bing tracking image
  1. Trailer Hitch
  2. TorkLift
  3. 2 Inch Hitch
  4. 2-1/2 Inch Hitch
  5. Class V
  6. 20000 lbs GTW
THIS ITEM IS NOT A FIT FOR
2002 Chrysler Sebring
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift

TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"

Part Number: TLF1008-30
In Stock
$1,125.29
Trailer Hitch
Not Confirmed to Fit

2002 Chrysler Sebring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled to accept camper tie-downs. Great Prices for the best trailer hitch from TorkLift. TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" part number TLF1008-30 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (68)
  • Q & A (0)
  • Photos

TorkLift Trailer Hitch - TLF1008-30

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Dual 2-1/2" & 2" Receivers: Tow a trailer and carry a rack or cargo carrier at once
  • Handles up to 30,000 lbs (GTW): Heavy-duty towing with TorkLift weight distribution system
  • Supports up to 3,000 lbs (TW): Safely carries large loads and tongue weights when distributed
  • Bolt-On Installation: Mounts securely without welding for easier DIY setup
  • Reinforced Steel Build: Dual-shield welds and hardened pin holes boost long-term strength
Made in USA

Features to know about

Tow Heavy and Carry More at the Same Time: Dual 2-1/2" and 2" Receivers

This hitch gives you two stacked receivers so you can tow your trailer and still use a hitch-mounted accessory. The top receiver is 2-1/2" x 2-1/2" for heavy-duty towing, and the bottom is a standard 2" x 2". An adapter sleeve converts the top receiver to 2" when needed, so you can use your existing ball mounts, bike racks, or cargo carriers without losing towing capacity. It’s built to handle up to 20,000 lbs gross trailer weight and 2,500 lbs tongue weight — or up to 30,000 lbs GTW and 3,000 lbs TW when paired with TorkLift’s Everest weight distribution system (sold separately).

TorkLift SuperHitch Magnum dual receiver adapter showing 2-1/2-inch top hitch, 2-inch bottom hitch, and included adapter sleeve for versatile towing

Keep Your Camper Hitched and Your Trailer in Tow: Pre-Drilled for Tie-Downs and Extensions

If you run a bed-mounted camper, this setup is ready for it. The hitch comes pre-drilled to accept TorkLift camper tie-downs (sold separately), so you don’t have to modify anything later. You can also add a TorkLift SuperTruss extension (sold separately), which pushes the top receiver out far enough to clear your camper while keeping high towing capacity. Even with an extension as long as 60", this system maintains some of the highest rated towing limits in the industry.

TorkLift SuperTruss hitch extension attached to a truck with a bed camper, extending trailer hitch receiver for towing clearance

Built Strong for Real Work: Heavy-Duty Steel Construction

The SuperHitch Magnum uses sturdy steel with high-penetration, dual-shield welds for serious strength and durability. Reinforced hitch pin holes prevent wear and elongation over time, making it dependable for repeated heavy use. Bolt-on installation means no welding is required, and built-in safety chain loops are ready for whatever you haul. A black powder coat finish protects the metal from rust and corrosion so it keeps looking good under load.

Designed for Maximum Utility: Class V Performance Without Compromise

When you need one hitch that can do it all — tow a large trailer, haul a camper, or carry extra gear — this Class V setup delivers. It’s compatible with industry-standard ball mounts and accessories, includes two hitch pins and clips, and uses a visible 4" x 4" cross tube that ties everything together with strength and stability. With its lifetime warranty coverage, the SuperHitch Magnum is built for years of tough use on the road or jobsite.

Specs

Receiver Openings

  • Top receiver opening: 2-1/2" x 2-1/2"
  • Bottom receiver opening: 2" x 2"
  • Adapter sleeve included: 2" x 2"

Class and Rating

  • Rating: Class V

Weight and Capacity

  • Maximum gross trailer weight: 20,000 lbs
  • Maximum GTW when used with weight distribution: 30,000 lbs
  • Maximum tongue weight: 2,500 lbs
  • Maximum TW when used with weight distribution: 3,000 lbs

Dimensions

  • Cross tube dimensions: 4" x 4"

Technical diagram of TorkLift SuperHitch Magnum showing labeled components and dual stacked receiver design


Warranty

  • Lifetime warranty

F1008-30 Tork Lift Magnum 30K Super Hitch with 2 Receivers



This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.6

68 reviews
5 Stars
(57)
4 Stars
(4)
3 Stars
(2)
2 Stars
(0)
1 Star
(5)
Review Sort Icon
by:
2021 Ford F-350 Super Duty
The product bolted on just as I expected. I added the TorkLift camper tie-downs as my existing TorkLift tie-downs on my factory hitch would not fit.
ETrailer staff is always so helpful and knowledgeable about their products. The shipping was fantastic. I ordered the product on a Thursday evening and received it Saturday afternoon for installation.
by:
2019 Ford F-450 Super Duty
Packaging for the Main Hitch (center Horizontal piece) survived, but the "Package 2" that contained the two vertical attach fittings (very heavy) was a joke (respectfully). Package was busted open when delivered, and I am lucky the (2) fittings were not damaged. For other customers purchasing this product, e-trailer should re-evaluate the packaging for said fittings.
by:
2019 Dodge Magnum
I just removed my old hitch off a 2019 ford f-450 and installed the super hitch magnum. I won't say it is a real easy install but it is easier if you have the correct tools and two people. The installation instructions were very good and the video on etrailer was very helpful. I have not purchased the supertruss yet so we have not towed with it yet . Overall it is very sturdy and should be great to tow behind my truck with the camper on it.
by:
Exactly what I needed and it was easy enough for me to install thanks
by:
Magnum 30K & Camper Tiedowns TLF2022 & TLR3504
by:
2019 Ford F-250 Super Duty
Great job right by my truck
by:
I have owned several different makes of pickup’s and each time I have purchased a Torklift hitch and frame mounted camper tie downs each hitch I have been extremely happy with their products they make Quality Quality they fit perfect every time,they are built by someone who truly cares
by:
Exactly what I expected. This is the best trailer hitch you can get IMO. The box was damaged by the shipping company and some parts were missing (and some others added ??) but the parts were replaced promptly and only added 1 week to 1 week to overall time. I am happy with this hitch and service. The install took about 2 hours and some muscle.
by:
Disappointed that it has rusted through the crappy paint job. I had to trust treat it and touch up these areas. I do like that it is one heavy duty high receiver and works quite well with the 40 inch super truss tow bar that I use with it. I also like how the rear tie downs for my lance 1131 truck camper bolt right to it.
by:
2023 Ford F-350 Super Duty
2023 f350 The ford hitch is nicer but I needed this to be able tow what I want. It sits back further so when I put my spare back in it actually pushed the wheel forward and the cable is at a little bit of an angle now. Not sure if it's a problem or not at this point but if you run tires bigger then oem you may run into some issues. 35 might be fine. 37" may have a fitment issue with the center dif or exhaust pipe.
by:
The superhitch is second to none excellent quality and will not disappoint,the frame mounted tie downs for the campers are a really good investment, I am super happy with those as well,outstanding quality products.
by:
2018 Ford F-350 Super Duty
Super happy with the hitch. Factory hitch bolts were a mother to get off, definitely need a breaker bar as mentioned in the instructions. Once the factory hitch was off going back together was a breeze.
by:
It’s a beast, had no issues with install. Fast shipping and great products
by:
2018 Ford F-350 Super Duty
Items are as described. Shanna was very helpful during the whole process. Price was competitive and shipping was free and fast. Removing the stock hitch from 2018 f350 was difficult. All bolts were torqued to over 100 foot pounds of torque and blue loctite. The install went smoothly.
by:
Ford F-350 Super Duty
My truck is a 2022 F350. There was no fitment for a 2022, but after talking with Ford I was told no changes to the super duty frame so I ordered the hitch for a 2021.
Perfect fit. Very pleased with all Torklift products and my service from Etrailer!!
by:
Works perfect. Fit perfect. Good instructions. Great service and fast shipping. Amazing that you can call and they actually know what they are talking about and can help. I’d give it 6 stars if i could....
by:
2021 Ford F-250 Super Duty
The hitch went on nice with the assistance of a friend with a hoist. I could have done it in my garage but it would have taken much longer. Ordering from e trailer was wonderful. Spoke with a representative and they made sure I got exactly what I needed at a fair price. Shipment was prompt. I’ll definitely order from them again
by:
Packaging was beat up a little, but this is a heavy item, 90lbs just for the center section.
I had it installed in about 2 hours after previously having the old hitch already removed.
A impact gun will be your best friend on this project.
by:
What a quality product! Loved the modular installation design. Good instructions and how-to video.
by:
Great product and great communication regarding shipping updates!
by:
2017 Ford F-350 Super Duty
Very heavy duty and looks great on the truck. Prepare to spend a couple hours putting this on though.
by:
This is my second supper hitch never a problem
by:
Awesome quality products and excellent delivery and customer service.
by:
2021 Ford F-350 Super Duty
Good service from Etrailer as usual!
by:
Pretty quick and easy to install. Super heavy duty.
25
68
true
Show More Reviews

See what our Experts say about this TorkLift Trailer Hitch

  • Will the Torklift Everest Weight Distribution, SuperTruss Extension and Magnum Hitch work together?
    Good question Brian, thanks for reaching out! The Everest Weight Distribution System cannot be used in conjunction with a SuperTruss hitch extension. The reason is that the Everest system # TLWD1000 uses a dual receiver shank that connects directly to the dual receivers of the SuperHitch Magnum # TLF1008-30. The SuperTruss extension # TLE1548 inserts into both receivers at the truck but then ends with a single receiver, so there's no way to attach the Everest shank to the end of the extension. If...
    view full answer...
  • Will 2019 Ford F-450 Require New Rear Tie-Downs Installing TorkLift Hitch
    Hi Steven; if you install the TorkLift SuperHitch Magnum # TLF1008-30 you will need different rear tie-downs for your F-450. The TorkLift Camper Tie-Downs # TLR3504 will replace what you have now. If you switch to a different aftermarket hitch you will still have to swap out the rear tie-downs. Is the concern the capacity when using a hitch extension? The SuperHitch Magnum is the only option that will keep that capacity high enough with longer extensions like # TLE1532 (32") or # TLE1542...
    view full answer...
  • Camper Tie Downs for 2022 Ford F-250 With TorkLift SuperHitch Magnum
    Hey Lonnie! The correct rear tie-downs for your F-250 once you add the TorkLift SuperHitch Magnum # TLF1008-30 are the # TLR3504. What made you decide to upgrade to the TorkLift hitch?
    view full answer...
  • Recommended TorkLift SuperHitch for a 2025 Ford F-250
    Hey Steven welcome back! Sorry to tell you but the TorkLift SuperHitch item # TLF1008-30 stopped fitting the F-350's and F-250's after the 2022 model year when Ford did the generation change. Ford changed the frame on the 14th generation so you're going to need a new hitch. For your 2025 Ford F-250, you'll want the TorkLift SuperHitch Magnum item # TL27CR. This is the same model of hitch with the same capacities just updated for the newer frame for the 14th generation trucks. If you...
    view full answer...
  • Recommended Hitch for a 2019 Ford F-250 that Also Attaches to the Bumper Bolts
    It does not Mike. The B&W Heavy-Duty Trailer Hitch item # BWHDRH25602 is only going to attach to your F-250 at the frame. There are no attachment points that connect to the rear bumper. I linked the installation instructions below so you can see how this hitch attaches to your F-250's frame. The only aftermarket hitch for your 2019 F-250 that utilizes those rear bumper bolts is the TorkLift SuperHitch Magnum Trailer Hitch Receiver item # TLF1008-30. You can see them in the pictures I attached...
    view full answer...
  • Does Torklift Hitch TLF1008-30 Require Washers When Bolting Together
    Hey Kyle, when in doubt always go with what the install instructions show for the install of the Torklift Hitch part # TLF1008-30. Our install pictures and video were probably just trying to get the components together so that it looked good enough for a picture and wasn't thinking in terms of following instructions to a T like they probably should have.
    view full answer...
  • Will A Hellwig Sway Bar Fit A 2023 Ford F-350 With A TorkLift SuperHitch Installed
    The Hellwig Adjustable Big Wig Rear Anti-Sway Bar # HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with the sway bar. You might end up having to loosen the spare tire and then angle it so that it's leaning more on the trailer hitch and then retract it until it's tight. It won't sit flat or retract as high but you'll be able to have both components...
    view full answer...
    Image 1 for
  • Can The Reese RP45018 Extension Be Used To Flat Tow A Jeep Wrangler Behind A 2021 Ford F-350?
    As you Jeep Wrangler weighs 4,200 pounds and you will be using the Reese Titan Hitch Box Extension # RP45018 at the 41" length, there will be no issues using it on your 2021 Ford F-350. You are getting pretty close to the 5,000 pound max capacity though, so I do not recommend adding any extra weight to the Jeep when you are towing it. With that said, I do recommend a couple add on parts to go with this. The Curt # C87UR (for 2-1/2" hitch) and # C27UR (for 2" hitch) anti rattle devices...
    view full answer...
  • TorkLift SuperHitch Magnum Receiver and Tie-Downs For a 2017 Ford F-350 Super Duty 8' Bed
