How Much Does BulletProof Hitches Aluminum Adjustable 2-Ball Mount Weigh

Question

Question:

what is the weight of the product itself for Part Number: BPH47MR.

asked by: Ryan G

0

Expert Reply:

Hey Ryan! The BulletProof Hitches Aluminum Adjustable 2-Ball Mount # BPH47MR weighs 18 lbs. It has a 6061 T6 grade aluminum construction with a max rise/drop of 6".

What kind of trailer are you towing?

expert reply by: Robin H

0

BulletProof Hitches Aluminum Adjustable 2-Ball Mount
(click to enlarge)

Nice C.

8/4/2026

Hey Ryan, I am not sure about the weight but that actually has been answered. The hitch is great quality and pulls a 10K horse trailer without an issue. The only thing I would add is that it doesn't stow easily. I also have a B&W stow and go on our dually and I like that concept better. I take the bullet proof off when not in use on the F150 but the B&W is always on the F450 and that is a nice option. Is the Bullet Proof a nice hitch, absolutely.

Robin H.

8/4/2026

@NiceC thanks for sharing your experience! The B&W Tow & Stow is tough to beat, especially if you leave it installed all the time. Glad to hear the BulletProof has been working well for your horse trailer.

Jim P.

8/11/2026

I have a 2014 Ram 3500. The factory reducer insert had a lip that prevented the shank from going in to the second pin hole. To remedy the problem I purchased a reducer without a lip. The shank just makes it to the pin hole. The shank needs to be about 2 inches longer with the pin holes forward an inch. This would work out for Ram owners.

Robin H.

8/12/2026

@JimP thanks for that feedback! Using a reducer sleeve without the lip is a good workaround as long as you're able to fully align the hitch pin holes and securely install the hitch pin.

Answer 1

Hey David! The TowSmart Adjustable 2-Ball Mount #TS89VR cannot be flipped around and stored under your truck. The back of the shank/mount sticks out so you wouldn't be able to mount the ball platform on the other side. See the attached picture.…

view full answer...

Answer 2

for your 2013 Ford F-150 the TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers #TLF1005H will partner with the factory hitch on your truck. It is designed for 6-1/2 foot bed trucks which is what it…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

How Much Does BulletProof Hitches Aluminum Adjustable 2-Ball Mount Weigh

Product Page this Question was Asked From

Continue Researching