Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep hot, muggy RV days from taking over your trip. This complete 18K ducted Chill Cube kit includes the rooftop AC, air distribution box, remote, and wall thermostat, with 445 CFM airflow, variable-speed cooling, and heat pump comfort.
Building a ducted RV AC setup gets easier when the main pieces are already matched. This kit includes the 18,000 Btu rooftop Chill Cube AC with heat pump, low-profile ducted air distribution box, remote control, single-zone wall thermostat, and thermostat adapter harness. The air distribution box connects the rooftop unit to your RV's ducted airflow system, while the thermostat and harness give you a dedicated wall-control setup instead of relying only on ceiling or remote controls.
In a ducted RV, cooling power is only part of the story. The AC also has to move air through the ceiling ductwork before it reaches the rooms and vents farther from the unit. This Furrion Chill Cube gives you 18,000 Btu of cooling capacity and 445 CFM of airflow, helping bring cabin temperatures down while pushing cooled air through longer duct runs more effectively.

A traditional AC often cools hard, shuts off, then starts again once the cabin warms back up. That can leave your RV bouncing between too warm and too cold, especially during long cooling stretches. The variable-speed compressor adjusts output as conditions change, helping the system stay closer to the temperature you want instead of constantly cycling on and off. Continuous operation also helps improve efficiency and dehumidification, while Turbo Cool mode helps bring the RV down to temperature faster when the cabin is hot. Because of this variability, the system runs noticeably quieter than many traditional RV ACs, making it less distracting during TV time, conversation, or sleep.
Cool mornings and shoulder-season trips do not always call for firing up a furnace. This unit has a built-in 17,000 Btu heat pump that can provide electric warmth without using propane. In cooling mode, the system moves heat out of the RV. In heat pump mode, it reverses that process and pulls available heat from the outside air into the coach. It is useful for mild, cooler conditions, but it is not meant to replace your main furnace in cold weather.

You have more than one way to manage comfort inside the RV. The air distribution box includes a keypad for ceiling control, and the remote lets you make adjustments from your seat or bed. The Follow Me function senses temperature near the remote, helping the system respond to the area you are actually using. For a fixed control point, the included wall thermostat has a backlit LCD display, touch controls, Turbo Cool mode, Energy-Saving Gear mode, Auto Function, program timers, and Auto Restart.

The included thermostat adapter harness is made for ducted Furrion Chill Cube systems and lets the wall thermostat integrate with an existing furnace in a single-zone setup. It also supports a wall-thermostat control path when you want a dedicated control on the wall instead of depending on standard remote operation. That gives you a more familiar RV comfort setup, especially if you already manage heating from a wall control.
Humid air can make an RV feel sticky and heavy, even after the temperature starts to drop. While it cools, this unit removes up to 1.8 pints of moisture per hour, helping reduce that damp, clammy feeling on your skin and making the cabin feel less muggy. That extra moisture removal helps the space feel more comfortable on humid camping days when cold air alone is not enough.
You are not always plugged into a full-power campsite when the RV starts heating up. This Chill Cube is 2,000W generator or inverter ready, giving you more flexibility for campgrounds, travel stops, and off-grid setups when paired with the right power source. Battery saver modes also help manage power use when you are trying to stretch your available energy. This unit runs on 115V, 60Hz power, with 1,480 watts of cooling power consumption, 15.8 amps of cooling current draw, and 11.9 amps of heating current draw. Those numbers give you something concrete to compare against your RV electrical system, generator, inverter, or campsite power before installation.

Installing a ducted AC system means lifting the rooftop unit onto the RV, sealing the roof opening, connecting the air distribution box, and setting up the wall thermostat and adapter harness correctly. Having the rooftop unit, air distribution box, remote, thermostat, and harness in one kit helps reduce parts-matching questions, but installation is still a job where the right help can make a difference. If you'd like help installing your air conditioner, check out our Installer Locator to find an installer near you.
This system is not backward compatible with Furrion AC systems from 2024 and earlier.
R32 refrigerant meets 2025 EPA regulations.
Ratings & Reviews

Mike L.
10/22/2026
Thank you Sir, we appreciate that!!
Do you have a question about this RV Air Conditioner?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Mike L.
10/22/2026
Thank you Sir, we appreciate that!!