Replacement Bearing Kit For A 4K Lippert Axle On A 2024 Grand Design Imagine 2600RB
Updated 09/17/2026 | Published 09/08/2026 >
Products Featured in This Question
Question:
Lippert 4000 lb axle SerSO11018463 4000 10/17/23 Looking for bearing kit for 2024 Grand Design Imagine 2600RB. I don’t see a 4000 lb axle on your list.
asked by: Steve R
Expert Reply:
Hi Steve!
Sorry for the delay, but I do have what you are looking for now! (it took a little figuring out)
The Lippert Complete Bearing Kit for 6,000-lb Trailer Axles - 15123/25580 Bearings, 15245/25520 Races # LC35ZP is going to be a direct replacement for your hubs. It includes the inner and outer bearings, inner and outer races, the seal, a tang washer, and a cotter pin. It's an all in one kit for one hub, so if you are doing multiple hubs, you will need to order this in the quantity of hubs you are doing (I think that made sense).
One thing, you will notice this says it's for a 6K axle. Don't worry about that. The 5,200 to 7,000 pound axles are all basically the exact same size (with a little variation from time to time). Lippert has been capping some of their axles at lower rates than they would typically be rated to lately, and I'm not 100% sure why. So even though this kit is rated higher, it will fit your 4K axle perfectly.
With all that being said, if you just wanted the inner/outer bearings and the seal, I do have those linked below:
Outer Bearing # 15123
Inner Bearing # 25580
Seal # GS-2250DL
And nice camper! What has been your favorite place to take it so far?
Product Page this Question was Asked From
Lippert Complete Bearing Kit for 6,000-lb Trailer Axles - 15123/25580 Bearings, 15245/25520 Races
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- Lippert
more information >
Continue Researching
- Q&A: Replacement Bearing Kit for a 6,000 lbs Hub w/a 2.25" Grease Seal
- Q&A: Bearing Kit Recommendation for 2025 Grand Design 27BH with 5,100 lb Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Disc Brakes for Trailer With Dexter Disc Brakes
- Q&A: Replacing a Magnum MS2812 With a Victron MultiPlus II or Quattro II Inverter Charger
- Q&A: Can Grease Be Cleaned Off Of A Brake Magnet And Brake Assembly?
- Q&A: Spindle Nut Recommendation for Trailer with 6k Axle
- Q&A: Which Bearing Kit for Dexter Axle 9747800
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle

