Skid Wheel Recommendation for 27 Foot Long Motorhome

Question

Question:

This class A is 27feet long. The skid elbows are set forward, the stabilizers drag, and I already bent one of the ground feet

asked by: Michael D

0

Expert Reply:

Hey Michael, you will want to go with a set of skid wheels for your motorhome like the Ultra Fab # UF48-979012 which will prevent the dragging. These attach to the frame and roll instead of dragging. Where are you dragging the most?

expert reply by: Jameson C

0

Skid Wheels
(click to enlarge)

Michael D.

7/27/2026

Thank you I will look into it

Jameson C.

7/27/2026

@MichaelD glad to help! Let me know if you have any other questions.

Answer 1

Hey Mike, for that heavy and long of an RV the skid wheels you'd need are the Ultra Fab part #UF48-979012 which can swivel too so they will do a great job preventing your trailer from dragging.

view full answer...

Answer 2

I went out to our warehouse and pulled the Ultra-Fab Skid Wheels for Class C RVs part #UF48-979012 for you. The dimensions of the following components are as follows: The metal mounting brackets are 8-1/2" long X 4-1/2" wide. The two…

view full answer...

Answer 3

The best skid wheels for your 31 foot Forest River Forester are going to be the Ultra-Fab Skid Wheels #UF48-979012. The 5" diameter wheels are bolted to brackets which are welded onto your RV's frame. Please keep in mind skid wheels are only…

view full answer...

Answer 4

You could mount some skid wheels to the frame by your stabilizers to have them hit first and protect the stabilizers and the rest of the undercarriage from scraping when coming out of a steep incline/decline. I recommend ones like the Ultra-Fab Skid…

view full answer...

Answer 5

While we carry some very solid products when it comes to skid wheels, such as the Ultra-Fab Hitch Mounted, #UF48-979017 that you linked to and the even stronger Ultra-Fab Skid Wheels for Class A RVs 34' and Longer, #UF48-979013; these are not…

view full answer...

Answer 6

As shown in the linked photo that I have prepared for you the bracket dimensions on the Ultra-Fab Hitch Mounted Steel Rollers #UF48-979017 are 4-inches x 5-3/8-inches. The height from the bottom of the roller wheel to the top of the mounting flange…

view full answer...

Answer 7

Hey Mark, thanks for reaching out! For something similar to the Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter #UF48-979017 we have the Ultra-Fab Rotating, Hitch Mounted Skid Wheels #UF48-979014 which…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Skid Wheel Recommendation for 27 Foot Long Motorhome

Product Page this Question was Asked From

Continue Researching