    You will need a new TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1008-30 for your 2017 Ford F-350. The hitch cross bar is longer on the 2017 than the TorkLift Receiver # TLF1002-30 on your 2009 Ford F-350 so new side brackets will not allow you to use the current cross bar that you have. You will be able to use the same Rear TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3504 from your old truck but you will need new Front TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2021
    view full answer...
    Image 1 for
  • Longest Weight Distribution Shank for a 2-1/2 Inch Trailer Hitch Receiver
    All of the Equal-I-Zer 2-1/2 inch weight distribution shanks are 12 inches long. The Equal-I-Zer weight distribution head will also fit Reese shank # RP54976 which is 15 inches long but there are no 2-1/2 inch options that are 18 inches long. What you could do is install the Tork Lift Super Hitch Magnum, # TLF1008-30, on your 2017 Ford F-250 and then use the SuperTruss extension, # TLE1521. The extension is 21 inches and when used with weight distribution it is rated for 14,000 pounds...
    view full answer...
  • Recommend Hitch for a 48" Extension on a 2023 Ford F-350
    To use the TorkLift SuperTruss Hitch Extension 48" Long item # TLE1548 with your 2023 Ford F-350 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item # TLF1008-30. This hitch is custom fit and bolts to your F-350 with included hardware. It fits both the single rear wheel and dually models. I really like this hitch because it has both a 2" and 2-1/2" receiver and a large towing capacity of 20,000 lbs without a weight distribution system. The stacked receivers...
    view full answer...
    Image 1 for Image 2 for
  • Recommendation to Add 36" Extension for Towing 7,500 Pound Boat Trailer with 2017 Ford F-250
    The longest hitch extension we have available for the factory 2-1/2" hitch receiver on your 2017 Ford F-250 is the Reese Extension # RP45292, which provides up to a 34" long extension but doesn't feature the necessary towing weight capacity to safely pull your trailer. Any shorter extender that you might be able to pair with a longer ball mount to get close to the total extension needed isn't going to have enough weight capacity, either. This means your only real option to create this...
    view full answer...
  • Recommended Heavy Duty Trailer Hitch Extension For 2020 Ford F-350
    I do have an option for you, but you are correct that you will need to replace your trailer hitch receiver. For the new trailer hitch receiver you will need the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1008-30 which has a 20000lb max trailer rating and 2500lb max tongue weight rating, but those numbers get bumped to 30000lbs max trailer rating and 3000lb max tongue weight rating when using weight distribution. Now the reason you need the new hitch is to be able to use the...
    view full answer...
  • Parts Needed to Flat Tow 2024 Jeep Wrangler 4xe Behind 2023 F-350 With Truck Bed Camper
    Flat towing your 2024 Jeep Wrangler 4xe will require a base plate, tow bar, safety chains, wiring, and supplemental braking system. I recommend the following: -Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 -Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 -RoadMaster 64" Double Hook, Straight Safety Cables # RM-646 -Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (If your Jeep has the ParkSense Proximity Sensors) -Roadmaster Smart Diode...
    view full answer...
  • Hitch Extender To Tow a Trailer Using 2019 Ford F-250 With Tommy Lift Gate
    In order to install a hitch extender on a 2019 Ford F-250 and retain any sort of weight capacity suitable for towing your only option is one of TorkLift SuperTruss Hitch Extensions like part # TLE1521 which offers 21". That said, in order to use the TorkLift SuperTruss you also need the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLF1008-30 which replaces the factory trailer hitch. I understand this may be more than you were looking to spend and more work than you were looking...
    view full answer...
  • How Much Does TorkLift SuperHitch Magnum # TLF1008-30 Weigh
    TorkLift SuperHitch Magnum Trailer Hitch # TLF1008-30 has a shipping weight of 130 pounds so minus the packaging you are looking at around 125 pounds.
    view full answer...
  • Will TorkLift SuperHitch TLF1008-30 Fit Around 37 Inch Spare Tire
    According to TorkLift, the inside width of their # TLF1008-30 SuperHitch is 39-9/16 inches, measured from inside to inside of the mounting flanges as shown in the provided photo.Given that, your 37's should fit okay within the footprint of the hitch. If equipped, the factory hitch would need to be removed before installing this hitch. I've linked you to product description video featuring the hitch you asked about.
