...

  • Trailer Hitch for a 2017 Nissan Altima Sedan
  • For your 2017 Nissan Altima sedan you can use Draw-Tite trailer hitch # 24796. This is a Class I trailer hitch with a 1-1/4 inch receiver. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. I have linked the Class I compatible 2-bike racks and cargo carriers for you. If you want to tow...
    view full answer...

  • Do I Need To Remove Exhaust Heat Shields To Install CURT Trailer Hitch # 11352 On 2010 Nissan Altima
  • I do have some hitch options available for your 2010 Nissan Altima that do not require the removal of the heat shields, but the CURT trailer hitch # 11352, does require the heat shields to be removed. The Draw-Tite hitch # 24796 will allow you to retain the heat shields on your 2010 Nissan Altima. It is a Class I 1-1/4 model, and is has the same tongue weight and towing capacity of the CURT hitch # 11352 that you selected. To complete your towing setup, you will need the following...
    view full answer...

  • Can Trailer Hitch Installed on 2013 Nissan Altima Handle Mobility Scooter + Carrier Weighing 300 lbs
  • A Nissan Altima is compatible with a Class I hitch, which has a maximum tongue weight capacity of 200 lbs. The 300 lb chair and lift you mention would seriously overload the hitch, which would damage the hitch and result in the loss of the carrier and the power chair during transport, which would be bad. Your best bet would be to use a different tow vehicle, one that's capable of using a Class III hitch that has a tongue weight capacity of at least 350 lbs. A small trailer like part...
    view full answer...

  • Suggestions for the Best Hitch To Carry 2 Bikes on a 2009 Nissan Altima Hybrid Sedan
  • I recommend using the Curt Class I Trailer Hitch, item # 11352, over the Draw-Tite Class I Sportframe Trailer Hitch, item # 24796, on the 2009 Nissan Altima Hybrid, because the Curt hitch uses existing holes in the vehicles frame rail to install the hitch and does not require drilling into the bottom of the vehicles trunk pan. With the Curt hitch, drilling is required but you do not have to drill into the inside of the vehicle trunk which would leave the potential for water to enter into...
    view full answer...

  • Available Hitches and Towing Capacity for 2009 Nissan Maxima
  • The Hidden Hitch # 60873 (no longer available) and the Draw-Tite # 24796 are identical. They are both manufactured by the same parent company, Cequent Performance Products. Their weight bearing capabilities and installation procedure are identical. For towing, you would also need a ball mount, trailer connector, part # 118470 and a 1-7/8 inch ( # 19256) or 2 inch ( # 19258) trailer ball. According to my research, the 2009 Maxima has a rather modest 1000 lb towing/100 lb tongue weight...
    view full answer...

  • Will Curt Class II Ball Mount Fit into Draw-Tite Class I Trailer Hitch Receiver
  • I just went out to our warehouse and installed the Curt Class II Ball Mount # C45015 into the Draw-Tite Trailer Hitch Receiver # 24796 and it fit perfectly. The Curt is 11-5/8 inches from the hitch pin hole to the hitch ball hole so it will work great for you. For a 2 inch hitch ball use # 19258 and for a 1-7/8 inch ball use # 19256. Then for a pin and clip use # F-4.
    view full answer...

  • Hitch System to Haul a 250 Pound Motorcycle With a 2010 Nissan Altima
  • The only class of hitch available for a 2010 Nissan Altima is a Class I hitch like the Draw-Tite, # 24796. Class I hitches have a 1-1/4 inch receiver opening and a 200 pound or less tongue weight capacity. After checking the owner's manual for the 2010, it gives a tongue weight capacity of 100 pounds. You will always want to follow the weight limitations of the component with the lowest weight rating. Towing capacity of a vehicle is determined by many factors including frame structure,...
    view full answer...

  • Recommended Trailer Hitch And Platform Bike Carrier For 2015 Nissan Altima
  • The trailer hitch I recommend for your 2015 Altima is the Draw-Tite Sportframe Trailer Hitch Receiver, part # 24796. I recommend this hitch because the Curt Trailer Hitch, part # C11352 requires the use of a safety strap like part # 18050 when it is used with any non-trailer accessories. Many times it can be tough to find a place to attach the safety strap. I have attached a link to an installation video for the # 24796 you can check out. As shown in the video the distance from the center...
    view full answer...

  • Trailer Hitch Recommendation for a 2014 Nissan Maxima
  • It looks like you are going to be drilling no matter which hitch you use. The Curt hitch, # C11352, attaches more to the frame which is why it requires removal of the heat shields. The hitch itself will act as a heat shield to dissipate heat. The Draw-Tite hitch # 24796 does mount to the sturdier part of the spare tire well which requires drilling (which will be pretty easy to drill through, unlike a solid frame) but retains the heat shields. I have linked videos showing installations...
    view full answer...

  • Trailer Hitch for a 2008 Nissan Altima
  • Curt trailer hitch # C11357 is designed to fit the 2008 to 2013 Nissan Altima Coupe (2-door models). If you have a sedan (4-door) then I recommend hitch # 24796. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. If you go with a Curt hitch then Curt also says you have to use stabilization...
    view full answer...

  • Recommend Draw-Tite Hitch For 2008 Nissan Altima Coupe
  • I do have a hitch that will fit your 2008 Nissan Altima Coupe, but the hitch you selected, Draw-Tite Trailer Hitch # 24796, will not fit as it is designed for the Sedan model of the Altima. For your Altima Coupe, you will need the Draw-Tite Trailer Hitch, part # 24801, which is also a Class I 1-1/4 inch hitch. To complete your towing setup, you may be interested in the following items: Curt Wiring, part # 56022 Draw-Tite Ball Mount, part # 3594 1-7/8 Inch Hitch Ball, part # 19256 Pin...
    view full answer...

  • Installing Draw-Tite Trailer Hitch # 24796 on 2018 Nissan Altima
  • The Draw-Tite Class I Sport Frame Receiver Hitch # 24796 referenced in your question is confirmed to fit your 2018 Nissan Altima. For both this hitch and the Curt model that is also confirmed to fit, the installation process is relatively extensive. Installation will require that two 7/16 inch holes be drilled into the frame on each side of the vehicle (4 holes total). The muffler will also need to be temporarily removed but it will be re-installed once the hitch is in place. I have...
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Video Edited:
Zack K
Video Edited:
Andrew K
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Expert Research:
Adam R
Video Edited:
Kathleen M
Updated by:
Laura H
Video Edited:
Dustin K
Expert Research:
Jeffrey L
Video Edited:
Sue W
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Joe B
Photos by:
Zach O
Updated by:
Sarah W
Test Fit:
Jared G
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Test Fit:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924