Mounting Flange Dimensions for Curt XD Class V Hitch # C15324

Question

Question:

I would like to know the width in inches of the bolt flange of the hitch. Just need the width of where the hitch bolts to the frame. Thanks for your help.

asked by: Paul

0

Expert Reply:

The Curt XD Class V Hitch # C15324 that you referenced is indeed a correct fit for your 2006 Chevrolet Avalanche.

I visited our warehouse to obtain the measurements you requested. The hitch mounting flanges measure 10-11/16-inches long x 2-1/4-inches wide; this width measurement includes the radius of the bend in the flange. The mounting hole spacing is 2-1/2-inches between the near holes and 4-1/8-inches between the farther-spaced holes, all measured hole-center to hole-center.

Please refer to the linked photo.

At right I have linked you to our pages for Class V ball mounts and hitch balls.

expert reply by: Adam R

0

click to enlarge

Answer 1

I went out to the warehouse and pulled Curt Class V Trailer Hitch #C15300 and took some measurements for you. From the front bolt hole to the rivet (center to center) is 1-5/16 inches. From the rivet to the rear bolt hole is 7-7/8 inches and the…

view full answer...

Answer 2

I went out to the warehouse and measured the CURT Trailer Hitch, #14301. Starting with the front to back measurements of the holes on the same side, from the first hole, nearest the back of the vehicle to the center hole measures 6-1/2 inches on…

view full answer...

Answer 3

Hello Joe. To install the CURT Trailer Hitch, #C15445, on a 2011 Ford F-350 Cab and Chassis only model, you will need to drill two holes in the frame using a 9/16 inch drill bit. These holes are for the forward most attachment points on the vehicle.…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C15320 is 40-1/4" across and from the top to the top of the crosstube measures 1-15/16". This hitch is only a fit for certain model year Chevy Express and GMC Savana cargo and passenger vans.

view full answer...

Answer 5

Thanks for reaching out, Andrew! The best solution for adding a hitch to your bus is the Curt Class 5 Universal Weld-on Hitch w/ Brackets #C99CR since there aren't any custom options for your bus. Since this is a weld-on installation you'll…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Mounting Flange Dimensions for Curt XD Class V Hitch # C15324

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching