Which Hellwig Anti-Sway Bar is Right for My 4-Wheel Drive 2026 Ford F-350?

Question

Question:

I am looking for a rear sway bar for my 2026 Ford F 350 4x4. Which is the proper one for my truck. The HE97MR or the HE94FR. I cant find anything that says if they fit a 2 wheel drive or 4 wheel drive or if it makes a difference.

asked by: Rick S

0

Expert Reply:

Hey Rick!

For your 2026 Ford F-350 Super Duty with 4WD, you will go with Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter # HE94FR. This model is intended for 4-wheel drive models that sit at stock height. The Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter # HE97MR is a fit for 2-wheel drive trucks. Have you been experiencing pretty bad sway with that new truck? Are you using it to tow trailers, campers, or something else?

expert reply by: Jerry B

0

Karlnash

7/11/2026

Hey Rick, I have a 2025 F350 DRW 4x4 with this bar. I carry a 4500 pound slide in camper in the back and this helps quite a bit with sway.

Jerry B.

7/13/2026

@Karlnash Thanks for sharing your experience, that's super helpful! Where have you been taking your truck camping?

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 12

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Which Hellwig Anti-Sway Bar is Right for My 4-Wheel Drive 2026 Ford F-350?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching