bing tracking image
Q & A Icon

Replacement Air Conditioners for 2022 Grand Design Solitude 390RK  

Updated 07/24/2026 | Published 07/17/2026

Question:

I have a 2022 Grand Design Solitude 390RK. It has 3 Coleman Mach rooftop A/C systems. The one in the Livingroom is a heat pump, the ones in the kitchen and Bedroom are straight cool. All 3 systems have their own t-stat. The one in the Bedroom needs replacing and I would like to go back with a heat pump. All 3 systems are ducted and the ones in the kitchen and bedroom also have vents on the roof unit. The t-stat in the Livingroom also controls the furnace. The Livingroom system is larger higher btus than the ones in the kitchen and bedroom. I will eventually replace all 3 units with the Chill Cube. I definitely will go with the 18k btu for my Livingroom but not sure what size I need for the kitchen and bedroom. Can you help out with this. I know that all 3 systems will have to be a complete change out, due to the new refrigerant, so that is not a problem at all. Thank you for your help!!!! Scott

0

Expert Reply:

Hey Scott,

Thanks for your question—and that's an awesome setup. If you'd like to replace the bedroom A/C with a Furrion unit that includes a heat pump, the Furrion Chill Cube RV Air Conditioner with Heat Pump # FR59TQ is an excellent option.

One thing to keep in mind is that the # FR59TQ is rated at 18,000 BTU, which is a significant increase in cooling capacity over your current bedroom unit. Based on the information I found for your 2022 Grand Design Solitude 390RK, the factory setup typically includes:

Living room: 15,000 BTU heat pump
Kitchen: 13,500 BTU A/C
Bedroom: 13,500 BTU A/C

So, moving to the 18,000 BTU Chill Cube in the bedroom would provide considerably more cooling capacity than the original Coleman Mach unit.

At this time, Furrion doesn't offer a smaller-capacity heat pump model outside of the Chill Cube lineup. When you're ready to replace the kitchen A/C, a great option would be the Furrion Chill HE RV Air Conditioner System with Thermostat - 15,000 BTU - Single Zone - R32 # FR83TD. While it doesn't include a heat pump, it would still give you a noticeable increase in cooling performance over the factory 13,500 BTU unit.

Do you have any trips planned this summer with your Solitude?

expert reply by:
0
Christopher H
Scott K. profile picture

Scott K.

7/22/2026

Thank you for the help, Christopher!!!! I am actually working in Florida, so I am staying in it quite a bit this summer.

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/22/2026

@ScottK Glad you're putting it to good use! Hopefully you're getting some leisure time as well. Let us know when if you have any other questions.
George F. profile picture

George F.

7/23/2026

I replaced both of my 15000 btu acs on my 2020 2816 atc tow behind camper with furrion chill cube ac / heat pump 18000 btu. We have Ben using them constantly for the last month and we love them . They use less power on cold and hot . They also come to temp quickly and more quietly than the old ge units . We use the heat option at night to warm up each zone as needed .the only problem we had is hooking up the gas furnace . We had to run two wires to the case and install a new 12 v thermostat. The install was easy useing the 120 wires for the unit and the small wires for the thermostat .

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/23/2026

@GeorgeF That's awesome! Sounds like they've been a pretty big upgrade over the old GE units. Appreciate you mentioning the furnace wiring too—that'll definitely save others time troubleshooting an install. Thanks for taking the time to come back and share how it's been working after putting them to good use!
David P. profile picture

David P.

7/23/2026

I have a Forest River 39' 5th wheel which had 2 Coleman Mach rooftop A/C systems, one in the Kitchen and the other in the bedroom, both tied into the same duct system. These units would not keep the 5th wheel cool so I switched them out for the Furrion Chill Cube RV Air Conditioner with Heat Pumps. These do a lot better job of keeping the trailer cool. Because both are 18,000btu units I had to change the vents in the bedroom to closing vents to regulate the cold air because the bedroom unit would freeze you out of the bedroom. So far everything is working good. One thing I would do is not use the furrion wall thermostat, instead I would use the hand remotes to control the units and use a single zone wall thermostat for the gas furnace control. I didn't like how the furrion wall thermostat controlled the gas furnace.

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/24/2026

@DavidP Thanks for coming back and sharing your experience. As you covered, most folks do notice a big difference in cooling power when switching to the Chill cubes. I guess getting frozen out of the bedroom can be good and bad depending on the situation. Glad these are working well for you!
Erling R. profile picture

Erling R.

7/24/2026

Hey Scott. I purchased a Chill Cube last year for my motorhome, and set it up to run on an inverter so no 120V shore power required. We LOVED it. This year I have upgraded to a new (very old) motorhome, and the first thing I did was buy two new Heat Pump Chill Cubes. My old AC even work, but I know where I am going (another inverter) and loved the Chill Cube. GAME CHANGER. Why? Much more efficient, 18k BTU for the input electricity of a 13.5k unit. QUIET, especially when you only need a little cooling, it slows down and can barely be heard. I bet you didn't think that was possible. No starting surge, it starts slowly so has no big hit on the RV electrical system, this is good for everything, especially if you are running close to your shore power limit. Remote control....which can also act as the temperature sensor so you can set the temperature where you are sitting, not at the wall with the sun hitting it on the other side (like our old temperature sensor). All in all, this design (my first one was non-ducted with two motors, my two new ones are ducted with one internal motor) is fantastic and feels like they let the engineers make the best product rather than hit some price point. Sometimes you are willing to pay for the best....and this is one of those times your wife will agree with you! The down side. Controlling the furnace. In my first install last year I actually kept the old AC control board and shoved it in the Chill Cube. The thermostat thinks the old AC is there, and will run the furnace the same way it did before. In the install I did this week, with the heat pumps, the Chill Cube thermostat has inputs for two wires from the furnace to do the controlling, but my motorhome has the furnace wires in the ceiling, so I will need to tackle that challenge getting wires from the furnace to the thermostat. The other thing I noticed, is that the Chill Cube creates its own 12V signal, so you don't need 12V input.....but, when the shore power is off, so is the thermostat, so no furnace. Be careful to run your 12V power for the old units to the thermostat (this is easier than it sounds if you remember this), so you can control the furnace on a cold day when not connected to shore power. Overall I am so thankful to Furrion for creating an Air Conditioner that uses modern electronic technology like cordless drills, electric cars and so much else. Some people want cheap, I am not one of those people, I want to be cool in a quiet environment, and thankfully, that isn't too much to ask.

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/24/2026

@ErlingR This is awesome. Thanks for taking the time to write all of this up. Appreciate you sharing the details about the furnace wiring and thermostat. That's the kind of real-world install experience that's hard to find and will definitely help the next person. Enjoy the new motorhome and those Chill Cubes!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>