bing tracking image
Q & A Icon

How to Wire a Two-Wire Amber Side Marker Light on a Trailer  

Updated 10/09/2026 | Published 09/29/2026

Question:

Hi, I am replacing an amber side marker light on an enclosed tear trailer frame, i.e. the lone brown wire coming from the trailer is all the electrical I have to work with. This lamp has 2 black wires . On my first install, with trailer attached the light does not work. What do I need to do to get this working? I admit I’m not savvy to trailer electrical. Where does the second black wires go? Thanks.

0

Expert Reply:

Hi Todd, great question!

The Optronics amber side marker light, part # MC44AB has a two-wire design, with one wire for power and the other for ground. Since you only have one brown wire coming from your trailer, that wire will connect to one of the black wires on the new light to provide power. The other black wire needs to be grounded to a clean, bare metal surface on your trailer's frame. It sounds like your existing lights may ground through their mounting hardware, but this particular light needs a separate ground connection through its second wire. You can use either black wire for power or ground, as the wires are interchangeable. Once you have both connections made, the light should work when your trailer's running lights are on.

Do you have a good bare metal mounting point nearby where you can attach the ground wire?

expert reply by:
0
Heather A
Gilbert G. profile picture

Gilbert G.

10/3/2026

Had good luck replacing the cab over lights with these marker lights which are basically the same. To Todd S if you're lights are mounted on metal grounded surface you can attach your ground wire inside your light to a mounting screw.

Heather A. profile picture
Etrailer Expert

Heather A.

10/3/2026

@GilbertG Thanks for joining the conversation Gilbert! That's great advice.
Todd S. profile picture

Todd S.

10/9/2026

@HeatherA, Thank you for your response. I followed your advice as well as Gilberts, and was successful in drawing light from the marker light. I wound the loose wire round the self tapping screw to ground the connection. Success! Quality product.
Heather A. profile picture
Etrailer Expert

Heather A.

10/9/2026

@ToddS Awesome Todd, it sounds like it worked out well for you! Did you say you have a teardrop camper?

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>