Dimensions of the Replacement Wheel Strap # 853-7002

Question

Question:

Can you tell me the dimensions of this strap... Length and width?

asked by: Chuck

1

Helpful Expert Reply:

I pulled the Replacement Wheel Strap # 853-7002 from our warehouse and found that it is 11-1/2 inches long by 13/16 of an inch thick.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Replacement Fat Tire Rear Wheel Holder & Strap - Thule T1 or T2 Classic Platform Bike Racks - Qty 1 #7521568001 will work with your Sportworks 2 bike rack. If you're only wanting the strap alone The Replacement Fat Tire Wheel Strap for…

view full answer...

Answer 2

Thanks for getting me the pictures of your Thule T2! From that I can tell you have the T2 Classic like #TH9044 and the correct wheel holder would be the part #7521568001. This would also work on the #TH9044-TH9046.

view full answer...

Answer 3

Since the #7521682001 that you referenced is too big for your Thule T2 bike rack most likely that means you have the Thule T2 Classic instead and the correct holder you'd need is the #7521568001 which fits a smaller beam size. The T2 Classic…

view full answer...

Answer 4

Hello Bobby, thanks for reaching out. The Replacement Wheel Holder #7521568001 is made for the Thule T1 and T2 Classic, so I cannot say with certainty that it will work with your SportRack bike rack. Thule used to make the SportRack racks back in the…

view full answer...

Answer 5

I am not familiar with the Sports Works bike racks, but I recommend measuring your wheel strap to see if the Thule Replacement Wheel Strap #853-7002 has matching dimensions. The Replacement Strap #853-7002 is 11-1/2 inches long by 13/16 inch wide. I…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Dimensions of the Replacement Wheel Strap # 853-7002

Product Page this Question was Asked From

Continue Researching