Different trailers rarely line up to the same height. This adjustable mount makes it easy to match the coupler to your hitch every time. With up to a 6" drop or rise and 1" incremental adjustments, you can dial in a level setup for smoother tracking and even load handling across all your trailers.
If you tow more than one type of trailer, swapping hardware is a hassle. The combo ball on this mount flips between 2" and 2-5/16" sizes in seconds, covering a wide range of setups without tools. The 2" ball handles up to 10,000 lbs GTW, while the 2-5/16" ball steps up to 12,500 lbs GTW—each ready for heavy-duty towing.
Traditional hitch balls need constant grease and cleanup. The greaseless design here stays smooth and quiet without the sticky buildup, so you can hitch up fast and stay clean. It’s built for consistent performance and less maintenance trip after trip.
Heavy trailers demand gear that won’t quit. The aluminum shank keeps strength high while resisting corrosion and wear over time. The matte black finish stays looking sharp through miles of towing, and every part is made to meet V5 and SAE J684 safety standards for dependable performance under load.
Getting this mount ready is straightforward—slide it into your 2" x 2" receiver, choose from two hitch pin hole positions (8" or 9-5/8" from the center of the ball), lock it in, and go. It’s a solid, no-nonsense setup that keeps your towing gear ready whenever you are.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
How's it going, neighbors This is Ed here with etrailer.com and today, we're taking a look at the AlumiBall dual greaseless ball system from Andersen Hitches. Now this guy right here is designed to give you the proper adjustment that you need to get level with your camper or trailer. So let's take a closer look and see what's special about it. So the first thing that stands out to me is the black anodized finish. So this finish is actually a coating that's gonna allow your ball mount to look nicer for longer. It's also gonna help hide those signs of abuse for being a ball mount on the back of a pickup.
On the front, you're gonna have a dual ball. You have a 2 5/16 that's rated up to 12,500 pounds. And you have a two-inch ball, it's rated right up to 10K. 1,500 tongue weight in general, and you're also able to adjust this guy in one-inch increments. As far as switching over to your different type of ball or for your drop or rise, it's just as easy as using the included pin.
Out the box, you won't receive a pin and clip or a lock, and I would suggest adding on an additional lock just to keep your investment secure. Now as far as the end of our shank here, you can see it's a solid aluminum piece here, and it feels pretty hefty in my hand, even though it's very lightweight for the rating. You're able to get this guy set up right in. And also the angle here is designed to make it easier for aligning into your receiver opening. So you can drop this guy lower, if you go to like a rental store and rent a mulcher or something that comes on a trailer that you would put on a hitch.
So you have a lot of flexibility with this ball mount. In general, Andersen does a real good job as far as using quality materials, and it's made right here in the US and that's just good for everyone. Now when you look at objects like ball mounts and towing equipment, I usually just focus on the quality of the material over the brand. And Andersen is just one of those go-to brands that I can always basically blindly recommend to people 'cause in general, this is a lot, something like this is just to allow you to not worry about how you're gonna get your trailer or camper to where you need it to go so you can focus on the real things of making memories. 'Cause here at etrailer, we're just a community of enthusiasts, and we would love to see how you're setting up and using your Andersen ball mount.
So again, this is Ed with etrailer.com taking a look at the anodized black Andersen Hitches AlumiBall with greaseless balls. Have a great day.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Great quality and finish!
This hitch is second to none! Great American craftsmanship, fits good, great design. And, as usual e-trailer delivery & customer service is fantastic! Thanks.
This was the perfect solution for the squatting issue I was having towing my new trailer with my SUV.
This product is really different with the all aluminum design. I wanted some
top rated hitch that won't rust up, even though other steel hitches are usually just experiencing surface rust. It has the numbers for towing I need and I don't know how anything could be improved.
I like that it's aluminum so it's easy to move around and fast to set up. I got the Andersen locking bolts for security as well. I normally tow a 5th wheel but have an occasional need to tow conventional trailers so got this mount. For those who want to keep it installed, you can't flip around the balls on the inside because the mounting slots are only on the outside. That's not an issue for me because it's removed when not being used. All in all very happy with it
Well made US product
Practical hitch, good looking
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.