Skid Wheel Recommendation for 2021 Palomino Puma 32BHQS

Question

Question:

Ive a 2021 Palomino Puma Travel Trailer 32BHQS. Im looking for a set of wheel skids so the trailer doesnt drag. What do you recommend?

asked by: Mike

0

Expert Reply:

Hey Mike, for that heavy and long of an RV the skid wheels you'd need are the Ultra Fab part # UF48-979012 which can swivel too so they will do a great job preventing your trailer from dragging.

expert reply by: Jameson C

0

Jameson C.

9/8/2025

Hey Mike, did the Ultra Fab skid wheels work out for your trailer? I'm asking because your experience could help others with similar RVs.

Answer 1

Hey Michael, you will want to go with a set of skid wheels for your motorhome like the Ultra Fab #UF48-979012 which will prevent the dragging. These attach to the frame and roll instead of dragging. Where are you dragging the most?

view full answer...

Answer 2

The best skid wheels for your 31 foot Forest River Forester are going to be the Ultra-Fab Skid Wheels #UF48-979012. The 5" diameter wheels are bolted to brackets which are welded onto your RV's frame. Please keep in mind skid wheels are only…

view full answer...

Answer 3

I went out to our warehouse and pulled the Ultra-Fab Skid Wheels for Class C RVs part #UF48-979012 for you. The dimensions of the following components are as follows: The metal mounting brackets are 8-1/2" long X 4-1/2" wide. The two…

view full answer...

Answer 4

You could mount some skid wheels to the frame by your stabilizers to have them hit first and protect the stabilizers and the rest of the undercarriage from scraping when coming out of a steep incline/decline. I recommend ones like the Ultra-Fab Skid…

view full answer...

Answer 5

While we carry some very solid products when it comes to skid wheels, such as the Ultra-Fab Hitch Mounted, #UF48-979017 that you linked to and the even stronger Ultra-Fab Skid Wheels for Class A RVs 34' and Longer, #UF48-979013; these are not…

view full answer...

Answer 6

Hey Mark, thanks for reaching out! For something similar to the Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter #UF48-979017 we have the Ultra-Fab Rotating, Hitch Mounted Skid Wheels #UF48-979014 which…

view full answer...

Answer 7

As shown in the linked photo that I have prepared for you the bracket dimensions on the Ultra-Fab Hitch Mounted Steel Rollers #UF48-979017 are 4-inches x 5-3/8-inches. The height from the bottom of the roller wheel to the top of the mounting flange…

view full answer...

Answer 8

I do have suspension enhancement options for a 2002 Workhorse P42 Chassis but there are no air bags available unfortunately. Instead, you can use the Timbren Rear Suspension Enhancement System. The correct one will be based off the suspension. The…

view full answer...

Answer 9

The Ultra-Fab Rotating Hitch-Mounted Skid Wheels #UF48-979014, once bolted on the hitch tube on your Class C RV, will extend down from the bottom of the hitch tube by 6-inches. This includes the thickness of the bottom mounting plate all the way down…

view full answer...

Answer 10

I do have an option for you. Due to the length of your 5th wheel and size of your bumper, we do not have a bolt-on option available. That being said, you can use the Ultra-Fab Steel Jumbo Roller for Trailers and RVs #UF48-979023 which is a weld-on…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Skid Wheel Recommendation for 2021 Palomino Puma 32BHQS

Products Featured in This Question

Continue Researching