Video Transcript for Review of BulletProof Hitches Trailer Hitch Ball Mount - Aluminum 2 Ball 2 Inch - BPH47MR

Hi everybody, Andy here with etrailer.com. Let's take a real quick look together at this Bulletproof Hitches Aluminum Adjustable Two-Ball Mount for your two-inch hitch receiver. This adjustable ball mount is going to slide into your two-inch hitch receiver on your vehicle, and it's gonna let you tow up to 10,000 pounds with the two inch ball or up to 14,000 pounds with the 2 5/16 inch hitch ball, the tongue weight is gonna be up to 2,000 pounds, and this can be used in a six inch drop or rise position. So the adjustable height is going to let you tow trailers of different heights with the same vehicle. You're just going to slide this ball platform up and down along the shank and secure it in place with the included pins and clips. And let me go ahead and give you a brief demonstration of that.

So I do have this set currently on my 2 5/16 inch hitch ball. So I'm just gonna go ahead and remove the clips here, like so. Turn this around, and remove the pins. And then that's going to give me the ability to slide this up and down along the shank. And as you can see, it slides very easily.

And then if I want to use this in the rise position, I'm just gonna turn that the other way. And then as you can see, pop it back into the channel. And I can do that adjustment in whatever way I need it. So I'm gonna put this back in the drop position, turn this to my two-inch ball, and slide this back into the shank here, line that up there so it's somewhat even. And go ahead and replace my pins.

And what I really like about this is you're not gonna be struggling at the back of your vehicle to get the drop or the rise or the adjustment that you need or get the ball size that you need. Everything is going to be very easy to adjust, and in a matter of minutes, if not seconds, you're going to have the adjustment that you are going to need. So very easily done. Again, this is going to give you that maximum drop or rise of about six inches, it adjusts in one inch increments. And then these two different size balls are polished steel.

So again, two-inch, 2 5/16 inch, very simple to change the ball size when needed. And this is lightweight, but yet it's high-strength aluminum. So this is gonna hold up really well for you. It's gonna be very durable. It's a Bulletproof Hitch product, and they're known for making quality products that's going to endure. So this is no exception to that. And just to give you some measurements that might prove helpful for you, let me go ahead and turn this in that direction here. And I'm gonna line up my ruler and give you the measurement, first of all, from the center of what I'm calling our first hitch pin hole to the center of the ball. So lining that up there as best as I can, as I hope you can see, we're sitting right about eight inches on center. Moving to the center of that second hitch pin hole to the center of the ball, we're at about 9 1/4 inches. And then another measurement that might be helpful for you is measuring from the center of our second hitch pin hole to the end of the shank. So lining that up, we're sitting at about one and. About 1 3/8 inches or so, 1 3/8, 1 1/2 inches. So that kind of gives you an idea of the clearance that you're going to have I hope. The hitch pin hole diameter is 5/8 of an inch. And I do wanna point out that a hitch pin and clip or hitch lock for securing this to your two-inch hitch receiver are not included with this. Those items are sold separately, so if you don't already have something compatible, you would have to pick something like that up. However, I would recommend taking a look at our hitch lock options here at etrailer.com to make sure that you're securing this investment that you're making to the back of your vehicle and you're not gonna have to worry about someone coming by and yanking this off of your vehicle while it's unattended. This does have a lifetime warranty from Bulletproof Hitches. And I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.