    view full answer...
    Image 1 for
  • What Rear Tie-Down Fit With TorkLift SuperHitch Magnum On a 2023 Ford F-350 Super Duty?
    The TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1008-30 will allow you to mount either the Aluminum # TLR3504A or Steel # TLR3504 camper tie-downs on your 2023 Ford F-350. If you need the matching front tie-downs you will need to select the correct ones for either a 6-3/4' or 8' bed without a step under bed. 6-3/4' Bed Front Mount Aluminum # TLF2022A Steel # TLF2022 8' Bed Front Mount Aluminum # TLF2021A Steel # TLF2021
    view full answer...
  • Correct TorkLift Camper Tie-Downs For a 2019 Ford F-250 Short Bed Truck
    The TorkLift Camper Tie-Downs Front # TLF2022 and Rear # TLF3008 are the mounts you need for your 2019 Ford F-250 short bed with a factory receiver. The Front # TLF2021 tie-down you found will only fit models with an 8' long bed. If your F-250 has the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1008-30 or you plan to upgrade to this you will need the Rear # TLR3504 tie-downs to fit with this receiver rather than the one above which are for a factory receiver. I recommend using...
    view full answer...
  • Recommend Hitch for a 48" Extension on a 2023 Ford F-250
    To use the TorkLift SuperTruss Hitch Extension 48" Long item # TLE1548 with your 2023 Ford F-250 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item # TLF1008-30. This hitch is custom fit and bolts to your F-250 with included hardware. I really like this hitch because it has both a 2" and 2-1/2" receiver and a large towing capacity of 20,000 lbs without a weight distribution system. The stacked receivers give you multiple options for ball mounts and also allow...
    view full answer...
    Image 1 for Image 2 for
  • Longest Weight Distribution Shank
    The longest weight distribution shake is the 18" Long Equal-i-zer Weight Distribution Shank item # EQ90-02-4600. It has an 8" rise, a 4" drop, and has a 600 lbs - 1,400 lbs tongue weight range. I have linked a diagram of both this shank and the standard shank that comes with systems like the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item # EQ37120ET. We also have the 18" Long Equal-i-zer Weight Dist Shank Item # EQ90-02-4500 that only has a 7" rise and 3" drop. As you...
    view full answer...
    Image 1 for Image 2 for
  • Extension for 2019 F-450 With TorkLift SuperHitch Magnum and Host Mammoth 11.6 Camper
    Hi Steven, welcome back! The only way to know which extension you need is to measure. This will ensure you have enough clearance for whatever you're towing with that setup. If you have the camper mounted in the truck, measure from the face of the truck's rear bumper to the outside edge of the camper's bumper. If the camper is not mounted on the truck: 1. Measure from the inside of the front of your truck bed to the outside face of the truck's rear bumper. 2. Measure the camper's overall...
    view full answer...
  • Can TorkLift Everest Weight Distribution be Used with a SuperTruss Extension
    You have purchased the TorkLift SuperHitch Magnum # TLF1008-30, SuperTruss extension # TLE1548, 7-Way extension # TLW6548, ball # C40085, Everest weight distribution system # TLWD1000, and shank # TLM9011. The hitch and SuperTruss extension along with the 7-Way extension are compatible with each other. The shank, # TLM9011, is compatible with the Everest system, # TLWD1000. But the shank is not compatible with the SuperTruss extension. You can use the Everest system with the shank directly...
    view full answer...
  • Availability Of Weight Distribution System For Trailer With 2000lb Tongue Weight
    There is one weight distribution hitch option that is rated for the 2000lb tongue weight you mentioned, but it will require you to replace the trailer hitch receiver on your 2021 Ford F-350 Dual Rear Wheel. The TorkLift SuperHitch Everest Weight Distribution System - 30,000 lbs GTW, 3,000 lbs TW # TLWD1000 will work with tongue weights ranging from 1500-3000lbs but will only work with their TorkLift Magnum Dual Receiver Trailer Hitch Receivers. For your 2021 Ford F-350 you would need...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B
Employee Amanda M
Written by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Thomas T
Video by:
Thomas T
Employee Jacob H
Test Fit:
Jacob H
Employee Clayton O
Test Fit:
Clayton O

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924