Replacement Covers for Andersen Rapid Hitch Greaseless Alumiball

Question

Question:

can I just replace the greaseless cover on the ball hitch

asked by: Bobby S

0

Expert Reply:

Hi Bobby,

Yes, you can! We have both 2" and 2-5/16" replacement caps for the Andersen Rapid Hitch Greaseless AlumiBall Combo - 2" Hitch - 6" Drop/Rise - 10K - Black # AN26VR. Replacement Nylon Cap for Greaseless HardBall Hitch Ball with 2" Diameter # AM3664-2 and Replacement Nylon Cap for Greaseless HardBall Hitch Ball with 2-5/16" Diameter # AM3664-2516 are confirmed replacements. Are you just wanting an extra or did you lose one of your caps?

expert reply by: Jerry B

0

Bobby S.

6/19/2026

Yes I lost one it’s for the older model the one with out the groves I would like to order 1 - 2” and 2 - 2 & 5/16 s if there in stock ? What days and times are you open

Jerry B.

6/19/2026

@BobbyS You can give our customer service line a call Monday-Saturday 7AM-9PM central time and Sundays 10AM-6PM. The phone number is at the top of the page, under our etrailer logo for your convenience!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Answer 8

Hey Jonathan, We do have a kit from Infinite Rule for locking pins specifically for that B&W Tow And Stow With Pintle #IR52FR. This comes with the specific locks needed for that pintle hook you have and will have all points lockable. What are you…

view full answer...

Answer 9

Hello Thad, Thanks for getting that drawing to me. I went ahead and pulled the Patriot Hitches 2" Adjustable Drop Hitch Adapter - 11" Rise/Drop - 7K - Gloss - Silver Accent #PH38PR from the warehouse so I could compare it to your drawing.…

view full answer...

Replacement Covers for Andersen Rapid Hitch Greaseless Alumiball

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching