Replacement 7-Way and Wiring Harness Recommendation for a 2000 Ford F-150
Updated 08/12/2014 | Published 08/11/2014
Products Featured in This Question
Question:
I have a 2000 F150 2wd with the factory 7 way connector. My wiring harness from the factory is old and the wires are pulling out of the connector blue part in the pictures. Looking at the pictures, this is what I would need to replace that harness, but I also know that it says will not work with factory 7 way connectorinch so I wasnt sure if there is a different part I could buy to replace that. I basically need the harness that plugs into the back of the 7 way connector and goes to the vehicle. I hope this makes sense. Ive included the picture of the harness so you can see what it looks like. Thanks so much for your help!
asked by: Tom H
Expert Reply:
We had a customer with a similar problem and they were able to use the Curt Wiring harness part # C55242 and it worked just fine.
Product Page this Question was Asked From
Ford Replacement OEM Tow Package Wiring Harness, 7-Way
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- Factory Tow Package
- 7 Blade
- Plug and Lead
- Plug-In
- Visible
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: All About the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package
- Shop: Ford Replacement OEM Tow Package Wiring Harness, 7-Way
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Shop: Curt Trailer Breakaway Kit with Trickle Charger, LED Tester, and 5 Ah Lead Acid Battery - Side Load
- Video: The Low-Down on the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package
- Search Results: 1~7/8
- Search Results: breakaway
- Search Results: breakaway kit
- Q&A: Converting 4/6-Way Factory Connector on 1999 Ford F-350 SD to a 7-Way RV-Style Connector
- Q&A: 7-Way Wiring Harness for 2001 Ford Expedition
- Q&A: Installing a 7-Way Trailer Connector on a 2001 Ford F-150
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Video: Curt Push-To-Test Trailer Breakaway Kit Installation - 2017 Grand Design Solitude Fifth Wheel
- Video: Checking Out the 7-Way Molded Trailer End with 6' Cable
- Video: Detailed Breakdown of the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector
- Q&A: How to Add a 7-Way and Brake Controller to a 2008 Ford E-450
- Q&A: Wiring Needed To Tow a Trailer With Brakes With a 2025 Ford Ranger no Tow Package
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Determining Trailer Tongue Weight
- Article: Holiday 2025 | Best Gifts for Towers
- Q&A: Will the Curt T-Connector Wiring for a 2024 Ford Ranger Work Without OEM Tow Package?