Axle Options For A Light Weight And High Speed Trailer
Updated 08/28/2026 | Published 08/21/2026
Products Featured in This Question
Question:
Does E-trailer have something like this for 70mph rating that weighs allot less that I could use for a motorcycle cargo trailer? I only need 400lb capacity and 4 lug wheels., trailer frame is aluminum channel 40 wide out to out CE Smith Trailer Axles - CES84XR Highlights 1,800-lb Weight Capacity: Handles small to midsize trailers for confident hauling. 49-1/2 Hub Face x 38-7/16 Spring Centers: Matches common small-trailer dimensions. 54 Overall Beam Length: Sized for a 40 frame for proper alignment and tracking. 5 on 4-1/2 Studded Hubs: Fits the most common trailer wheel pattern. 1-1/2 Square Axle Beam: Adds strength and acts as part of the suspension system. Pre-Greased Hubs with Bearings and Seals: Ready to mount for smooth, corrosion-resistant use.
asked by: Michael B
Expert Reply:
Hi Michael!
While I do have a potential alternative, the CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K # CES84XR is going to be our smallest and lightest option for a full axle. With that said, check out the following two parts:
TruRyde Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide # TRU97FR
etrailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased # AKIHUB-440-2-1K
This is just a spindle, but it could be made into a full length and light weight axle pretty easily. The "stub" measures 1-1/2" wide by 3-1/2" long and could either be welded to a frame, or you could find a square tube that it will fit inside of and then weld them to that. It would be a little bit of work, but it's definitely an option. And with the correct tire/wheel combo, you can get this set up going up to 87 mph (with the Kenda 205/65-10 # AM3H460).
What are you typically carrying on the trailer? Or are you carrying the motorcycle on the trailer?
Jon P.
8/27/2026
I used this CE Smith axle for a quick repair to a small boat trailer while traveling. Hub bearing went bad and it was an odd, smaller size so parts/hubs weren't easily available. I ordered the axle and quickly bolted it to trailer C channel frame. It is galvanized steel but axle is not very heavy..
Eric
8/28/2026
Hi Michael, As Lazer S suggested, the full axle may be a bit long for your application. I used it as a replacement axle for a boat trailer. I'm guessing boat and trailer combined weigh 600 - 700 lbs. After towing at 65-70 mph the hubs felt warm, not hot. I've only had the axle for about a month. I haven't added any grease. Nor have I driven very far. Again as Lazer S suggested, you speed limit may have more to do with the tires than with the axle/bearings. Good luck. Eric
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 38-1/2 Inch Spring Center
- 49-1/2 Inch Hub Face
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Q&A: Recommended SnapPad Jack Pads for a HWH Leveling System on a Motorhome
- Q&A: Recommended Class IV Hitch for a 2012 Chevrolet Silverado 1500
- Search Results: hitch receiver
- Shop: Trailer Hitch
- Shop: etrailer Electric Trailer Jack w/ Tongue Weight Scale - 7-Way - 18" Lift - 5,000 lbs
- Search Results: 14301
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: rv jack pads
- Shop: SnapPad HiWay 8 Jack Pads for HWH Leveling Systems w/ 8" Round Jack Feet - Qty 4
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: SnapPad HiWay Plus Jack Pads for HWH Leveling Systems w/ 8" Round and 10" Round Jack Feet
- Video: Choosing the Right Vehicle Suspension Upgrades
- Q&A: Length of Replacement Travel Cover Zipper for Thule Ayer Rooftop Tent
- Search Results: thule replacement
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Q&A: Replacement Screen Frame and Interior Trim for a VD0433 Roof Vent
- Shop: Suspension Enhancement
- Q&A: Do You Have a Replacement Cover for a Thule Tepui Ruggedized Autana 3 Tent?
- Shop: Replacement Zipper Assembly for Thule Tepui Explorer Autana 4-Person Rooftop Tent
- Video: Installing the Curt Trailer Hitch Receiver on your 2012 Chevrolet Silverado
- Video: Complete Breakdown of the Double RV Waste Valves
- Video: All You Need to Know About the Double RV Waste Valves
- Video: Review of Thule Replacement Zipper Assembly Tepui Explorer Autana 4 Person Tent - TH42CK
- Video: Comprehensive Review: Electric Trailer Brake Assembly
- Q&A: Differences Between The Valterra Double Waste Valve # T18, # T18A, And # T18C
- Q&A: How to Choose Correct Valterra Double RV Waste Valves Replacement
- Video: Complete Breakdown of the Valterra Waste Valve Body w/ Flexible Cable for RV Gray Water Tank
- Shop: Vehicle Tow Bar Brake System
- Search Results: even brake parts
- Search Results: trailer hitch
on Trailer Axles
Skip L.
8/27/2026
Michael, I mounted a rooftop camper, SylvanSport Loft, on a utility trailer. On top of the closed loft I carry a kayak. My goal was to upgrade to larger tires rated for highway speeds. Needed the new axle to gain clearance for the tires. The total weight is less than 500#.